Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
-
Arash Fattah-alhosseini
Abstract
The role of chloride in the electrochemical behaviour of AZ31B Mg alloy in 0.05 M NaOH was investigated by means of potentiodynamic polarization, Mott–Schottky analysis, electrochemical impedance spectroscopy and scanning electron microscopy. Potentiodynamic polarization curves indicated that chloride concentration increase leads to a narrower passivation region of AZ31B Mg alloy. Also, the polarization curves revealed that increasing chloride concentration leads to higher corrosion current density in AZ31B Mg alloy. The micrographs clearly showed that the number and depth of pits increased with increasing chloride concentration. The Mott–Schottky analysis showed that the passive films have n-type semiconductive characteristics, where the number of oxygen vacancies and interstitials predominate over the cation vacancies. Moreover, Mott–Schottky results showed that the donor densities are in the range of 1021 cm−3 and increase with increasing chloride concentration.
References
[1] Y.-I.Choi, S.Salman, K.Kuroda, M.Okido: Corros. Sci.63 (2012) 5. 10.1016/j.corsci.2012.02.010Suche in Google Scholar
[2] P.D.Beggs, W.Song, M.Easton: Int. J. Mech. Sci.52 (2010) 1634. 10.1016/j.ijmecsci.2010.08.005Suche in Google Scholar
[3] A.F.Galio, S.V.Lamaka, M.L.Zheludkevich, L.F.P.Dick, I.L.Müller, M.G.S.Ferreira: Surf. Coat. Technol.204 (2010) 1479. 10.1016/j.surfcoat.2009.09.067Suche in Google Scholar
[4] R.Zhu, J.Zhang, C.Chang, S.Gao, N.Ni: J. Magnesium Alloys1(2013) 235. 10.1016/j.jma.2013.08.001Suche in Google Scholar
[5] B.Salami, A.Afshar, A.Mazaheri: J. Magnesium Alloys2 (2014) 72. 10.1016/j.jma.2014.02.002Suche in Google Scholar
[6] M.Pourbaix: Atlas of Electrochemical Equilibria in Aqueous Solutions, 2nd Ed., NACE, Houston (1974).Suche in Google Scholar
[7] M.Carboneras, M.D.Lopez, P.Rodrigo, M.Campo, B.Torres, E.Otero: Corros. Sci.52 (2010) 761. 10.1016/j.corsci.2009.10.040Suche in Google Scholar
[8] Y.Mizutani, S.J.Kim, R.Ichino, M.Okido: Surf. Coat. Technol.169 (2003) 143. 10.1016/S0257-8972(03)00214-7Suche in Google Scholar
[9] Y.F.Jiang, L.F.Liu, C.Q.Zhai, Y.P.Zhu, W.J.Ding: Thin Solid Films484 (2005) 232. 10.1016/j.tsf.2005.02.037Suche in Google Scholar
[10] H.Duan, C.Yan, F.Wang: Electrochim. Acta52 (2007) 3785. 10.1016/j.electacta.2006.10.066Suche in Google Scholar
[11] J.Chen, J.Q.Wang, E.H.Han, J.H.Dong, W.Ke: Corros. Sci.50 (2008) 1292. 10.1016/j.corsci.2007.06.005Suche in Google Scholar
[12] Y.Li, T.Zhang, F.H.Wang: Electrochim. Acta51 (2006) 2845. 10.1016/j.electacta.2005.06.031Suche in Google Scholar
[13] T.Zhang, Y.Shao, G.Meng, Y.Li, F.Wang: Electrochim. Acta52 (2006) 1323. 10.1016/j.electacta.2006.02.058Suche in Google Scholar
[14] T.Zhang, Y.Li, F.Wang: Corros. Sci.48 (2006) 1249. 10.1016/j.corsci.2005.01.012Suche in Google Scholar
[15] S.J.Xia, R.Yue, R.G.RateickJr., V.I.Briss: J. Electrochem. Soc.151 (2004) B179. 10.1149/1.1646139Suche in Google Scholar
[16] M.C.L.de Oliveira, V.S.M.Pereira, O.V.Correa, N.B.de Lima, R.A.Antunes: Corros. Sci.69 (2013) 311. 10.1016/j.corsci.2012.12.015Suche in Google Scholar
[17] T.Ishizaki, Y.Masuda, K.Teshima: Surf. Coat. Technol.217 (2013) 76. 10.1016/j.surfcoat.2012.11.076Suche in Google Scholar
[18] F.E.T.Heakal, A.M.Fekry, M.A.E.B.Jibril: Corros. Sci.53 (2011) 1174. 10.1016/j.corsci.2010.11.040Suche in Google Scholar
[19] L.J.Zhang, J.J.Fan, Z.Zhang, F.H.Cao, J.Q.Zhang, C.N.Cao: Electrochim. Acta52 (2007) 5325. 10.1016/j.electacta.2006.09.051Suche in Google Scholar
[20] D.D.Macdonald: J. Nuclear Mater.379 (2008) 24. 10.1016/j.jnucmat.2008.06.002Suche in Google Scholar
[21] D.D.Macdonald, M.Urquidi-Macdonald: J. Electrochem. Soc.137 (1990) 2395. 10.1149/1.2086490Suche in Google Scholar
[22] D.D.Macdonald: J. Electrochem. Soc.153 (2006) B213. 10.1149/1.2168378Suche in Google Scholar
[23] N.D.Nam, M.Z.Bian, M.Forsyth, M.Seter, M.Tan, K.S.Shin: Corros. Sci.64 (2012) 263. 10.1016/j.corsci.2012.07.026Suche in Google Scholar
[24] U.Retter, A.Widmann, K.Siegler, H.Kahlert: J. Electroanal. Chem.546 (2003) 87. 10.1016/S0022-0728(03)00150-5Suche in Google Scholar
[25] V.D.Jovic, B.M.Jovic: Corros. Sci.50 (2008) 3063. 10.1016/j.corsci.2008.08.007Suche in Google Scholar
© 2015, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
- X-ray stress measurement from an imperfect Debye–Scherrer ring
- Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
- Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
- Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
- Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
- Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
- Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
- Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
- Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
- Production of bioactive glass-derived scaffolds using citric acid porogen
- Short Communications
- Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
- Fast microwave synthesis and characterization of MgTi2O5
- Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
- Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
- People
- In Memoriam Volker Schumacher
- DGM News
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
- X-ray stress measurement from an imperfect Debye–Scherrer ring
- Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
- Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
- Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
- Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
- Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
- Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
- Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
- Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
- Production of bioactive glass-derived scaffolds using citric acid porogen
- Short Communications
- Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
- Fast microwave synthesis and characterization of MgTi2O5
- Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
- Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
- People
- In Memoriam Volker Schumacher
- DGM News
- DGM News