Home Significant enhancement of bond strength in the roll bonding process using Pb particles
Article
Licensed
Unlicensed Requires Authentication

Significant enhancement of bond strength in the roll bonding process using Pb particles

  • Mohammad Heydari Vini and Omid Hossein Zadeh
Published/Copyright: December 18, 2017
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 109 Issue 1

Abstract

Composite materials and layered alloys have become an interesting topic in materials development. The roll bonding (RB) process as a solid phase method of bonding has been widely used in the manufacturing of layered strips. The poor bond strength is one of the major drawbacks of the RB process. In the present study, Pb particles were used to enhance the bond strength between aluminum strips as filler material. AA1050 particle-reinforced sheets with different contents of interlayer Pb particles were fabricated at various rolling temperatures and thickness reduction ratios. Effects of roll bonding parameters that create successful bonds such as amount of Pb particle content, plastic strain from rolling process and rolling temperature were investigated. The bond strength was evaluated by the peeling test. It was found that by increasing the rolling temperature, thickness reduction ratio and Pb content, successful bonds with higher strength were created. Scanning electron microscopy was utilized to characterize the peeled surface of AA1050/Pb samples.

Keywords: Roll bonding; Bond strength; Pb particles; Peeling test; Aluminum
*Correspondence address, Dr. Mohammad Heydari Vini, Assistant Professor, Department of Mechanical Engineering, Mobarakeh Branch, Islamic Azad University, Mobarakeh, Isfahan, Iran, Tel.: +98-31-52492103, E-mail:

References

[1] P.K.Wright, D.A.Snow, C.K.Tay: Met. Technol.5 (1978) 24. 10.1179/mt.1978.5.1.24Search in Google Scholar

[2] K.Wu, H.Chang, E.Maawad, W.M.Gan, H.G.Brokmeier, M.Y.Zheng: Mater. Sci. Eng. A527 (2010) 3073. 10.1016/j.msea.2010.02.001Search in Google Scholar

[3] F.Kümmel, M. Kreuz,; T.Hausöl, H.W.Höppel, M.Göken: Metals6 (2016) 1. 10.3390/met6030056Search in Google Scholar

[4] M.Slámová, P.Sláma, P.Homola, J.Uhlíř, M.Cieslar: Int. J. Mater. Res.100 (2009) 858. 10.3139/146.110106Search in Google Scholar

[5] YB.Asl, M.Meratian, A.Emamikhah: Proc. Inst. Mech. Eng. Part. B J. Eng. Manuf.229 (2015) 1302. 10.1177/0954405414535921Search in Google Scholar

[6] M.Alizadeh: J. Mater. Sci.47 (2012) 4689. 10.1007/s10853-012-6337-ySearch in Google Scholar

[7] O.Emadinia, S.Simões, F.Viana: Weld. World60 (2016) 337. 10.1007/s40194-015-0282-8Search in Google Scholar

[8] V.Jindal, V.C.Srivastava, R. NGhosh: Mater. Sci. Technol.24 (2008) 798. 10.1179/174328406X148688Search in Google Scholar

[9] M.Reihanian, F.K.Hadadian, M.H.Paydar: Mater. Sci. Eng. A60 (2014) 188. 10.1016/j.msea.2014.04.013Search in Google Scholar

[10] M.Abbasi, M.R.Toroghinejad: J. Mater. Process. Tech.210 (2010) 560. 10.1016/j.jmatprotec.2009.11.003Search in Google Scholar

[11] N.Kamikawa, T.Furuhara: J. Mater. Process. Tech.213 (2013) 1412. 10.1016/j.jmatprotec.2013.02.016Search in Google Scholar

[12] K.S.Suresh, S.Sinha, A.Chaudhary: Mater. Charact.70 (2012) 74. 10.1016/j.matchar.2012.04.017Search in Google Scholar

[13] O.Emadinia1, S.Simões1, F.Viana1, M.F.Vieira, A.J.Cavaleiro, A.S.Ramos, M.T.Vieira: Weld. World60 (2016) 337. 10.1007/s40194-015-0282-8Search in Google Scholar

[14] M.H.Vini, M.Sedighi, M.Mondali: J. Mater. Process. Res.108 (2017) 53. 10.3139/146.111450Search in Google Scholar

[15] M.Eizadjou, H.D.Manesh, K.Janghorban: Mater. Des.30 (2009) 4156. 10.1016/j.matdes.2009.04.036Search in Google Scholar

[16] M.Legros, G.Dehm, E.Arzt, T.J.Balk: Science319 (2008) 1646. PMid:18356520 10.1126/science.1151771Search in Google Scholar PubMed

[17] S.Attar, M.Nagaral, H.NReddappa: Am. J. Mater. Sci.5 (3C) (2015) 53. 10.5923/c.materials.201502.11Search in Google Scholar

[18] A.Salimi, E.Borhani, E.Emadoddin: Proc. Mater. Sci.11 (2015) 67. 10.1016/j.mspro.2015.11.094Search in Google Scholar

[19] M.Sedighi, M.H.Vini, P.Farhadipour: Powder Metall. Met. Ceram.55 (2016) 413. 10.1007/s11106-016-9821-0Search in Google Scholar

[20] M.Samadzadeh, M.R.Toroghinejad: J. Mater. Eng. Perform.23 (2014) 1887. 10.1007/s11665-014-0949-0Search in Google Scholar

[21] V.Y.Mehr, M.R.Toroghinejad, A.Rezaeian: Mater. Des.53 (2014) 174. org/10.1016/j.matdes.2013.06.028Search in Google Scholar

[22] R.Jamaati, M.R.Toroghinejad: Mater. Sci. Technol.27 (2011) 1101. 10.1179/026708310X12815992418256Search in Google Scholar

[23] C.Wang, Y.Jiang, G.Xie: Mater. Sci. Eng. A652 (2016) 51. PMid:27287098 10.1016/j.matdes.2013.06.028Search in Google Scholar

[24] A.Fattah-alhosseini, A.Naseri, M.H.Alemi: J. Manuf. Process.22 (2016) 120. 10.1016/j.jmapro.2016.03.006Search in Google Scholar

Received: 2017-02-04
Accepted: 2017-08-08
Published Online: 2017-12-18
Published in Print: 2018-01-09

© 2018, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles
  5. Ternary Al–Mo–Y phase diagram and the new phase Al4Mo2Y
  6. Evaluation of the thixoformability of 318.1 aluminum alloy
  7. High temperature tensile behavior of Mg-2Al and Mg-6Al alloys
  8. Anisotropic thermomechanical behavior of AA6082 aluminum alloy Al–Mg–Si–Mn
  9. Significant enhancement of bond strength in the roll bonding process using Pb particles
  10. Nanoindentation characterization of Al-matrix nanocomposites produced via spark plasma sintering
  11. Study and development of NiAl intermetallic coating on hypo-eutectoid steel using highly activated composite granules of the Ni–Al system
  12. Elaboration of a triphasic calcium phosphate and silica nanocomposite for maxillary grafting and deposition on titanium implants
  13. Short Communications
  14. Microstructural effects of isothermal aging on a doped SAC solder alloy
  15. Two-stage synthesis of ultrafine powder of chromium carbide
  16. DGM News
  17. DGM News
https://doi.org/10.3139/146.111575
Keywords for this article
Roll bonding; Bond strength; Pb particles; Peeling test; Aluminum

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles
  5. Ternary Al–Mo–Y phase diagram and the new phase Al4Mo2Y
  6. Evaluation of the thixoformability of 318.1 aluminum alloy
  7. High temperature tensile behavior of Mg-2Al and Mg-6Al alloys
  8. Anisotropic thermomechanical behavior of AA6082 aluminum alloy Al–Mg–Si–Mn
  9. Significant enhancement of bond strength in the roll bonding process using Pb particles
  10. Nanoindentation characterization of Al-matrix nanocomposites produced via spark plasma sintering
  11. Study and development of NiAl intermetallic coating on hypo-eutectoid steel using highly activated composite granules of the Ni–Al system
  12. Elaboration of a triphasic calcium phosphate and silica nanocomposite for maxillary grafting and deposition on titanium implants
  13. Short Communications
  14. Microstructural effects of isothermal aging on a doped SAC solder alloy
  15. Two-stage synthesis of ultrafine powder of chromium carbide
  16. DGM News
  17. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 17.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111575/pdf
Scroll to top button