Article
Licensed
Unlicensed
Requires Authentication
Total mass balances of SO2-ethanol-water (SEW) fractionation of forest biomass
11th EWLP, Hamburg, Germany, August 16–19, 2010
-
Minna Yamamoto
,
Mikhail Iakovlev
Published/Copyright:
June 10, 2011
Abstract
The overall target of this project, called Bioforest, is to develop an economic process for the production of commodity chemicals from mixed forest biomass, consisting of logging residues of hardwoods (HW) and softwoods (SW) and also from recycled fibers. The aim is to dissolve the biomass lignin and to produce monosugars based on hemicelluloses and hydrolyzed cellulose in high yield. The hydrolyzate could subsequently be converted into chemicals by modified acetone-butanol-ethanol fermentation. Here, the total mass balances of SO2-ethanol-water fractionation of different types of biomass feedstocks, such as SW and HW biomass, and deinked pulp are presented. Chemical composition of the feedstocks, solid residues (pulps) and spent liquors of fractionation were analyzed to gain more understanding about the fractionation procedure. The analysis was focused on carbohydrates, lignin, ash, acetyl groups and sugar degradation products. It was also examined if all feedstocks could be treated simultaneously in one digester because a larger feedstock supply within an economic transport radius improves the viability of the process. The fractionation approach was successful and it can be concluded that the method presented is very versatile for future applications in lignocellulosic biorefineries.
Keywords: biorefinery; forest biomass; organosolv pulping; SO2-ethanol-water (SEW) pulping; versatile fractionation of biomass
Received: 2010-11-29
Accepted: 2011-5-3
Published Online: 2011-06-10
Published in Print: 2011-06-01
©2011 by Walter de Gruyter Berlin Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Editorial
- EWLP 2010, 16th–19th August 2010, Hamburg, Germany
- Review
- Bio based fuels and fuel additives from lignocellulose feedstock via the production of levulinic acid and furfural
- Original Papers
- Optimization of steam pretreatment conditions for enzymatic hydrolysis of poplar wood
- Fungal pretreatment of pine wood to reduce the emission of volatile organic compounds
- Dilute acid pretreatment of starch-containing rice hulls for ethanol production
- Studies of the chemoenzymatic modification of cellulosic pulps by the laccase-TEMPO system
- Development of an integrated thermal and enzymatic hydrolysis for lignocellulosic biomass in fixed-bed reactors
- A larch based biorefinery: pre-extraction and extract fermentation to lactic acid
- Lignins as agents for bio-protection of wood
- Isolation and characterization of the phenolic fractions of wood pyrolytic oil
- Purification of Eucalyptus globulus water prehydrolyzates using the HiTAC process (high-temperature adsorption on activated charcoal)
- Disintegration and dissolution kinetics of wood chips in ionic liquids
- Ionic liquids as media for biomass processing: opportunities and restrictions
- Autohydrolysis of birch wood
- Solvent extraction as a means of preparing homogeneous lignin fractions
- Conditioning of SO2-ethanol-water spent liquor from spruce for the production of chemicals by ABE fermentation
- Total mass balances of SO2-ethanol-water (SEW) fractionation of forest biomass
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 1. Results from direct analyses
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 2: Advanced methods for the detailed characterization of lignin oxidation mechanisms
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 3. Reaction pathways and modeling
- Simplified determination of total lignin content in kraft lignin samples and black liquors
- Xylan deposition onto eucalypt pulp fibers during oxygen delignification
- Dissolution of dissolving pulp in alkaline solvents after steam explosion pretreatments
- Structure and antioxidant activity of diarylheptanoids extracted from bark of grey alder (Alnus incana) and potential of biorefinery-based bark processing of European trees
- Short Note
- Binding affinities of different metal ions to unbleached hardwood kraft pulp
- Meetings
- Meetings
Keywords for this article
biorefinery;
forest biomass;
organosolv pulping;
SO2-ethanol-water (SEW) pulping;
versatile fractionation of biomass
Articles in the same Issue
- Editorial
- EWLP 2010, 16th–19th August 2010, Hamburg, Germany
- Review
- Bio based fuels and fuel additives from lignocellulose feedstock via the production of levulinic acid and furfural
- Original Papers
- Optimization of steam pretreatment conditions for enzymatic hydrolysis of poplar wood
- Fungal pretreatment of pine wood to reduce the emission of volatile organic compounds
- Dilute acid pretreatment of starch-containing rice hulls for ethanol production
- Studies of the chemoenzymatic modification of cellulosic pulps by the laccase-TEMPO system
- Development of an integrated thermal and enzymatic hydrolysis for lignocellulosic biomass in fixed-bed reactors
- A larch based biorefinery: pre-extraction and extract fermentation to lactic acid
- Lignins as agents for bio-protection of wood
- Isolation and characterization of the phenolic fractions of wood pyrolytic oil
- Purification of Eucalyptus globulus water prehydrolyzates using the HiTAC process (high-temperature adsorption on activated charcoal)
- Disintegration and dissolution kinetics of wood chips in ionic liquids
- Ionic liquids as media for biomass processing: opportunities and restrictions
- Autohydrolysis of birch wood
- Solvent extraction as a means of preparing homogeneous lignin fractions
- Conditioning of SO2-ethanol-water spent liquor from spruce for the production of chemicals by ABE fermentation
- Total mass balances of SO2-ethanol-water (SEW) fractionation of forest biomass
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 1. Results from direct analyses
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 2: Advanced methods for the detailed characterization of lignin oxidation mechanisms
- Lignin oxidation mechanisms under oxygen delignification conditions. Part 3. Reaction pathways and modeling
- Simplified determination of total lignin content in kraft lignin samples and black liquors
- Xylan deposition onto eucalypt pulp fibers during oxygen delignification
- Dissolution of dissolving pulp in alkaline solvents after steam explosion pretreatments
- Structure and antioxidant activity of diarylheptanoids extracted from bark of grey alder (Alnus incana) and potential of biorefinery-based bark processing of European trees
- Short Note
- Binding affinities of different metal ions to unbleached hardwood kraft pulp
- Meetings
- Meetings
