Article
Licensed
Unlicensed
Requires Authentication
Solvent extraction as a means of preparing homogeneous lignin fractions
11th EWLP, Hamburg, Germany, August 16–19, 2010
-
Jarmo Ropponen
,
Lea Räsänen
Published/Copyright:
June 10, 2011
Abstract
Sequential extraction method was applied to lignins from hardwood and softwood isolated by kraft and VTT organosolv processes. Solvent extraction was found to fractionate lignin according to the molecular weight: small molecular weight lignin is dissolved in the organic solvents and the lignin with higher molecular weight is enriched into the residue. Isolated acetone fractions of lignin are more homogeneous with narrow molecular weight distributions. Based on the 31P NMR results, both total hydroxyl content and the content of phenolic hydroxyl units are higher in the acetone fraction than in the residue. Pyrolysis-GC/MS of all lignins showed that p-hydroxy phenols are enriched to the residues. Preferential dissolution of syringyl type lignin in acetone was observed for hardwood kraft lignin, whereas the opposite behavior was seen for the hardwood organosolv lignin. Glass transition temperatures of all acetone soluble fractions were notably low compared to starting and residue lignins, which gives possibilities for future applications as a material with specific properties.
Keywords: DSC; molecular weight distribution; pyrolysis-GC/MS; sequential solvent extraction; size-exclusion chromatography (SEC); thermal behavior; 31P-NMR spectroscopy
Received: 2010-10-29
Accepted: 2011-4-4
Published Online: 2011-06-10
Published in Print: 2011-06-01
©2011 by Walter de Gruyter Berlin Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Editorial
- EWLP 2010, 16th–19th August 2010, Hamburg, Germany
- Review
- Bio based fuels and fuel additives from lignocellulose feedstock via the production of levulinic acid and furfural
- Original Papers
- Optimization of steam pretreatment conditions for enzymatic hydrolysis of poplar wood
- Fungal pretreatment of pine wood to reduce the emission of volatile organic compounds
- Dilute acid pretreatment of starch-containing rice hulls for ethanol production
- Studies of the chemoenzymatic modification of cellulosic pulps by the laccase-TEMPO system
- Development of an integrated thermal and enzymatic hydrolysis for lignocellulosic biomass in fixed-bed reactors
- A larch based biorefinery: pre-extraction and extract fermentation to lactic acid
- Lignins as agents for bio-protection of wood
- Isolation and characterization of the phenolic fractions of wood pyrolytic oil
- Purification of Eucalyptus globulus water prehydrolyzates using the HiTAC process (high-temperature adsorption on activated charcoal)
- Disintegration and dissolution kinetics of wood chips in ionic liquids
- Ionic liquids as media for biomass processing: opportunities and restrictions
- Autohydrolysis of birch wood
- Solvent extraction as a means of preparing homogeneous lignin fractions
- Conditioning of SO2-ethanol-water spent liquor from spruce for the production of chemicals by ABE fermentation
- Total mass balances of SO2-ethanol-water (SEW) fractionation of forest biomass
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 1. Results from direct analyses
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 2: Advanced methods for the detailed characterization of lignin oxidation mechanisms
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 3. Reaction pathways and modeling
- Simplified determination of total lignin content in kraft lignin samples and black liquors
- Xylan deposition onto eucalypt pulp fibers during oxygen delignification
- Dissolution of dissolving pulp in alkaline solvents after steam explosion pretreatments
- Structure and antioxidant activity of diarylheptanoids extracted from bark of grey alder (Alnus incana) and potential of biorefinery-based bark processing of European trees
- Short Note
- Binding affinities of different metal ions to unbleached hardwood kraft pulp
- Meetings
- Meetings
Keywords for this article
DSC;
molecular weight distribution;
pyrolysis-GC/MS;
sequential solvent extraction;
size-exclusion chromatography (SEC);
thermal behavior;
31P-NMR spectroscopy
Articles in the same Issue
- Editorial
- EWLP 2010, 16th–19th August 2010, Hamburg, Germany
- Review
- Bio based fuels and fuel additives from lignocellulose feedstock via the production of levulinic acid and furfural
- Original Papers
- Optimization of steam pretreatment conditions for enzymatic hydrolysis of poplar wood
- Fungal pretreatment of pine wood to reduce the emission of volatile organic compounds
- Dilute acid pretreatment of starch-containing rice hulls for ethanol production
- Studies of the chemoenzymatic modification of cellulosic pulps by the laccase-TEMPO system
- Development of an integrated thermal and enzymatic hydrolysis for lignocellulosic biomass in fixed-bed reactors
- A larch based biorefinery: pre-extraction and extract fermentation to lactic acid
- Lignins as agents for bio-protection of wood
- Isolation and characterization of the phenolic fractions of wood pyrolytic oil
- Purification of Eucalyptus globulus water prehydrolyzates using the HiTAC process (high-temperature adsorption on activated charcoal)
- Disintegration and dissolution kinetics of wood chips in ionic liquids
- Ionic liquids as media for biomass processing: opportunities and restrictions
- Autohydrolysis of birch wood
- Solvent extraction as a means of preparing homogeneous lignin fractions
- Conditioning of SO2-ethanol-water spent liquor from spruce for the production of chemicals by ABE fermentation
- Total mass balances of SO2-ethanol-water (SEW) fractionation of forest biomass
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 1. Results from direct analyses
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 2: Advanced methods for the detailed characterization of lignin oxidation mechanisms
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 3. Reaction pathways and modeling
- Simplified determination of total lignin content in kraft lignin samples and black liquors
- Xylan deposition onto eucalypt pulp fibers during oxygen delignification
- Dissolution of dissolving pulp in alkaline solvents after steam explosion pretreatments
- Structure and antioxidant activity of diarylheptanoids extracted from bark of grey alder (Alnus incana) and potential of biorefinery-based bark processing of European trees
- Short Note
- Binding affinities of different metal ions to unbleached hardwood kraft pulp
- Meetings
- Meetings
