Startseite Significant enhancement of bond strength in the roll bonding process using Pb particles
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Significant enhancement of bond strength in the roll bonding process using Pb particles

  • Mohammad Heydari Vini und Omid Hossein Zadeh
Veröffentlicht/Copyright: 18. Dezember 2017
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 109 Heft 1

Abstract

Composite materials and layered alloys have become an interesting topic in materials development. The roll bonding (RB) process as a solid phase method of bonding has been widely used in the manufacturing of layered strips. The poor bond strength is one of the major drawbacks of the RB process. In the present study, Pb particles were used to enhance the bond strength between aluminum strips as filler material. AA1050 particle-reinforced sheets with different contents of interlayer Pb particles were fabricated at various rolling temperatures and thickness reduction ratios. Effects of roll bonding parameters that create successful bonds such as amount of Pb particle content, plastic strain from rolling process and rolling temperature were investigated. The bond strength was evaluated by the peeling test. It was found that by increasing the rolling temperature, thickness reduction ratio and Pb content, successful bonds with higher strength were created. Scanning electron microscopy was utilized to characterize the peeled surface of AA1050/Pb samples.

Keywords: Roll bonding; Bond strength; Pb particles; Peeling test; Aluminum
*Correspondence address, Dr. Mohammad Heydari Vini, Assistant Professor, Department of Mechanical Engineering, Mobarakeh Branch, Islamic Azad University, Mobarakeh, Isfahan, Iran, Tel.: +98-31-52492103, E-mail:

References

[1] P.K.Wright, D.A.Snow, C.K.Tay: Met. Technol.5 (1978) 24. 10.1179/mt.1978.5.1.24Suche in Google Scholar

[2] K.Wu, H.Chang, E.Maawad, W.M.Gan, H.G.Brokmeier, M.Y.Zheng: Mater. Sci. Eng. A527 (2010) 3073. 10.1016/j.msea.2010.02.001Suche in Google Scholar

[3] F.Kümmel, M. Kreuz,; T.Hausöl, H.W.Höppel, M.Göken: Metals6 (2016) 1. 10.3390/met6030056Suche in Google Scholar

[4] M.Slámová, P.Sláma, P.Homola, J.Uhlíř, M.Cieslar: Int. J. Mater. Res.100 (2009) 858. 10.3139/146.110106Suche in Google Scholar

[5] YB.Asl, M.Meratian, A.Emamikhah: Proc. Inst. Mech. Eng. Part. B J. Eng. Manuf.229 (2015) 1302. 10.1177/0954405414535921Suche in Google Scholar

[6] M.Alizadeh: J. Mater. Sci.47 (2012) 4689. 10.1007/s10853-012-6337-ySuche in Google Scholar

[7] O.Emadinia, S.Simões, F.Viana: Weld. World60 (2016) 337. 10.1007/s40194-015-0282-8Suche in Google Scholar

[8] V.Jindal, V.C.Srivastava, R. NGhosh: Mater. Sci. Technol.24 (2008) 798. 10.1179/174328406X148688Suche in Google Scholar

[9] M.Reihanian, F.K.Hadadian, M.H.Paydar: Mater. Sci. Eng. A60 (2014) 188. 10.1016/j.msea.2014.04.013Suche in Google Scholar

[10] M.Abbasi, M.R.Toroghinejad: J. Mater. Process. Tech.210 (2010) 560. 10.1016/j.jmatprotec.2009.11.003Suche in Google Scholar

[11] N.Kamikawa, T.Furuhara: J. Mater. Process. Tech.213 (2013) 1412. 10.1016/j.jmatprotec.2013.02.016Suche in Google Scholar

[12] K.S.Suresh, S.Sinha, A.Chaudhary: Mater. Charact.70 (2012) 74. 10.1016/j.matchar.2012.04.017Suche in Google Scholar

[13] O.Emadinia1, S.Simões1, F.Viana1, M.F.Vieira, A.J.Cavaleiro, A.S.Ramos, M.T.Vieira: Weld. World60 (2016) 337. 10.1007/s40194-015-0282-8Suche in Google Scholar

[14] M.H.Vini, M.Sedighi, M.Mondali: J. Mater. Process. Res.108 (2017) 53. 10.3139/146.111450Suche in Google Scholar

[15] M.Eizadjou, H.D.Manesh, K.Janghorban: Mater. Des.30 (2009) 4156. 10.1016/j.matdes.2009.04.036Suche in Google Scholar

[16] M.Legros, G.Dehm, E.Arzt, T.J.Balk: Science319 (2008) 1646. PMid:18356520 10.1126/science.1151771Suche in Google Scholar PubMed

[17] S.Attar, M.Nagaral, H.NReddappa: Am. J. Mater. Sci.5 (3C) (2015) 53. 10.5923/c.materials.201502.11Suche in Google Scholar

[18] A.Salimi, E.Borhani, E.Emadoddin: Proc. Mater. Sci.11 (2015) 67. 10.1016/j.mspro.2015.11.094Suche in Google Scholar

[19] M.Sedighi, M.H.Vini, P.Farhadipour: Powder Metall. Met. Ceram.55 (2016) 413. 10.1007/s11106-016-9821-0Suche in Google Scholar

[20] M.Samadzadeh, M.R.Toroghinejad: J. Mater. Eng. Perform.23 (2014) 1887. 10.1007/s11665-014-0949-0Suche in Google Scholar

[21] V.Y.Mehr, M.R.Toroghinejad, A.Rezaeian: Mater. Des.53 (2014) 174. org/10.1016/j.matdes.2013.06.028Suche in Google Scholar

[22] R.Jamaati, M.R.Toroghinejad: Mater. Sci. Technol.27 (2011) 1101. 10.1179/026708310X12815992418256Suche in Google Scholar

[23] C.Wang, Y.Jiang, G.Xie: Mater. Sci. Eng. A652 (2016) 51. PMid:27287098 10.1016/j.matdes.2013.06.028Suche in Google Scholar

[24] A.Fattah-alhosseini, A.Naseri, M.H.Alemi: J. Manuf. Process.22 (2016) 120. 10.1016/j.jmapro.2016.03.006Suche in Google Scholar

Received: 2017-02-04
Accepted: 2017-08-08
Published Online: 2017-12-18
Published in Print: 2018-01-09

© 2018, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles
  5. Ternary Al–Mo–Y phase diagram and the new phase Al4Mo2Y
  6. Evaluation of the thixoformability of 318.1 aluminum alloy
  7. High temperature tensile behavior of Mg-2Al and Mg-6Al alloys
  8. Anisotropic thermomechanical behavior of AA6082 aluminum alloy Al–Mg–Si–Mn
  9. Significant enhancement of bond strength in the roll bonding process using Pb particles
  10. Nanoindentation characterization of Al-matrix nanocomposites produced via spark plasma sintering
  11. Study and development of NiAl intermetallic coating on hypo-eutectoid steel using highly activated composite granules of the Ni–Al system
  12. Elaboration of a triphasic calcium phosphate and silica nanocomposite for maxillary grafting and deposition on titanium implants
  13. Short Communications
  14. Microstructural effects of isothermal aging on a doped SAC solder alloy
  15. Two-stage synthesis of ultrafine powder of chromium carbide
  16. DGM News
  17. DGM News
https://doi.org/10.3139/146.111575
Schlagwörter für diesen Artikel
Roll bonding; Bond strength; Pb particles; Peeling test; Aluminum

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles
  5. Ternary Al–Mo–Y phase diagram and the new phase Al4Mo2Y
  6. Evaluation of the thixoformability of 318.1 aluminum alloy
  7. High temperature tensile behavior of Mg-2Al and Mg-6Al alloys
  8. Anisotropic thermomechanical behavior of AA6082 aluminum alloy Al–Mg–Si–Mn
  9. Significant enhancement of bond strength in the roll bonding process using Pb particles
  10. Nanoindentation characterization of Al-matrix nanocomposites produced via spark plasma sintering
  11. Study and development of NiAl intermetallic coating on hypo-eutectoid steel using highly activated composite granules of the Ni–Al system
  12. Elaboration of a triphasic calcium phosphate and silica nanocomposite for maxillary grafting and deposition on titanium implants
  13. Short Communications
  14. Microstructural effects of isothermal aging on a doped SAC solder alloy
  15. Two-stage synthesis of ultrafine powder of chromium carbide
  16. DGM News
  17. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 17.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111575/pdf
Button zum nach oben scrollen