Contents

Articles in the same Issue

1. Inhalt/Contents
2. Contents
3. Fachbeiträge/Technical Contributions
4. Tribologie – 50 Jahre interdisziplinäre Reibungs- und Verschleißforschung
5. Synthetic method to investigate self-loosening of suspension fasteners considering nonlinear tire characteristics at the adhesion limit
6. Salt fog corrosion behavior of friction stir welded AA2014-T651 aluminum alloy
7. Improving the performance of cementless knee prosthesis coating through functionally graded material
8. Processing and characterization of graphene nano-platelet (GNP) reinforced aluminum matrix composites
9. Effect of thickness on structural, corrosion and mechanical properties of a thin ZrN film deposited by medium frequency (MF) reactive sputtering
10. Influence of welding parameters on the fracture of PE300 polyethylene friction stir spot welds
11. Weldability of 5754 aluminum alloy using a pulsed Nd:YAG micro scale laser
12. Improving the visibility of phase gratings for Talbot-Lau X-ray imaging
13. Vergleich von zerstörungsfreien und zerstörenden Prüfungen dünner Strukturklebungen in der Umformtechnik
14. Fracture behavior of an empty hole using the digital laser dynamic caustic method under directional controlled blasting
15. Effect of ZrSiO₄ on the corrosion behavior of MgO-FeAl₂O₄ composite refractory materials
16. Time dependent hardness and residual stress reduction in a shot-peened aluminum alloy 2024-T351
17. A validation experiment on indium recovery by electrowinning of aqueous electrolytes: Optimization of electrolyte composition
18. Qualitätssicherung von Fahrzeug-rädern aus Leichtmetallguss
19. Comparison of electrical energy consumption for different material processing procedures