Startseite Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy

  • Shuang Peng , Haibin Ji , Xin Feng , Jianke Qiu und Jiafeng Lei
Veröffentlicht/Copyright: 12. März 2015
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 106 Heft 3

Abstract

The effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy are investigated in this paper. The results showed that the microstructural evolution with temperature could be classified into three stages in terms of the variation in β matrix. At stage I (670–790°C), some acicular primary α phase was retained and coarsened in β matrix; at stage II (790–830°C), the acicular primary α phase almost completely dissolved and no secondary α phase formed in β matrix during the following air cooling, and stress-induced martensitic transformation during tensile testing at room temperature occurred which caused the “double yield” phenomenon; at stage III (830–910°C), the secondary α phase precipitated in β matrix during the cooling, which led to a significant increase in the tensile strength.

Keywords: Titanium alloy; Heat treatment; Microstructure; Tensile properties; Stress-induced martensitic transformation
* Correspondence address, Haibin Ji, Associate Researcher, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang, 110016, P.R. China, Tel.: +86-024-83978025, Fax: +86-024-23902021, E-mail:

References

[1] X.Huang, Z.S.Zhu, H.H.Wang: Advanced Aeronautical Titanium Alloys and Applications, National Defense Industry Press, Beijing (2012).Suche in Google Scholar

[2] R.R.Boyer: Mater. Sci. Eng. A213 (1996) 103. 10.1016/0921-5093(96)10233-1Suche in Google Scholar

[3] M.J.Donachie: Titanium – A Technical guide, ASM International, Ohio (2000).10.31399/asm.tb.ttg2.9781627082693Suche in Google Scholar

[4] G.Lütjering, J.C.Williams: Titanium, Springer, Berlin (2003). 10.1007/978-3-540-71398-2Suche in Google Scholar

[5] D.Banerjee, J.C.Williams: Acta Mater.61 (2013) 844. 10.1016/j.actamat.2012.10.043Suche in Google Scholar

[6] E.A.Borisova, S.Q.Chen: Metallography of Titanium Alloys, National Defense Industry Press, Beijing (1986).Suche in Google Scholar

[7] I.Weiss, S.L.Semiatin: Mater. Sci. Eng. A243 (1998) 46. 10.1016/S0921-5093(97)00783-1Suche in Google Scholar

[8] Q.Q.Ma, W.W.Zheng, X.W.Li: Mater. Eng.308 (2009) 19.Suche in Google Scholar

[9] A.G.Paradkar, S.V.Kamat, A.K.Gogia, B.P.Kashyap: Mater. Sci. Eng. A456 (2007) 292. 10.1016/j.msea.2006.11.156Suche in Google Scholar

[10] T.W.Duerig, J.Albrecht, D.Richter, P.Fischer: Acta Mater.30 (1982) 2161. 10.1016/0001-6160(82)90137-7Suche in Google Scholar

[11] T.W.Duerig, G.T.Terlinde, J.C.Williams: Metall. Trans. A11 (1980) 1987. 10.1007/BF02655118Suche in Google Scholar

[12] T.Grosdidier, M.J.Philippe: Mater. Sci. Eng. A291 (2000) 218. 10.1016/S0921-5093(00)00921-7Suche in Google Scholar

[13] Z.Q.Zhang, L.M.Dong, Y.Yang, S.X.Guan, Y.Y.Liu, R.Yang: Acta Metall. Sin.47 (2011) 1257.Suche in Google Scholar

[14] F.D.Fischer, G.Reisner, E.Werner, K.Tanaka, G.Cailletaud, T.Antretter: Int. J. Plast.16 (2000) 723. 10.1016/S0749-6419(99)00078-9Suche in Google Scholar

[15] D.He, J.Zhu, S.Zaefferer, D.Raabe: Mater. Design56 (2014) 937. 10.1016/j.matdes.2013.10.080Suche in Google Scholar

Received: 2014-08-15
Accepted: 2014-11-04
Published Online: 2015-03-12
Published in Print: 2015-03-11

© 2015, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
  5. X-ray stress measurement from an imperfect Debye–Scherrer ring
  6. Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
  7. Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
  8. Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
  9. Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
  10. Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
  11. Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
  12. Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
  13. Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
  14. Production of bioactive glass-derived scaffolds using citric acid porogen
  15. Short Communications
  16. Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
  17. Fast microwave synthesis and characterization of MgTi2O5
  18. Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
  19. Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
  20. People
  21. In Memoriam Volker Schumacher
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.111184
Schlagwörter für diesen Artikel
Titanium alloy; Heat treatment; Microstructure; Tensile properties; Stress-induced martensitic transformation

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
  5. X-ray stress measurement from an imperfect Debye–Scherrer ring
  6. Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
  7. Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
  8. Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
  9. Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
  10. Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
  11. Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
  12. Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
  13. Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
  14. Production of bioactive glass-derived scaffolds using citric acid porogen
  15. Short Communications
  16. Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
  17. Fast microwave synthesis and characterization of MgTi2O5
  18. Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
  19. Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
  20. People
  21. In Memoriam Volker Schumacher
  22. DGM News
  23. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 9.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111184/html
Button zum nach oben scrollen