Xylan deposition onto eucalypt pulp fibers during oxygen delignification
Abstract
A novel alternative was investigated for elevating the xylan content of eucalyptus pulp through xylan deposition in the course of the oxygen delignification stage. The pH in the range of 10–13 was the only variable evaluated, while the other variables were kept constant in a range similar to industrial practice. Xylans were obtained from unbleached and bleached eucalyptus pulps by cold caustic extraction (CCE), giving rise to brown xylan liquor (BXL) and white xylan liquor (WXL), respectively. The liquors were added to a commercial brown pulp during oxygen delignification. The xylan-enriched pulps were subsequently bleached to 90% ISO with the D(EP)D sequence, beaten in a PFI mill and evaluated for their physical and mechanical properties. Xylan deposition occurred at variable degrees depending upon the pH. Pulp bleachability was not impaired by WXL xylan deposition but was slightly negatively affected by BXL xylan. Pulp beatability was improved by both WXL and BXL xylan deposition. The deposited xylan was more stable across bleaching and beating with the WXL xylan than the BXL xylan deposits. At low energy consumption, the deposited xylan improved pulp physical and mechanical properties. Xylan extraction by CCE with subsequent deposition in the oxygen delignification is an interesting technique to manufacture eucalypt pulps of high xylan content. The potential for industrial application is high as no significant modification of current pulp mill installations is needed.
©2011 by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Editorial
- EWLP 2010, 16th–19th August 2010, Hamburg, Germany
- Review
- Bio based fuels and fuel additives from lignocellulose feedstock via the production of levulinic acid and furfural
- Original Papers
- Optimization of steam pretreatment conditions for enzymatic hydrolysis of poplar wood
- Fungal pretreatment of pine wood to reduce the emission of volatile organic compounds
- Dilute acid pretreatment of starch-containing rice hulls for ethanol production
- Studies of the chemoenzymatic modification of cellulosic pulps by the laccase-TEMPO system
- Development of an integrated thermal and enzymatic hydrolysis for lignocellulosic biomass in fixed-bed reactors
- A larch based biorefinery: pre-extraction and extract fermentation to lactic acid
- Lignins as agents for bio-protection of wood
- Isolation and characterization of the phenolic fractions of wood pyrolytic oil
- Purification of Eucalyptus globulus water prehydrolyzates using the HiTAC process (high-temperature adsorption on activated charcoal)
- Disintegration and dissolution kinetics of wood chips in ionic liquids
- Ionic liquids as media for biomass processing: opportunities and restrictions
- Autohydrolysis of birch wood
- Solvent extraction as a means of preparing homogeneous lignin fractions
- Conditioning of SO2-ethanol-water spent liquor from spruce for the production of chemicals by ABE fermentation
- Total mass balances of SO2-ethanol-water (SEW) fractionation of forest biomass
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 1. Results from direct analyses
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 2: Advanced methods for the detailed characterization of lignin oxidation mechanisms
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 3. Reaction pathways and modeling
- Simplified determination of total lignin content in kraft lignin samples and black liquors
- Xylan deposition onto eucalypt pulp fibers during oxygen delignification
- Dissolution of dissolving pulp in alkaline solvents after steam explosion pretreatments
- Structure and antioxidant activity of diarylheptanoids extracted from bark of grey alder (Alnus incana) and potential of biorefinery-based bark processing of European trees
- Short Note
- Binding affinities of different metal ions to unbleached hardwood kraft pulp
- Meetings
- Meetings
Artikel in diesem Heft
- Editorial
- EWLP 2010, 16th–19th August 2010, Hamburg, Germany
- Review
- Bio based fuels and fuel additives from lignocellulose feedstock via the production of levulinic acid and furfural
- Original Papers
- Optimization of steam pretreatment conditions for enzymatic hydrolysis of poplar wood
- Fungal pretreatment of pine wood to reduce the emission of volatile organic compounds
- Dilute acid pretreatment of starch-containing rice hulls for ethanol production
- Studies of the chemoenzymatic modification of cellulosic pulps by the laccase-TEMPO system
- Development of an integrated thermal and enzymatic hydrolysis for lignocellulosic biomass in fixed-bed reactors
- A larch based biorefinery: pre-extraction and extract fermentation to lactic acid
- Lignins as agents for bio-protection of wood
- Isolation and characterization of the phenolic fractions of wood pyrolytic oil
- Purification of Eucalyptus globulus water prehydrolyzates using the HiTAC process (high-temperature adsorption on activated charcoal)
- Disintegration and dissolution kinetics of wood chips in ionic liquids
- Ionic liquids as media for biomass processing: opportunities and restrictions
- Autohydrolysis of birch wood
- Solvent extraction as a means of preparing homogeneous lignin fractions
- Conditioning of SO2-ethanol-water spent liquor from spruce for the production of chemicals by ABE fermentation
- Total mass balances of SO2-ethanol-water (SEW) fractionation of forest biomass
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 1. Results from direct analyses
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 2: Advanced methods for the detailed characterization of lignin oxidation mechanisms
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 3. Reaction pathways and modeling
- Simplified determination of total lignin content in kraft lignin samples and black liquors
- Xylan deposition onto eucalypt pulp fibers during oxygen delignification
- Dissolution of dissolving pulp in alkaline solvents after steam explosion pretreatments
- Structure and antioxidant activity of diarylheptanoids extracted from bark of grey alder (Alnus incana) and potential of biorefinery-based bark processing of European trees
- Short Note
- Binding affinities of different metal ions to unbleached hardwood kraft pulp
- Meetings
- Meetings