Compression behavior of the wood-inspired cellular structure of acrylonitrile butadiene styrene
-
Murat Aydın
Dr. Murat Aydın was born in 1981 in Trabzon. He received his BSc degree in Furniture and Decoration Education (2008) and Woodworks Industrial Engineering (2018) at Dumlupınar University. He wroked as interior designer, production planning supervisor, and chief of production in the Architecture, Furniture, Yacht Interior Production companies, respectively. He received his MSc and PhD degress in the field of Forest Industry Machines and Management (Istanbul University) and Composite Materials Technologies (Düzce University) in 2012 and 2018, respectively. He has been working as Assoc. Prof. at Isparta University of Applied Sciences.
Abstract
In wood science and technology, researchers increasingly focus on the additive manufacturing in different aspects through assembly, mechanical, and physical characterization of the printed parts. One of the main parameters influence the wood features is the inhomogeneity of cellular structure. The effect of dislocation on the compression behavior was evaluated over the wood-inspired cellular structure. The 4.4 × 4.4 mm cross-cut–sized cell (0.8 mm cell wall thickness and 2.8 mm lumen diameter) with 10 mm thickness was arrayed by 6 columns and 3 rows to design the control model. The middle row was 0.8, 1.6, and 2.4 mm dislocated to obtain irregular models. Objects were fabricated through the deposition of acrylonitrile butadiene styrene filament using DaVinci 1.0 all in one three-dimensional printer. The effect of printing orientation (vertical and horizontal) on compression behavior was also figured out. The compression test was performed to obtain the load–deformation behavior of samples. According to the results, the horizontally printed samples presented better performance. Furthermore, horizontal alignment, rectilinear infill type, 90 % infill density, and 0.2 mm layer height combination presented the highest (5719 N) load-carrying capacity. The statistical analysis (P < 0.05) figured out that cell dislocation has significant influences on mechanical properties.
About the author
Dr. Murat Aydın was born in 1981 in Trabzon. He received his BSc degree in Furniture and Decoration Education (2008) and Woodworks Industrial Engineering (2018) at Dumlupınar University. He wroked as interior designer, production planning supervisor, and chief of production in the Architecture, Furniture, Yacht Interior Production companies, respectively. He received his MSc and PhD degress in the field of Forest Industry Machines and Management (Istanbul University) and Composite Materials Technologies (Düzce University) in 2012 and 2018, respectively. He has been working as Assoc. Prof. at Isparta University of Applied Sciences.
Acknowledgments
The author would like to thank Prof. Dr. rer. nat. Manfred P. Hentschel for valuable contributions and the Department of Machine.
-
Research ethics: Not applicable.
-
Author contributions: The author has accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Competing interests: The author states no conflict of interest.
-
Research funding: This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.
-
Data availability: The raw data can be obtained on request from the corresponding author.
References
[1] Additive Manufacturing – General Principles – Fundamentals and Vocabulary, ISO/ASTM 52900:2021(E). Feb 2023 [Online]. Available: https://www.iso.org/standard/74514.html.Suche in Google Scholar
[2] I. Gibson, D. Rosen, B. Stucker, and M. Khorasani, Additive Manufacturing Technologies, 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, New York, USA, Springer, 2021.10.1007/978-3-030-56127-7_18Suche in Google Scholar
[3] A. Gebhardt, Understanding Additive Manufacturing, Rapid Prototyping, Rapid Tooling, Rapid Manufacturing, Munich, Germany, Hanser, 2011.10.3139/9783446431621.fmSuche in Google Scholar
[4] F. Buonamici, Y. Volpe, R. Furferi, et al.., “Bamboo’s bio-inspired material design through additive manufacturing technologies,” in Digital Wood Desing, Lecture Notes in Civil Engineering, F. Bianconi and M. Filippucci, Eds., New York, USA, Springer, 2019, pp. 809–826.10.1007/978-3-030-03676-8_32Suche in Google Scholar
[5] C. K. Chua, C. H. Wong, and W. Y. Yeong, Standards, Quality Control, and Measurement Sciences in 3D Printing and Additive Manufacturing, Cambridge, USA, Academic Press, 2017.10.1016/B978-0-12-813489-4.00008-8Suche in Google Scholar
[6] A. Nicolau, M. Alin Pop, and C. Coşereanu, “3D printing application in wood furniture components assembling,” Materials, vol. 15, no. 2907, pp. 1–15, 2022, https://doi.org/10.3390/ma15082907.Suche in Google Scholar PubMed PubMed Central
[7] T. Yılmaz Aydın, “Do it yourself furniture: part A – designing fittings for an easy to manufacture hybrid chair,” Mobilya ve Ahşap Malzeme Araştırmaları Dergisi, vol. 5, no. 1, pp. 50–60, 2022, https://doi.org/10.33725/mamad.1129596.Suche in Google Scholar
[8] M. Aydin, “Additive manufacturing: is it a new era for furniture production?” J. Mech. Eng. Autom., vol. 5, pp. 338–347, 2015, https://doi.org/10.17265/2159-5275/2015.06.002.Suche in Google Scholar
[9] M. Aydin, “Use of 3D printing in furniture production,” in International Symposium on Innovative Technologies in Engineering and Science, Valencia, Spain, 2015, pp. 590–599.Suche in Google Scholar
[10] J. Mai, E. D. O. Barata, S. K. Löschke, and G. Proust, “Fabricating wood-like textures on multicurved 3D printed architectural elements,” 3D Print. Addit. Manuf., vol. 10, no. 1, pp. 15–22, 2023, https://doi.org/10.1089/3DP.2021.0139.Suche in Google Scholar PubMed PubMed Central
[11] M. Aydin and T. Y. Aydin, “Bio-mimicry: tree rings and three-dimensional printing – preliminary biomimetic experiments with fused deposition modeling using acrylonitrile butadiene styrene filament,” Bioresources, vol. 17, no. 4, pp. 6588–6597, 2022, https://doi.org/10.15376/BIORES.17.4.6588-6597.Suche in Google Scholar
[12] K. Markstedt, K. Håkansson, G. Toriz, and P. Gatenholm, “Materials from trees assembled by 3D printing – wood tissue beyond nature limits,” Appl. Mater. Today, vol. 15, pp. 280–285, 2019, https://doi.org/10.1016/J.APMT.2019.02.005.Suche in Google Scholar
[13] R. M. Saad, “The revolution of materials used in 3D printing applications in furniture & interior design,” Int. Des. J. vol. 6, no. 3, pp. 143–163, https://doi.org/10.12816/0036501.Suche in Google Scholar
[14] K. Ueda, “Interlocking 3D-printed bars, trusses and space frames to build arbitrarily large structures,” Engineering engrxiv archive, 2022, [Online]. Available at: https://engrxiv.org/preprint/view/2338/4547 [accessed: Nov. 19, 2022].10.31224/2338Suche in Google Scholar
[15] D. Krapež Tomec, A. Straže, A. Haider, and M. Kariž, “Hygromorphic response dynamics of 3D-printed wood-PLA composite bilayer actuators,” Polymers, vol. 13, no. 19, p. 3209, 2021, https://doi.org/10.3390/polym13193209.Suche in Google Scholar PubMed PubMed Central
[16] J. Mai, C. Thistleton, S. K. Löschke, G. Proust, and A. Dong, “Towards a new techno-aesthetic paradigm: experiments with pattern, texture and colour in 3D-printed wood-plastic composites,” in 26th Annual International Solid Freeform Fabrication Symposium, Texas, USA, 2016, pp. 1868–1877.Suche in Google Scholar
[17] E. Vazquez and B. Gursoy, “3D printed responsive wood interfaces: shape-changing origami-inspired prototypes,” in SiGraDi2020 Transformative Design Online Conference, Columbia, Universidad Pontifica Bolivariana, 2020, pp. 600–607.10.5151/sigradi2020-83Suche in Google Scholar
[18] D. Krapež Tomec, A. Balzano, J. Žigon, M. Šernek, and M. Kariž, “The effect of printing parameters and wood surface preparation on the adhesion of directly 3D-printed PLA on wood,” J. Renew. Mater., vol. 10, no. 7, pp. 1787–1796, 2022, https://doi.org/10.32604/JRM.2022.019760.Suche in Google Scholar
[19] D. Kam, M. Layani, B. Minerbi, et al.., “Additive manufacturing of 3D structures composed of wood materials,” Adv. Mater. Technol., vol. 4, pp. 1–6, 2019, https://doi.org/10.1002/admt.201900158.Suche in Google Scholar
[20] A. K. Das, D. A. Agar, M. Rudolfsson, and S. H. Larsson, “A review on wood powders in 3D printing: processes, properties and potential applications,” J. Mater. Res. Technol., vol. 15, pp. 241–255, 2021, https://doi.org/10.1016/J.JMRT.2021.07.110.Suche in Google Scholar
[21] J. I. Montalvo Navarrete, M. A. Hidalgo-Salazar, E. Escobar Nunez, and A. J. Rojas Arciniegas, “Thermal and mechanical behavior of biocomposites using additive manufacturing,” Int. J. Interact. Des. Manuf., vol. 12, no. 2, pp. 449–458, 2018, https://doi.org/10.1007/s12008-017-0411-2.Suche in Google Scholar
[22] M. Kariz, M. Sernek, M. Obućina, and M. K. Kuzman, “Effect of wood content in FDM filament on properties of 3D printed parts,” Mater. Today Commun., vol. 14, pp. 135–140, 2018, https://doi.org/10.1016/j.mtcomm.2017.12.016.Suche in Google Scholar
[23] Y. Tao, H. Wang, Z. Li, P. Li, and S. Q. Shi, “Development and application of wood flour-filled polylactic acid composite filament for 3D printing,” Materials, vol. 10, no. 4, p. 339, 2017, https://doi.org/10.3390/ma10040339.Suche in Google Scholar PubMed PubMed Central
[24] M. Ibrahim, N. S. Badrishah, N. Sa’ude, and M. H. I. Ibrahim, “Sustainable natural bio composite for FDM feedstocks,” Appl. Mech. Mater., vol. 607, pp. 65–69, 2014, https://doi.org/10.4028/www.scientific.net/AMM.607.65.Suche in Google Scholar
[25] R. Plarre, A. Zocca, A. Spitzer, et al.., “Searching for biological feedstock material: 3D printing of wood particles from house borer and drywood termite frass,” PLoS One, vol. 16, no. 2, pp. 1–12, 2021, https://doi.org/10.1371/JOURNAL.PONE.0246511.Suche in Google Scholar PubMed PubMed Central
[26] D. Correa, A. Papadopoulou, C. Guberan, et al.., “3D-printed wood: programming hygroscopic material transformations,” 3D Print. Addit. Manuf., vol. 2, no. 3, pp. 106–116, 2015, https://doi.org/10.1089/3DP.2015.0022.Suche in Google Scholar
[27] J. S. Zhang, Y. T. Yang, Z. K. Qin, J. J. Luo, W. Gao, S. L. Wei, “Research progress of the modified wood powder for 3D printing,” Adv. Eng. Research, vol. 79, pp. 574–577, 2016, https://doi.org/10.2991/MMME-16.2016.217.Suche in Google Scholar
[28] Y. Öztürk and E. Burdurlu, “The effect of wood veneer lamination on the flexural strength of the material produced with 3D-printed material,” J. Bartin Fac. For., vol. 23, no. 3, pp. 885–891, 2021, https://doi.org/10.24011/barofd.963190.Suche in Google Scholar
[29] Standard Test Method for Compressive Properties of Rigid Plastics, ASTM D695, 2015, [Online]. Available: https://www.astm.org/d0695-15.html?a=.Suche in Google Scholar
[30] Plastics – Determination of Compressive Properties, ISO 604, 2002, [Online]. Available: https://www.iso.org/obp/ui/#iso:std:iso:604:ed-3:v1:en.Suche in Google Scholar
[31] C. Huang, M. Gong, Y. Chui, and F. Chan, “Mechanical behaviour of wood compressed in radial direction-part I. New method of determining the yield stress of wood on the stress-strain curve,” J. Bioresour. Bioprod., vol. 5, no. 3, pp. 186–195, 2020, https://doi.org/10.1016/j.jobab.2020.07.004.Suche in Google Scholar
[32] J. F. Ramírez, M. Cardona, J. A. Velez, et al.., “Numerical modeling and simulation of uniaxial compression of aluminum foams using FEM and 3D-CT images,” Procedia Mater. Sci., vol. 4, pp. 227–231, 2014, https://doi.org/10.1016/j.mspro.2014.07.609.Suche in Google Scholar
[33] T. Tabara, “Compression perpendicular-to-grain behavior of wood,” Ph.D. dissertation, Department of Civil Engineering, The University of New Brunswick, Brunswick, Canada, 1999.Suche in Google Scholar
[34] M. Jakob and W. Gindl-Altmutter, “The effect of partial delignification on the stress–strain relationship in transverse compression,” J. Mater. Sci., vol. 58, no. 3, pp. 1071–1085, 2023, https://doi.org/10.1007/s10853-022-08074-y.Suche in Google Scholar
[35] J. Hao, X. Wu, G. Oporto-Velasquez, J. Wang, and G. Dahle, “Compression properties and its prediction of wood-based sandwich panels with a novel taiji honeycomb core,” Forests, vol. 11, no. 8, p. 886, 2020, https://doi.org/10.3390/f11080886.Suche in Google Scholar
[36] D. Wang and Z. Bai, “Mechanical property of paper honeycomb structure under dynamic compression,” Mater. Des., vol. 77, pp. 59–64, 2015, https://doi.org/10.1016/j.matdes.2015.03.037.Suche in Google Scholar
[37] A. da Silva and S. Kyriakides, “Compressive response and failure of balsa wood,” Int. J. Solids Struct., vol. 44, nos. 25–26, pp. 8685–8717, 2007, https://doi.org/10.1016/j.ijsolstr.2007.07.003.Suche in Google Scholar
[38] F. de Magistris and L. Salmén, “Mechanical behaviour of wet wood in sequences of compression and combined compression and shear,” Nord. Pulp Pap Res. J., vol. 21, no. 2, pp. 231–236, 2006, https://doi.org/10.3183/npprj-2006-21-02-p231-236.Suche in Google Scholar
[39] M. Güden and H. Kavi, “Quasi-static axial compression behavior of constraint hexagonal and square-packed empty and aluminum foam-filled aluminum multi-tubes,” Thin-Walled Struct., vol. 44, no. 7, pp. 739–750, 2006, https://doi.org/10.1016/j.tws.2006.07.003.Suche in Google Scholar
© 2023 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Performance of additively manufactured Ti6Al4V ELI finger joints: biomechanical testing and evaluation for arthritis management
- Mechanical and microstructural characterization of resistance spot welded dissimilar TWIP1000/TRIP800 joints
- Effect of particle size on the properties of avocado pear wood fiber/low-density polyethylene composite enhanced by pretreatment
- Design optimization of hybrid material B-pillar under crush loading
- Pack-boriding of Sleipner steel: microstructure analysis and kinetics modeling
- Structural comparison of conventional and chiral auxetic morphed aircraft rib
- Compression behavior of the wood-inspired cellular structure of acrylonitrile butadiene styrene
- Adhesive wear behavior and microstructure of FeCr–FeMn–FeB–C coatings
- Dry sliding wear behavior of AA7075 alloy produced by thixocasting
- Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel
- Investigation of the effects of halloysite nanoclay on friction and wear behavior of automotive brake pads
- Identifying stir casting process parameters to maximize strength of LM13 with TiB2 and ZrC hybrid metal matrix composite
- Effect of gas metal arc and cold metal transfer arc welding processes on microstructure and mechanical properties of AA8011-H18 alloy joints
- Anisotropy effects on the tensile properties of AA5052 and AA5052-PVC-AA5052 sandwich sheets
Artikel in diesem Heft
- Frontmatter
- Performance of additively manufactured Ti6Al4V ELI finger joints: biomechanical testing and evaluation for arthritis management
- Mechanical and microstructural characterization of resistance spot welded dissimilar TWIP1000/TRIP800 joints
- Effect of particle size on the properties of avocado pear wood fiber/low-density polyethylene composite enhanced by pretreatment
- Design optimization of hybrid material B-pillar under crush loading
- Pack-boriding of Sleipner steel: microstructure analysis and kinetics modeling
- Structural comparison of conventional and chiral auxetic morphed aircraft rib
- Compression behavior of the wood-inspired cellular structure of acrylonitrile butadiene styrene
- Adhesive wear behavior and microstructure of FeCr–FeMn–FeB–C coatings
- Dry sliding wear behavior of AA7075 alloy produced by thixocasting
- Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel
- Investigation of the effects of halloysite nanoclay on friction and wear behavior of automotive brake pads
- Identifying stir casting process parameters to maximize strength of LM13 with TiB2 and ZrC hybrid metal matrix composite
- Effect of gas metal arc and cold metal transfer arc welding processes on microstructure and mechanical properties of AA8011-H18 alloy joints
- Anisotropy effects on the tensile properties of AA5052 and AA5052-PVC-AA5052 sandwich sheets
