Article
Licensed
Unlicensed
Requires Authentication
Ein einfaches Modell für die Kinetik der Rekristallisation
-
Hein Peter Stüwe
Published/Copyright:
February 15, 2022
Abstract
Ein stark vereinfachtes Modell für die Kinetik der Rekristallisation wird vorgestellt und mit der Avrami-Gleichung verglichen.
Abstract
A strongly simplified model for the kinetics of recrystallisation is presented and compared with the Avrami equation.
Keywords: Recrystallisation; Kinetics
Literatur
1 Kolmogorov, A.N.: Bull. Ac. Sci. U.S.S.R. Phys. Ser. 3 (1937) 555.Search in Google Scholar
2 Johnson, A.M.; Mehl, R.F.: Trans. Am. Inst. Min. Engrs. 135 (1939) 417.Search in Google Scholar
3 Avrami, M.: J. Chem. Phys. 7 (1939) 103.10.1063/1.1750386Search in Google Scholar
4 Avrami, M.: J. Chem. Phys. 8 (1940) 212.10.1063/1.1750631Search in Google Scholar
5 Avrami, M.: J. Chem. Phys. 9 (1941) 177.10.1063/1.1750872Search in Google Scholar
6 Voronoi, G.: J. Reine u. Angew. Math. 134 (1908) 198.10.1515/crll.1908.134.198Search in Google Scholar
7 Stüwe, H.P.; Padilha, A.F.; Siciliano, F.: Acta Mater, (eingereicht).Search in Google Scholar
Received: 2001-03-21
Published Online: 2022-02-15
© 2001 Carl Hanser Verlag, München
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Frontmatter
- Editorial
- Günter Lange 65 Years
- Aufsätze/Articles
- Deformation and Microstructure of Titanium Chips and Workpiece
- Eigenspannungsabbau in zügig und zyklisch beanspruchten Schweißverbindungen
- Bruchmechanische Nachweise zur Stahlgütewahl für moderne Feinkornbaustähle
- Experimental Analysis of the Interaction of “Hot” and “Cold” Volume Elements during Thermal Fatigue of a Cooled Component Made from AISI 3161 Steel
- Microstructure and Cyclic Deformation Behavior of Wheel and Tire Steels in Technically Relevant Heat Treatments
- Dehnratenabhängige Beschreibung der Fließkurven für erhoöhte Temperaturen
- Ein einfaches Modell für die Kinetik der Rekristallisation
- Determination of the Elastic Modulus of Wear Resistant Coatings by Quantitative Acoustic Microscopy
- Processing, Microstructure and Properties of Nb–TiO2 ODS Materials for Surgical Implants
- Influence of Surface Treatment on the Pitting Corrosion Behaviour of High Alloyed Stainless Steels in a Chloride Solution
- Unfall durch Drahtseilriss in einer Tunnelbaustelle
- Synthesis of Nanocrystalline B2 Structured (Ru, Ir) Al in the Ternary Ru–Al–Ir System by Mechanical Alloying and its Thermal Stability
- Preparation of Ca-α-sialon Ceramics with Compositions along the Si3N4-1/2 Ca3N2:3AIN Line
- SiC–Si3N4 Nanocomposite Prepared by the Addition of SiO2 + C
- Ceramics in the Si3N4–ZrO2–CeO2 System: Phase Composition Changes and Properties
- The Al–Ca System, Part 1: Experimental Investigation of Phase Equilibria and Crystal Structures
- The Al–Ca System, Part 2: Calorimetrie Measurements and Thermodynamic Assessment
- Phase Relationships of the Gd-Zn System
- Ableitung des Kristallisationspfades in ternären Gusslegierungen
- Bildanalyse komplexer Werkstoffgefüge durch Texturanalyse und Korrelation mit den Eigenschaften durch neuronale Netze
- Grain Growth in the Nanocrystalline W–Cu and Cu–Pb Composite Powders Prepared by Mechanical Alloying
- Toughening and Strengthening Response in Ni3Al-Bonded Titanium Carbide Cermets
- Creep Behavior of γ-TiAl-Based Alloys with Fully Lamellar Microstore
- Elevated Temperature Deformation of P/M Dispersion - Strengthened Copper and Aluminium
- Evolution of the Microstructure during Hot Working of Gamma-Based TiAl Alloys
- Interface Motion of β-Silicon Nitride in a Liquid Phase
- Internal Friction and Creep of Titanium Aluminides with Different Microstructure
- Mitteilungen/Notifications
- Personen
- Conferences
Articles in the same Issue
- Frontmatter
- Editorial
- Günter Lange 65 Years
- Aufsätze/Articles
- Deformation and Microstructure of Titanium Chips and Workpiece
- Eigenspannungsabbau in zügig und zyklisch beanspruchten Schweißverbindungen
- Bruchmechanische Nachweise zur Stahlgütewahl für moderne Feinkornbaustähle
- Experimental Analysis of the Interaction of “Hot” and “Cold” Volume Elements during Thermal Fatigue of a Cooled Component Made from AISI 3161 Steel
- Microstructure and Cyclic Deformation Behavior of Wheel and Tire Steels in Technically Relevant Heat Treatments
- Dehnratenabhängige Beschreibung der Fließkurven für erhoöhte Temperaturen
- Ein einfaches Modell für die Kinetik der Rekristallisation
- Determination of the Elastic Modulus of Wear Resistant Coatings by Quantitative Acoustic Microscopy
- Processing, Microstructure and Properties of Nb–TiO2 ODS Materials for Surgical Implants
- Influence of Surface Treatment on the Pitting Corrosion Behaviour of High Alloyed Stainless Steels in a Chloride Solution
- Unfall durch Drahtseilriss in einer Tunnelbaustelle
- Synthesis of Nanocrystalline B2 Structured (Ru, Ir) Al in the Ternary Ru–Al–Ir System by Mechanical Alloying and its Thermal Stability
- Preparation of Ca-α-sialon Ceramics with Compositions along the Si3N4-1/2 Ca3N2:3AIN Line
- SiC–Si3N4 Nanocomposite Prepared by the Addition of SiO2 + C
- Ceramics in the Si3N4–ZrO2–CeO2 System: Phase Composition Changes and Properties
- The Al–Ca System, Part 1: Experimental Investigation of Phase Equilibria and Crystal Structures
- The Al–Ca System, Part 2: Calorimetrie Measurements and Thermodynamic Assessment
- Phase Relationships of the Gd-Zn System
- Ableitung des Kristallisationspfades in ternären Gusslegierungen
- Bildanalyse komplexer Werkstoffgefüge durch Texturanalyse und Korrelation mit den Eigenschaften durch neuronale Netze
- Grain Growth in the Nanocrystalline W–Cu and Cu–Pb Composite Powders Prepared by Mechanical Alloying
- Toughening and Strengthening Response in Ni3Al-Bonded Titanium Carbide Cermets
- Creep Behavior of γ-TiAl-Based Alloys with Fully Lamellar Microstore
- Elevated Temperature Deformation of P/M Dispersion - Strengthened Copper and Aluminium
- Evolution of the Microstructure during Hot Working of Gamma-Based TiAl Alloys
- Interface Motion of β-Silicon Nitride in a Liquid Phase
- Internal Friction and Creep of Titanium Aluminides with Different Microstructure
- Mitteilungen/Notifications
- Personen
- Conferences
