Home Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
Article
Licensed
Unlicensed Requires Authentication

Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis

  • Carmen Schäfer , Henk-Jan Brinkman , Olaf Engler and Gernot Nitzsche
Published/Copyright: March 12, 2015
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 106 Issue 3

Abstract

The present study introduces a new method to characterise and evaluate the roping behaviour of aluminium sheet alloys of the AA 6xxx series for car body applications. The new approach combines two known methods into a novel powerful tool, (i) the measurement of a 3D surface topography with a white-light interferometer and (ii) the subsequent data analysis by means of Fourier analysis. Use of the white-light interferometer allows analysing roping of deformed samples without the need of additional surface preparation steps, e.g. inking, stoning, etc., which may falsify the surface appearance. The use of data analysis by means of fast Fourier transform allows differentiating between different surface phenomena, e.g. unidirectional component versus isotropic components. It was found that the new approach is capable of giving reliable and reproducible data, which qualifies this method to study roping in aluminium car body sheets in an objective manner.

Keywords: Roping; Fourier analysis; White-light interferometry; Aluminium sheet alloys
* Correspondence address, Prof. Dr. Olaf Engler, Georg-von Boeselagerstr. 21, 53117 Bonn, Germany, Tel.: +49-02285522792, E-mail:

References

[1] G.B.Burger, A.K.Gupta, P.W.Jeffrey, D.J.Lloyd: Mater. Charact.35 (1995) 23–39. 10.1016/1044-5803(95)00065-8Search in Google Scholar

[2] J.Hirsch: Aluminium85 (2009) 9, 28–33.10.1111/j.1744-6163.1997.tb00538.xSearch in Google Scholar

[3] W.S.Miller, L.Zhuang, J.Bottema, A.J.Wittebrood, P.De Smet, A.Haszler, A.Vieregge: Mater. Sci. Eng. A280 (2000) 37–49. 10.1016/S0921-5093(99)00653-XSearch in Google Scholar

[4] H.J.Brinkman, O.Engler, J.Hirsch, D.Schröder: Aluminium Int. Today16 (2011) 1/2, 41–43.Search in Google Scholar

[5] A.J.Beaudoin, J.D.Bryant, D.A.Korzekwa: Metall. Mater. Trans. A29 (1998) 2323–2331. 10.1007/s11661-998-0109-ySearch in Google Scholar

[6] G.J.Baczynski, R.Guzzo, M.D.Ball, D.J.Lloyd: Acta Mater.48 (2000) 3361–3376. 10.1016/S1359-6454(00)00141-5Search in Google Scholar

[7] O.Engler, E.Brünger: Mater. Sci. Forum396-402 (2002) 345–350.10.4028/www.scientific.net/MSF.396-402.345Search in Google Scholar

[8] O.Engler, J.Hirsch: Mater. Sci. Eng. A336 (2002) 249–262. 10.1016/S0921-5093(01)01968-2Search in Google Scholar

[9] P.D.Wu, D.J.Lloyd, A.Bosland, H.Jin, S.R.MacEwen: Acta Mater.51 (2003) 1945–1957. 10.1016/S1359-6454(02)00387-7Search in Google Scholar

[10] T.A.Bennett, R.H.Petrov, L.A.I.Kestens: Scr. Mater.61 (2009) 733–736. 10.1016/j.scriptamat.2009.06.016Search in Google Scholar

[11] D.Raabe, M.Sachtleber, H.Weiland, G.Scheele, Z.Zhao: Acta Mater.51 (2003) 1539–1560. 10.1016/S1359-6454(02)00557-8Search in Google Scholar

[12] O.Engler, C.Schäfer, H.J.Brinkman: Acta Mater.60 (2012) 5217–5232. 10.1016/j.actamat.2012.06.039Search in Google Scholar

[13] A.W.F.Smith, S.A.Court, F.J.Humphreys, in: G.Gottstein, D.A.Molodov (Eds.), Proc. 1st Joint Int. Conf. on Recrystallisation and Grain Growth, Springer, Berlin (2001) 1323–1328.Search in Google Scholar

[14] T.A.Bennett, J.Sidor, R.H.Petrov, L.A.I.Kestens: Adv. Eng. Mater.12 (2010) 1018–1023. 10.1002/adem.201000072Search in Google Scholar

[15] K.J.Lee, K.D.Woo: Met. Mater. Int.17 (2011) 689–695. 10.1007/s12540-011-0202-4Search in Google Scholar

[16] W.Hotz, R.Müller, J.Timm, in: M.Borsutzki, S.Geisler (Eds.), Tagungsband Werkstoffprüfung, Fortschritte der Kennwertermittlung für Forschung und Praxis, Stahleisen Verlag, Düsseldorf (2009) 365–370.Search in Google Scholar

[17] A.Guillotin, G.Guiglionda, C.Maurice, J.H.Driver: Mater. Charact.61 (2010) 1119–1125. 10.1016/j.matchar.2010.07.005Search in Google Scholar

[18] S.Kusters, M.Seefeldt, P.Van Houtte: Mater. Sci. Eng. A527 (2010) 6239–6243. 10.1016/j.msea.2010.06.011Search in Google Scholar

[19] A.Guillotin, G.Guiglionda, C.Maurice, J.H.Driver: Metall. Mater. Trans. A42 (2011) 1919–1924. 10.1007/s11661-010-0601-zSearch in Google Scholar

[20] R.Denninger, M.Liewald, M.Sindel, in: Proc. VI Aluminium Surface Science & Technology, Sorrento, Italy (2012).Search in Google Scholar

[21] C.Schäfer, H.J.Brinkman, O.Engler: in preparation.Search in Google Scholar

Received: 2014-08-04
Accepted: 2014-10-22
Published Online: 2015-03-12
Published in Print: 2015-03-11

© 2015, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
  5. X-ray stress measurement from an imperfect Debye–Scherrer ring
  6. Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
  7. Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
  8. Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
  9. Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
  10. Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
  11. Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
  12. Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
  13. Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
  14. Production of bioactive glass-derived scaffolds using citric acid porogen
  15. Short Communications
  16. Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
  17. Fast microwave synthesis and characterization of MgTi2O5
  18. Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
  19. Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
  20. People
  21. In Memoriam Volker Schumacher
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.111173
Keywords for this article
Roping; Fourier analysis; White-light interferometry; Aluminium sheet alloys

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
  5. X-ray stress measurement from an imperfect Debye–Scherrer ring
  6. Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
  7. Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
  8. Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
  9. Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
  10. Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
  11. Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
  12. Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
  13. Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
  14. Production of bioactive glass-derived scaffolds using citric acid porogen
  15. Short Communications
  16. Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
  17. Fast microwave synthesis and characterization of MgTi2O5
  18. Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
  19. Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
  20. People
  21. In Memoriam Volker Schumacher
  22. DGM News
  23. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 6.9.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111173/html
Scroll to top button