Startseite Mineral-filled biopolyester coatings for paperboard packaging materials: barrier, sealability, convertability and biodegradability properties
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Mineral-filled biopolyester coatings for paperboard packaging materials: barrier, sealability, convertability and biodegradability properties

  • Karoliina Helanto ORCID logo EMAIL logo , Riku Talja und Orlando J. Rojas
Veröffentlicht/Copyright: 28. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Nordic Pulp & Paper Research Journal
Aus der Zeitschrift Nordic Pulp & Paper Research Journal Band 37 Heft 1

Abstract

Changing trends in packaging materials has been driven by increasing environmental awareness as well as legislation. In this context, paperboard-based packaging have become increasingly popular due to its bio-based origin, potential biodegradability and physical properties. However, conventional systems lack behind in barrier performance and heat sealability. Hence, the addition of functional layers have been considered as alternative solutions to this challenge. Here we propose a biodegradable PLA-based polymer coating filled with minerals (0–10 wt% loading), namely, talc, kaolin and calcium carbonate, all of which were used in surface application on uncoated folding box board. For this purpose, we used a pilot-scale extrusion unit that produced materials that were tested for key properties. We found that the presence of filler in the PLA layer improved both water vapor (up to 16 %) and oxygen (up to 56 %) barrier properties. Moreover, the main effect of the fillers was observed in heat sealability, which was improved via adhesion at low temperatures, resulting in full fiber tear. Cup forming was less effected by filler loading in the PLA coating while repulping tests indicated the presence of large flakes of the polymer coating in 1 %-consistency slurries. Finally, biodegradability was slightly delayed in filler-containing samples (biodegradation within 10–60 days), most likely due to the nucleating effect of the fillers. Nevertheless, all the samples can be classified as biodegradable. Overall, our results represent a step forward in scale-up adoption of PLA-based coatings most useful in the development of packaging materials.

Keywords: biopolymer; coating; converting; filler; packaging

Funding statement: The authors state no funding involved.

Acknowledgments

The authors wish to thank Arctic Biomaterials Oy for the compounding of the masterbatches. Metsä Board research laboratory technicians are also acknowledged for assistance in laboratory analyses along the research group of Paper Converting and Packaging Technology at Tampere University, for the extrusion coating trial, OTR analysis and hot air sealing tests. Finally, Kruunukartonki – Länsipahvi Oy is thanked for assistance with the cup forming trials, and Itene for the biodegradability tests.

  1. Conflict of interest: The authors declare no conflicts of interest.

References

Abhijit, B. (2015) Biopolymer Based Paper Coatings Towards Sustainable Packaging. Q. J. Indian Pulp Paper Tech. Assoc. 27(2):63–70.Suche in Google Scholar

Ai, X., Li, X., Yu, Y., Pan, H., Yang, J., Wang, D., Yang, H., Zhang, H., Dong, L. (2019) The Mechanical, Thermal, Rheological and Morphological Properties of PLA/PBAT Blown Films by Using Bis(tert-butyl dioxy isopropyl) Benzene as Crosslinking Agent. Polym. Eng. Sci. 59:E227–E236.10.1002/pen.24927Suche in Google Scholar

Aliotta, L., Cinelli, P., Coltelli, M.B., Lazzeri, A. (2019) Rigid filler toughening in PLA-Calcium Carbonate composites: Effect of particle surface treatment and matrix plasticization. Eur. Polym. J. 113:78–88.10.1016/j.eurpolymj.2018.12.042Suche in Google Scholar

Amirabadi, S., Rodrigue, D., Duchesne, C. (2018) Characterization of PLA-talc films using NIR chemical imaging and Multivariate Image Analysis techniques. Polym. Test. 68:61–69.10.1016/j.polymertesting.2018.03.047Suche in Google Scholar

Andersson, C. (2008) New ways to enhance the functionality of paperboard by surface treatment–a review. Packag. Technol. Sci. 21(6):339–373.10.1002/pts.823Suche in Google Scholar

Auras, R., Harte, B., Selke, S. (2004) An overview of polylactides as packaging materials. Macromol. Biosci. 4(9):835–864.10.1002/mabi.200400043Suche in Google Scholar PubMed

Buzarovska, A., Bogoeva-Gaceva, G., Fajgar, R. (2016) Effect of the talc filler on structural, water vapor barrier and mechanical properties of poly (lactic acid) composites. J. Polym. Eng. 36(2):181–188.10.1515/polyeng-2015-0014Suche in Google Scholar

Cameron, G. (2020) Future of Packaging: Long-term Strategic Forecasts to 2030. Smithers. https://www.smithers.com/services/market-reports/packaging/future-packaging-long-term-strategic-forecast-2030 (accessed Aug 26, 2021).Suche in Google Scholar

Cheng, H., Yang, Y., Li, S., Hong, J., Jang, G. (2015) Modification and extrusion coating of polylactic acid films. J. Appl. Polym. Sci. 132(35):42472.10.1002/app.42472Suche in Google Scholar

Courgneau, C., Domenek, S., Lebossé, R., Guinault, A., Avérous, L., Ducruet, V. (2012) Effect of crystallization on barrier properties of formulated polylactide. Polym. Int. 61(2):180–189.10.1002/pi.3167Suche in Google Scholar

Evstatiev, M., Simeonova, S., Friedrich, K., Pei, X.Q., Formanek, P. (2013) MFC-structured biodegradable poly (l-lactide)/poly (butylene adipate-co-terephatalate) blends with improved mechanical and barrier properties. J. Mater. Sci. 48(18):6312–6330.10.1007/s10853-013-7431-5Suche in Google Scholar

Ghassemi, A., Moghaddamzadeh, S., Duchesne, C., Rodrigue, D. (2017) Effect of annealing on gas permeability and mechanical properties of polylactic acid/talc composite films. J. Plast. Film Sheeting 33(4):361–383.10.1177/8756087917694618Suche in Google Scholar

Girdthep, S., Worajittiphon, P., Molloy, R., Lumyong, S., Leejarkpai, T., Punyodom, W. (2014) Biodegradable nanocomposite blown films based on poly (lactic acid) containing silver-loaded kaolinite: A route to controlling moisture barrier property and silver ion release with a prediction of extended shelf life of dried longan. Polymer 55(26):6776–6788.10.1016/j.polymer.2014.10.066Suche in Google Scholar

Glasenapp, A.O., Sundin, M., Nordlinder, J., Berthold, J., Alfthan, J. (2018) Water-free bonding of corrugated board. In: The 21st IAPRI World conference on packaging, Zhuhai, China. pp. 608–616.10.12783/iapri2018/24438Suche in Google Scholar

Helanto, K., Matikainen, L., Talja, R., Rojas, O. (2019) Bio-based Polymers for Sustainable Packaging and Biobarriers: A Critical Review. BioResources 14(2):4902–4951.10.15376/biores.14.2.HelantoSuche in Google Scholar

Helanto, K., Talja, R., Rojas, O. (2021a) Effects of talc, kaolin and calcium carbonate as fillers in biopolymer packaging materials. J. Polym. Eng. 41(9):746–758.10.1515/polyeng-2021-0076Suche in Google Scholar

Helanto, K., Talja, R., Rojas, O.J. (2021b) Talc reinforcement of PLA and biodegradable polyester blends via injection-molding and pilot-scale film extrusion. J. Appl. Polym. Sci. 138(41):e51225.10.1002/app.51225Suche in Google Scholar

Helanto, K., Talja, R., Li, S., Rojas, O.J. (2022) Effect of filler additions on pilot-scale extrusion coating of paperboard with PLA-based blends. Nord. Pulp Pap. Res. J. https://doi.org/10.1515/npprj-2021-0070.10.1515/npprj-2021-0070Suche in Google Scholar

Jain, S., Misra, M., Mohanty, A.K., Ghosh, A.K. (2012) Thermal, mechanical and rheological behavior of poly (lactic acid)/talc composites. J. Polym. Environ. 20(4):1027–1037.10.1007/s10924-012-0500-zSuche in Google Scholar

Jain, S., Reddy, M.M., Mohanty, A.K., Misra, M., Ghosh, A.K. (2010) A new biodegradable flexible composite sheet from poly (lactic acid)/poly (ε-caprolactone) blends and Micro-Talc. Macromol. Mater. Eng. 295(8):750–762.10.1002/mame.201000063Suche in Google Scholar

Kale, G., Auras, R., Singh, S.P. (2006) Degradation of commercial biodegradable packages under real composting and ambient exposure conditions. J. Polym. Environ. 14(3):317–334.10.1007/s10924-006-0015-6Suche in Google Scholar

Kale, G., Auras, R., Singh, S.P. (2007a) Comparison of the degradability of poly (lactide) packages in composting and ambient exposure conditions. Packag. Technol. Sci. 20(1):49–70.10.1002/pts.742Suche in Google Scholar

Kale, G., Kijchavengkul, T., Auras, R., Rubino, M., Selke, S.E., Singh, S.P. (2007b) Compostability of bioplastic packaging materials: an overview. Macromol. Biosci. 7(3):255–277.10.1002/mabi.200600168Suche in Google Scholar PubMed

Khajeheian, M.B., Kotkamo, S., Kuusipalo, J., Rosling, A. (2016) Synthesis and Characterization of Linear and Tri-Block PLLA–PEG–PLLA Blends. Polym.-Plast. Technol. Eng. 55(4):379–390.10.1080/03602559.2015.1055502Suche in Google Scholar

Khuenkeao, T., Petchwattana, N., Covavisaruch, S. (2016) Thermal and mechanical properties of bioplastic poly(lactic acid) compounded with silicone rubber and talc. AIP Conf. Proc. 1713(1):080005.10.1063/1.4942294Suche in Google Scholar

Kirwan, M.J. Handbook of paper and paperboard packaging technology, , 2nd edn. Wiley-Blackwell, 2013.10.1002/9781118470930Suche in Google Scholar

Koppolu, R., Lahti, J., Abitbol, T., Swerin, A., Kuusipalo, J., Toivakka, M. (2019) Continuous processing of nanocellulose and polylactic acid into multilayer barrier coatings. ACS Appl. Mater. Interfaces 11(12):11920–11927.10.1021/acsami.9b00922Suche in Google Scholar PubMed PubMed Central

Kosior, E., Braganca, R.M., Fowler, P. (2006) Lightweight compostable packaging: literature review. Waste Resour. Action Programme 26:1–48.Suche in Google Scholar

Kuusipalo, J. (2008) Papermaking science and technology. In: Book 12, Paper and paperboard converting, 2nd edn. Finnish Paper Engineers’ Association/Paperi ja Puu Oy, Helsinki.Suche in Google Scholar

Lahti, J., Kuusipalo, J., Auvinen, S. (2017) Novel equipment to simulate hot air heat sealability of packaging materials. In: 16th TAPPI European PLACE Conference 2017. pp. 237–248.Suche in Google Scholar

Lahtinen, K., Johansson, P., Kääriäinen, T., Cameron, D.C. (2012) Adhesion of extrusion-coated polymer sealing layers to a fiber-based packaging material with an atomic layer deposited aluminum oxide surface coating. Polym. Eng. Sci. 52(9):1985–1990.10.1002/pen.23148Suche in Google Scholar

Lahtinen, K., Kotkamo, S., Koskinen, T., Auvinen, S., Kuusipalo, J. (2009) Characterization for water vapour barrier and heat sealability properties of heat-treated paperboard/polylactide structure. Packag. Technol. Sci. 22(8):451–460.10.1002/pts.869Suche in Google Scholar

Lahtinen, K., Maydannik, P., Johansson, P., Kääriäinen, T., Cameron, D.C., Kuusipalo, J. (2011) Utilisation of continuous atomic layer deposition process for barrier enhancement of extrusion-coated paper. Surf. Coat. Technol. 205(15):3916–3922.10.1016/j.surfcoat.2011.02.009Suche in Google Scholar

Lee, C., Pang, M.M., Koay, S.C., Choo, H.L., Tshai, K.Y. (2020) Talc filled polylactic-acid biobased polymer composites: Tensile, thermal and morphological properties. SN Appl. Sci. 2(3):1–6.10.1007/s42452-020-2172-ySuche in Google Scholar

Massey, L.K. Permeability properties of plastics and elastomers, 2nd Ed: A guide to packaging and barrier materials. Elsevier Science & Technology Books, Norwich, 2003.10.1016/B978-188420797-6.50095-4Suche in Google Scholar

Matusik, J., Stodolak, E., Bahranowski, K. (2011) Synthesis of polylactide/clay composites using structurally different kaolinites and kaolinite nanotubes. Appl. Clay Sci. 51(1-2):102–109.10.1016/j.clay.2010.11.010Suche in Google Scholar

Musioł, M., Sikorska, W., Adamus, G., Janeczek, H., Richert, J., Malinowski, R., Jiang, G., Kowalczuk, M. (2016) Forensic engineering of advanced polymeric materials. Part III-Biodegradation of thermoformed rigid PLA packaging under industrial composting conditions. Waste Manag. 52:69–76.10.1016/j.wasman.2016.04.016Suche in Google Scholar

Ojanen, M., Lepo, A., Rajala, K. (2021) How barrier coated boards repulp. In: 30th PTS Coating Symposium. pp. 2021.Suche in Google Scholar

Ouchiar, S., Stoclet, G., Cabaret, C., Georges, E., Smith, A., Martias, C., Addad, A., Gloaguen, V. (2015) Comparison of the influence of talc and kaolinite as inorganic fillers on morphology, structure and thermomechanical properties of polylactide based composites. Appl. Clay Sci. 116:231–240.10.1016/j.clay.2015.03.020Suche in Google Scholar

Ouchiar, S., Stoclet, G., Cabaret, C., Gloaguen, V. (2016) Influence of the filler nature on the crystalline structure of polylactide-based nanocomposites: new insights into the nucleating effect. Macromolecules 49(7):2782–2790.10.1021/acs.macromol.5b02746Suche in Google Scholar

Ozkoc, G., Kemaloglu, S. (2009) Morphology, biodegradability, mechanical, and thermal properties of nanocomposite films based on PLA and plasticized PLA. J. Appl. Polym. Sci. 114(4):2481–2487.10.1002/app.30772Suche in Google Scholar

Pantani, R., Sorrentino, A. (2013) Influence of crystallinity on the biodegradation rate of injection-moulded poly (lactic acid) samples in controlled composting conditions. Polym. Degrad. Stab. 98(5):1089–1096.10.1016/j.polymdegradstab.2013.01.005Suche in Google Scholar

Phetwarotai, W., Aht-Ong, D. (2016) Isothermal crystallization behaviors and kinetics of nucleated polylactide/poly(butylene adipate-co-terephthalate) blend films with talc. J. Therm. Anal. Calorim. 126(3):1797–1808.10.1007/s10973-016-5669-2Suche in Google Scholar

Piekarska, K., Piorkowska, E., Bojda, J. (2017) The influence of matrix crystallinity, filler grain size and modification on properties of PLA/calcium carbonate composites. Polym. Test. 62:203–209.10.1016/j.polymertesting.2017.06.025Suche in Google Scholar

Rastogi, V.K., Samyn, P. (2015) Bio-based coatings for paper applications. Coatings 5(4):887–930.10.3390/coatings5040887Suche in Google Scholar

Ray, S.S., Yamada, K., Okamoto, M., Ueda, K. (2003) New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of material properties, biodegradability and melt rheology. Polymer 44(3):857–866.10.1016/S0032-3861(02)00818-2Suche in Google Scholar

Rhim, J.W., Kim, J.H. (2009) Properties of poly (lactide)-coated paperboard for the use of 1-way paper cup. J. Food Sci. 74(2):E105–E111.10.1111/j.1750-3841.2009.01073.xSuche in Google Scholar PubMed

Robertson, G.L. (2021) Recycling of Aseptic Beverage Cartons: A Review. Recycling 6(1):20.10.3390/recycling6010020Suche in Google Scholar

Rocha, D., Souza de Carvalho, J., de Oliveira, S., dos Santos Rosa, D. (2018) A new approach for flexible PBAT/PLA/CaCO 3 films into agriculture. J. Appl. Polym. Sci. 135(35):46660.10.1002/app.46660Suche in Google Scholar

Sabzi, M., Jiang, L., Atai, M., Ghasemi, I. (2012) PLA/sepiolite and PLA/calcium carbonate nanocomposites: A comparison study. J. Appl. Polym. Sci. 129(4):1734–1744.10.1002/app.38866Suche in Google Scholar

Schoukens, G., Breen, C., Baschetti, M.G., Elegir, G., Vähä-Nissi, M., Liu, Q., Tiekstra, S., Simon, P. (2014) Complex packaging structures based on wood derived products: Actual and future possibilities for 1-way food packages. J. Mater. Sci. Res. 3(4):58.10.5539/jmsr.v3n4p58Suche in Google Scholar

Segura González, E.A., Olmos, D., González-Gaitano, G., Orgaz, B., González-Benito, J. (2015) Effect of kaolin nanofiller and processing conditions on the structure, morphology, and biofilm development of polylactic acid. J. Appl. Polym. Sci. 132(42):42676.10.1002/app.42676Suche in Google Scholar

Seoane, I., Luzi, F., Puglia, D., Cyras, V., Manfredi, L. (2018) Enhancement of paperboard performance as packaging material by layering with plasticized polyhydroxybutyrate/nanocellulose coatings. J. Appl. Polym. Sci. 135(48):46872.10.1002/app.46872Suche in Google Scholar

Sonjui, T., Jiratumnukul, N. (2014) Poly (lactic acid) organoclay nano composites for paper coating applications. Songklanakarin J. Sci. Technol. 36(5):535–540.Suche in Google Scholar

Sundar, N., Kumar, A., Pavithra, A., Ghosh, S. (2020) Studies on semi-crystalline poly lactic acid (PLA) as a hydrophobic coating material on kraft paper for imparting barrier properties in coated abrasive applications. Prog. Org. Coat. 145:105682.10.1016/j.porgcoat.2020.105682Suche in Google Scholar

Thellen, C., Orroth, C., Froio, D., Ziegler, D., Lucciarini, J., Farrell, R., D’Souza, N.A., Ratto, J.A. (2005) Influence of montmorillonite layered silicate on plasticized poly (l-lactide) blown films. Polymer 46(25):11716–11727.10.1016/j.polymer.2005.09.057Suche in Google Scholar

Tokiwa, Y., Calabia, B.P. (2006) Biodegradability and biodegradation of poly (lactide). Appl. Microbiol. Biotechnol. 72(2):244–251.10.1007/s00253-006-0488-1Suche in Google Scholar PubMed

Yam, K.L. The Wiley encyclopedia of packaging technology, 3rd edn. John Wiley & Sons, New York, 2009.10.1002/9780470541395Suche in Google Scholar

Yu, F., Liu, T., Zhao, X., Yu, X., Lu, A., Wang, J. (2012) Effects of talc on the mechanical and thermal properties of polylactide. J. Appl. Polym. Sci. 125(S2):E99–E109.10.1002/app.36260Suche in Google Scholar

Yu, M., Zheng, Y., Tian, J. (2020) Study on the biodegradability of modified starch/polylactic acid (PLA) composite materials. RSC Adv. 10(44):26298–26307.10.1039/D0RA00274GSuche in Google Scholar

Zou, G., Jiao, Q., Zhang, X., Zhao, C., Li, J. (2015) Crystallization behavior and morphology of poly(lactic acid) with a novel nucleating agent. J. Appl. Polym. Sci. 132:41367.10.1002/app.41367Suche in Google Scholar
Received: 2021-11-24
Accepted: 2022-01-16
Published Online: 2022-01-28
Published in Print: 2022-03-28

© 2022 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Chemical pulping
  3. Evaluation of fines separation from unbleached softwood kraft pulp using microperforated hole screens
  4. Evaluation of pulp and paper making properties of Caesalpinia decapetela
  5. Novel bulking technologies for cellulose fibres
  6. Mechanical pulping
  7. Interpretation of force profiles in mill-scale LC refining
  8. Effects of plate wear on bar forces and fiber properties in a mill scale LC-refiner
  9. Paper technology
  10. Research on the physical properties of calcium sulfate whisker and the effects of its addition on paper and its printing performance
  11. Preparation and properties of an intelligent adjustable functional paper for organic cultural relics
  12. Paper chemistry
  13. Application of DSA to improve strength of thermomechanical pulp blended paper
  14. Coating
  15. The influence of pigment modulus on failure resistance of paper barrier coatings
  16. Effect of filler additions on pilot-scale extrusion coating of paperboard with PLA-based blends
  17. Packaging
  18. Influence of paper properties on adhesive strength of starch gluing
  19. Environmental impact
  20. Interfering elements on determination of hexavalent chromium in paper materials with UV-vis spectrophotometry
  21. Nanotechnology
  22. Enhanced mechanical and gas barrier performance of plasticized cellulose nanofibril films
  23. Lignin
  24. The preparations of nanoporous carbon with multi-heteroatoms co-doping from black liquor powders for supercapacitors
  25. Miscellaneous
  26. Hybrid films from plant and bacterial nanocellulose: mechanical and barrier properties
  27. Mass-balance based soft sensor for monitoring ash content at two-ply paperboard manufacturing
  28. Investigation of the effect of light fastness on the color changes of maps prepared by electrophotographic digital printing
  29. Bulking of cellulose fibres – a review
  30. Preparation of O-HACC/HEC-acrylate emulsion and its application in paper protection
  31. Mineral-filled biopolyester coatings for paperboard packaging materials: barrier, sealability, convertability and biodegradability properties
https://doi.org/10.1515/npprj-2021-0076
Schlagwörter für diesen Artikel
biopolymer; coating; converting; filler; packaging

Artikel in diesem Heft

  1. Frontmatter
  2. Chemical pulping
  3. Evaluation of fines separation from unbleached softwood kraft pulp using microperforated hole screens
  4. Evaluation of pulp and paper making properties of Caesalpinia decapetela
  5. Novel bulking technologies for cellulose fibres
  6. Mechanical pulping
  7. Interpretation of force profiles in mill-scale LC refining
  8. Effects of plate wear on bar forces and fiber properties in a mill scale LC-refiner
  9. Paper technology
  10. Research on the physical properties of calcium sulfate whisker and the effects of its addition on paper and its printing performance
  11. Preparation and properties of an intelligent adjustable functional paper for organic cultural relics
  12. Paper chemistry
  13. Application of DSA to improve strength of thermomechanical pulp blended paper
  14. Coating
  15. The influence of pigment modulus on failure resistance of paper barrier coatings
  16. Effect of filler additions on pilot-scale extrusion coating of paperboard with PLA-based blends
  17. Packaging
  18. Influence of paper properties on adhesive strength of starch gluing
  19. Environmental impact
  20. Interfering elements on determination of hexavalent chromium in paper materials with UV-vis spectrophotometry
  21. Nanotechnology
  22. Enhanced mechanical and gas barrier performance of plasticized cellulose nanofibril films
  23. Lignin
  24. The preparations of nanoporous carbon with multi-heteroatoms co-doping from black liquor powders for supercapacitors
  25. Miscellaneous
  26. Hybrid films from plant and bacterial nanocellulose: mechanical and barrier properties
  27. Mass-balance based soft sensor for monitoring ash content at two-ply paperboard manufacturing
  28. Investigation of the effect of light fastness on the color changes of maps prepared by electrophotographic digital printing
  29. Bulking of cellulose fibres – a review
  30. Preparation of O-HACC/HEC-acrylate emulsion and its application in paper protection
  31. Mineral-filled biopolyester coatings for paperboard packaging materials: barrier, sealability, convertability and biodegradability properties
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 3.11.2025 von https://www.degruyterbrill.com/document/doi/10.1515/npprj-2021-0076/html
Button zum nach oben scrollen