Startseite Dry sliding wear behavior of AA7075 alloy produced by thixocasting
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Dry sliding wear behavior of AA7075 alloy produced by thixocasting

  • Hudaverdi Bilgen

    Mr. Hudaverdi Bilgen was born in 1978 and works at the FNSS Defense Systems Inc., Ankara, Turkey. He received his BSc degree from the Department of Metallurgy Education, Gazi University, in 2000. He received his MSc degree from Gazi University in 2022. His areas of interest include tribology, semi-solid metal processing, and computer-aided design.

         , Omer Sahin

    Mr. Omer Sahin was born in 1988 and works at the Department of Metallurgical and Materials Engineering, Gazi University, Ankara, Turkey. He received his BSc and MSc degrees from the Department of Metallurgical and Materials Engineering, Karadeniz Technical University, in 2015 and 2018, respectively. His research interests include heat treatments of steels and cast irons, materials characterization, and mechanical tests.

         , Neset Akar

    Assoc. Prof. Dr. Neset Akar was born in 1973 and works at the Department of Metallurgical and Materials Engineering, Gazi University, Ankara, Turkey. He graduated from the Department of Metallurgy Education from Gazi University in 1996. He received his MSc and PhD degrees from Gazi University in 2000 and 2006. His research interests include casting technologies, computer-aided casting design, and semi-solid processing of aluminum alloys.

         und Volkan Kilicli

    Assoc. Prof. Dr. Volkan Kilicli was born in 1980 and works at the Department of Metallurgical and Materials Engineering, Gazi University, Ankara, Turkey. He graduated from the Department of Metallurgy Education from Gazi University in 2001. He received his MSc and PhD degrees from Gazi University in 2004 and 2010. His research interests include heat treatments of steels and cast irons, semi-solid processing of aluminum alloys, self-healing metallic materials, and metal matrix composites.

     ORCID logo EMAIL logo
Veröffentlicht/Copyright: 28. November 2023
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Materials Testing
Aus der Zeitschrift Materials Testing Band 66 Heft 1

Abstract

In this study, the wear behavior of AA7075 alloy produced by thixocasting was investigated. The wear behavior of the AA7075 alloy is examined for three cases: extruded with T6 heat treatment, as-thixocast, and thixocast with T6 conditions. The dry sliding wear test was conducted with a tribometer according to ASTM G-99 standard. The microstructures were characterized by optical microscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray analysis (EDX). The tensile and hardness tests were performed to evaluate the mechanical properties. The AA7075 alloy was successfully shaped by thixocasting. The as-thixocast sample exhibited typical globular structures with multinary eutectic structures along the grain boundaries. The globular grains transform into a polygonal structure, and the grain size increases from 50 μm to 60 μm in the thixocast + T6 sample. This microstructure exhibited excellent wear resistance under dry sliding conditions in the thixocast + T6 sample. The aging treatment with prolonged solution process improved the mechanical properties two times and the wear rate three times for the thixocast AA7075 alloy. Furthermore, the thixocast + T6 sample exhibited a significant decrease in the coefficient of friction with the lowest wear rate compared to the as-thixocast sample. The dominant wear mechanisms are microdelamination, adhesion, and oxidation in all samples.

Keywords: AA7075 alloy; wear behavior; semi-solid metal processing; thixocasting; T6 heat treatment
Corresponding author: Volkan Kilicli, Department of Metallurgical and Materials Engineering, Faculty of Technology, Gazi Universitesi, Ankara, 06560, Türkiye, E-mail:

Funding source: Devlet Planlama Teskilati

Award Identifier / Grant number: 2003K120470-27

About the authors

Hudaverdi Bilgen

Mr. Hudaverdi Bilgen was born in 1978 and works at the FNSS Defense Systems Inc., Ankara, Turkey. He received his BSc degree from the Department of Metallurgy Education, Gazi University, in 2000. He received his MSc degree from Gazi University in 2022. His areas of interest include tribology, semi-solid metal processing, and computer-aided design.

Omer Sahin

Mr. Omer Sahin was born in 1988 and works at the Department of Metallurgical and Materials Engineering, Gazi University, Ankara, Turkey. He received his BSc and MSc degrees from the Department of Metallurgical and Materials Engineering, Karadeniz Technical University, in 2015 and 2018, respectively. His research interests include heat treatments of steels and cast irons, materials characterization, and mechanical tests.

Neset Akar

Assoc. Prof. Dr. Neset Akar was born in 1973 and works at the Department of Metallurgical and Materials Engineering, Gazi University, Ankara, Turkey. He graduated from the Department of Metallurgy Education from Gazi University in 1996. He received his MSc and PhD degrees from Gazi University in 2000 and 2006. His research interests include casting technologies, computer-aided casting design, and semi-solid processing of aluminum alloys.

Volkan Kilicli

Assoc. Prof. Dr. Volkan Kilicli was born in 1980 and works at the Department of Metallurgical and Materials Engineering, Gazi University, Ankara, Turkey. He graduated from the Department of Metallurgy Education from Gazi University in 2001. He received his MSc and PhD degrees from Gazi University in 2004 and 2010. His research interests include heat treatments of steels and cast irons, semi-solid processing of aluminum alloys, self-healing metallic materials, and metal matrix composites.

Acknowledgments

The authors would like to thank the Gazi University Department of Metallurgical and Materials Engineering for laboratory facilities.

  1. Research ethics: The authors declare that no AI writing tools were used in this paper. Not applicable.

  2. Author contributions: The authors have accepted responsibility for the entire content of this manuscript and approved its submission. Hudaverdi Bilgen: Experimental studies (wear test, machining of the test samples), creating figures, and paper writing. Omer Sahin: Experimental studies (microstructural characterization and mechanical tests), creating figures, and paper writing. Neset Akar: Experimental studies (thixocasting), paper writing, and editing. Volkan Kilicli: Conceptualization, paper writing, editing, and review.

  3. Competing interests: The authors state no conflict of interest.

  4. Research funding: This study was financially supported by the Devlet Planlama Teskilati (DPT Project Number: 2003K120470-27).

  5. Data availability: The raw data can be obtained on request from the corresponding author.

References

[1] M. C. Flemings, “Behavior of metal alloys in the semisolid state,” Metall. Trans. A, vol. 22, no. 5, pp. 957–981, 1991, https://doi.org/10.1007/BF02661090.Suche in Google Scholar

[2] D. H. Kirkwoood, “Semisolid metal processing,” Int. Mater. Rev., vol. 34, no. 5, pp. 173–189, 1994, https://doi.org/10.1179/imr.1994.39.5.173.Suche in Google Scholar

[3] Z. Fan, “Semisolid metal processing,” Int. Mater. Rev., vol. 47, no. 2, pp. 49–85, 2002, https://doi.org/10.1179/095066001225001076.Suche in Google Scholar

[4] H. V. Atkinson, “Modelling the semisolid processing of metallic alloys,” Prog. Mater. Sci., vol. 50, no. 3, pp. 341–412, 2005, https://doi.org/10.1016/j.pmatsci.2004.04.003.Suche in Google Scholar

[5] S. Nafisi and R. Ghomashchi, “Semi-solid metal processing routes: an overview,” Can. Metall. Q., vol. 44, no. 3, pp. 289–304, 2005, https://doi.org/10.1179/cmq.2005.44.3.289.Suche in Google Scholar

[6] G. Hirt and R. Kopp, Thixoforming: Semi-solid Metal Processing, 1st ed. Weinheim, Germany, Wiley-VCG Verlag GmbH, 2009.10.1002/9783527623969.ch1Suche in Google Scholar

[7] D. H. Kirkwood, M. Suéry, P. Kapranos, H. V. Atkinson, and K. P. Young, Semi-solid Processing of Alloys, 1st ed. Berlin, Germany, Springer, 2010.10.1007/978-3-642-00706-4Suche in Google Scholar

[8] A. Pola, M. Tocci, and P. Kapranos, “Microstructure and properties of semi-solid aluminum alloys: a literature review,” Metals, vol. 8, no. 3, p. 181, 2018, https://doi.org/10.3390/met8030181.Suche in Google Scholar

[9] P. Kapranos, “Current state of semi-solid net-shape die casting,” Metals, vol. 9, no. 12, p. 1301, 2019, https://doi.org/10.3390/met9121301.Suche in Google Scholar

[10] S. X. Ji, K. Wang, and X. X. Dong, “An overview on the process development and the formation of non-dendritic microstructure in semi-solid processing of metallic materials,” Crystals, vol. 12, no. 8, p. 34, 2022, https://doi.org/10.3390/cryst12081044.Suche in Google Scholar

[11] M. F. M. Tajudin, A. H. Ahmad, J. Alias, N. A. Abd Razak, and N. A. Alang, “Grain refinement in semi-solid metal processing: current status and recent development,” Int. J. Adv. Manuf. Technol., vol. 124, nos. 5–6, pp. 1379–1399, 2023, https://doi.org/10.1007/s00170-022-10590-9.Suche in Google Scholar

[12] P. Kapranos, “Current state of semi-solid net-shape die casting,” Metals, vol. 9, no. 12, pp. 1301–1314, 2019, https://doi.org/10.3390/met9121301.Suche in Google Scholar

[13] M. A. Abdelgnei, M. Z. Omar, M. J. Ghazali, and M. N. Mohammed, “Microstructure evaluation and mechanical properties of thixoformed Al–5.7Si–2Cu–0.3Mg aluminum alloys,” Int. J. Metalcast., vol. 16, no. 1, pp. 370–384, 2022, https://doi.org/10.1007/s40962-021-00610-x.Suche in Google Scholar

[14] A. Pola, M. Tocci, and P. Kapranos, “Microstructure and properties of semi-solid aluminum alloys: a literature review,” Metals, vol. 8, no. 3, p. 17, 2018, https://doi.org/10.3390/met8030181.Suche in Google Scholar

[15] V. Kilicli, A. H. Uslu, M. Cifci, and N. Akar, “Metallographic examination of AA7075 alloy produced by rheocasting,” J. Polytech., vol. 20, no. 3, pp. 585–594, 2017, https://doi.org/10.2339/politeknik.339372.Suche in Google Scholar

[16] V. Kilicli, N. Akar, M. Erdogan, and K. Kocatepe, “Tensile fracture behavior of AA7075 alloy produced by thixocasting,” Trans. Nonferrous Metals Soc. China, vol. 26, no. 5, pp. 1222–1231, 2016, https://doi.org/10.1016/s1003-6326(16)64223-1.Suche in Google Scholar

[17] Y. Birol, “Thixoforging experiments with 6082 extrusion feedstock,” J. Alloys Compd., vol. 455, nos. 1–2, pp. 178–185, 2008, https://doi.org/10.1016/j.jallcom.2007.01.053.Suche in Google Scholar

[18] S. Chayong, H. Atkinson, and P. Kapranos, “Thixoforming 7075 aluminium alloys,” Mater. Sci. Eng., A, vol. 390, nos. 1–2, pp. 3–12, 2005, https://doi.org/10.1016/j.msea.2004.05.004.Suche in Google Scholar

[19] H. Atkinson, P. Kapranos, D. Liu, S. Chayong, and D. H. Kirkwood, “Thixoforming of normally wrought aluminium alloys,” Mater. Sci. Forum, vol. 396, pp. 131–136, 2002, https://doi.org/10.4028/www.scientific.net/MSF.396-402.131.Suche in Google Scholar

[20] H. Taneroglu, N. Akar, and V. Kilicli, “Examination of microstructure and mechanical properties of Al2024 alloy produced by thixocasting,” Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 28, no. 4, pp. 803–809, 2013.Suche in Google Scholar

[21] Y. Birol, “Response to T6 heat treatment of extruded and thixoformed EN AW 2014 alloys,” Mater. Sci. Eng., A, vol. 528, nos. 16–17, pp. 5636–5641, 2011, https://doi.org/10.1016/j.msea.2011.03.101.Suche in Google Scholar

[22] M. A. Abdelgnei, M. Z. Omar, M. J. Ghazali, M. A. Gebril, and M. N. Mohammed, “Dry sliding wear behaviour of rheocast Al-5.7Si-2Cu-0.3Mg alloy,” Int. J. Eng. Technol., vol. 7, no. 3.17, pp. 38–42, 2018, https://doi.org/10.14419/ijet.v7i3.17.16620.Suche in Google Scholar

[23] M. A. Abdelgnei, M. Z. Omar, M. J. Ghazali, M. N. Mohammed, and B. Rashid, “Dry sliding wear behaviour of thixoformed Al-5.7Si–2Cu-0.3 Mg alloys at high temperatures using Taguchi method,” Wear, vols. 442–443, no. 1, p. 203134, 2020, https://doi.org/10.1016/j.wear.2019.203134.Suche in Google Scholar

[24] K. S. Alhawari, M. Z. Omar, M. J. Ghazali, M. S. Salleh, and M. N. Abdulrazaq, “Effect of thixoforming on the wear properties of Al-Si-Cu aluminum alloy,” J. Teknol., vol. 79, nos. 5–2, pp. 83–87, 2017, https://doi.org/10.11113/jt.v79.11288.Suche in Google Scholar

[25] K. S. Alhawari, M. Z. Omar, M. J. Ghazali, M. S. Salleh, and M. N. Mohammed, “Evaluation of the microstructure and dry sliding wear behaviour of thixoformed A319 aluminium alloy,” Mater. Des., vol. 76, no. 1, pp. 169–180, 2015, https://doi.org/10.1016/j.matdes.2015.03.057.Suche in Google Scholar

[26] K. S. Alhawari, M. Z. Omar, M. J. Ghazali, M. S. Salleh, and M. N. Mohammed, “Dry sliding wear behaviour of thixoformed hypoeutectic Al–Si–Cu alloy with different amounts of magnesium,” Compos. Interfac., vol. 23, no. 6, pp. 519–531, 2016, https://doi.org/10.1080/09276440.2016.1164496.Suche in Google Scholar

[27] Y. Birol and F. Birol, “Wear properties of thixoformed and high pressure die cast aluminium alloys for connecting rod applications in compressors,” in 10th Esaform Conference on Material Forming, Zaragoza, Spain, AIP Conference Proceedings, 2007, pp. 1167–1172.10.1063/1.2729672Suche in Google Scholar

[28] Y. Birol and F. Birol, “Sliding wear behaviour of thixoformed AlSiCuFe alloys,” Wear, vol. 265, nos. 11–12, pp. 1902–1908, 2008, https://doi.org/10.1016/j.wear.2008.05.001.Suche in Google Scholar

[29] Y. Birol and F. Birol, “Wear properties of high-pressure die cast and thixoformed aluminium alloys for connecting rod applications in compressors,” Wear, vol. 265, nos. 5–6, pp. 590–597, 2008, https://doi.org/10.1016/j.wear.2007.12.004.Suche in Google Scholar

[30] C. M. Chen, C. C. Yang, and C. G. Chao, “Dry sliding wear behaviors of Al–25Si–2.5Cu–1Mg alloys prepared by powder thixocasting,” Mater. Sci. Eng., A, vol. 397, nos. 1–2, pp. 178–189, 2005, https://doi.org/10.1016/j.msea.2005.02.010.Suche in Google Scholar

[31] A. Vencl, I. Bobić, and Z. Mišković, “Effect of thixocasting and heat treatment on the tribological properties of hypoeutectic Al–Si alloy,” Wear, vol. 264, nos. 7–8, pp. 616–623, 2008, https://doi.org/10.1016/j.wear.2007.05.011.Suche in Google Scholar

[32] L. Lasa and J. M. Rodriguez-Ibabe, “Effect of composition and processing route on the wear behaviour of Al–Si alloys,” Scr. Mater., vol. 46, pp. 477–481, 2002, https://doi.org/10.1016/S1359-6462(02)00020-9.Suche in Google Scholar

[33] H. Durmus, R. O. Uzun, S. Şahin, and N. Yüksel, “The effect of the retrogression process on the wear behaviour of a 7075 aluminium alloy,” Mater. Test., vol. 54, no. 5, pp. 330–334, 2012, https://doi.org/10.3139/120.110336.Suche in Google Scholar

[34] S. Ekşi and H. Pehlivan, “Mechanical properties of a 7075-T6 aluminum alloy at elevated temperatures,” Mater. Test., vol. 64, no. 10, pp. 1410–1419, 2022, https://doi.org/10.1515/mt-2022-0072.Suche in Google Scholar

[35] F. Ficici, “Cutting forces during drilling of a SiCp reinforced Al-7075 matrix composite,” Mater. Test., vol. 64, no. 3, pp. 430–445, 2022, https://doi.org/10.1515/mt-2021-2002.Suche in Google Scholar

[36] G. V. Kaliyannan, P. S. Kumar, S. M. Kumar, R. Deivasigamani, and R. Rajasekar, “Mechanical and tribological behavior of SiC and fly ash reinforced Al 7075 composites compared to SAE 65 bronze,” Mater. Test., vol. 60, no. 12, pp. 1225–1231, 2018, https://doi.org/10.3139/120.111272.Suche in Google Scholar

[37] H. Kaya, “Solid particle erosion wear behavior of severe plastically deformed AA7075 alloys,” Mater. Test., vol. 60, no. 9, pp. 885–891, 2018, https://doi.org/10.3139/120.111227.Suche in Google Scholar

[38] F. Vatansever, A. T. Erturk, and E. Feyzullahoglu, “Effect of ultrasonic melt treatment on the tribological behavior of 7075 aluminum alloy,” Mater. Test., vol. 62, no. 12, pp. 1243–1250, 2020, https://doi.org/10.3139/120.111610.Suche in Google Scholar

[39] M. Chegini, A. Fallahi, and M. Shaeri, “Effect of equal channel angular pressing (ECAP) on wear behavior of Al-7075 alloy,” Procedia Materials Science, vol. 11, pp. 95–100, 2015, https://doi.org/10.1016/j.mspro.2015.11.116.Suche in Google Scholar

[40] J. F. Pu, S. Bondarev, H. F. Wang, W. W. Song, S. R. Liu, and D. Jiang, “Analysis of microstructure and wear resistance of friction stir welded joints of 7075-T6 aluminum alloy,” Ferroelectrics, vol. 608, no. 1, pp. 109–123, 2023, https://doi.org/10.1080/00150193.2023.2198449.Suche in Google Scholar

[41] S. Sivaselvan, M. Natarajan, S. R. Devadasan, and N. M. Sivaram, “Influence of friction stir welding parameters on the tribological behavior of dissimilar aluminum alloy joint,” Industrial Lubrication and Tribology, vol. 75, no. 2, pp. 197–203, 2023, https://doi.org/10.1108/ilt-08-2022-0240.Suche in Google Scholar

[42] Z.-Y. Zhou, G.-L. Yu, Q.-Y. Zheng, et al.., “Wear behavior of 7075-aluminum after ultrasonic-assisted surface burnishing,” J. Manuf. Process., vol. 51, no. 1, pp. 1–9, 2020, https://doi.org/10.1016/j.jmapro.2020.01.026.Suche in Google Scholar

[43] H. Nama, I. Esen, H. Ahlatci, and V. Karakurt, “Effect of aging heat treatment on wear behavior and microstructure characterization of newly developed Al7075+Ti alloys,” Materials, vol. 16, no. 12, p. 19, 2023, https://doi.org/10.3390/ma16124413.Suche in Google Scholar PubMed PubMed Central

[44] E. Tan, “Change in the wear characteristics of T6 heat-treated 2024, 6063, and 7075 alloys at different quenching temperatures,” J. Mater. Eng. Perform., vol. 32, no. 11, pp. 5128–5140, 2023, https://doi.org/10.1007/s11665-023-08177-w.Suche in Google Scholar

[45] A. Mavi, Y. Kaplan, and S. Aksoz, “Effects of aging and deep cryogenic treatment on wear behavior of Al7075 Alloy,” J. Tribol., vol. 143, no. 12, p. 121702, 2021, https://doi.org/10.1115/1.4052481.Suche in Google Scholar

[46] M. Ceviz, C. Misirli, and S. S. Karabeyoglu, “An investigation on thermal dry sliding wear performance of wrought AA 7075-T6,” Trans. Indian Inst. Met., vol. 75, no. 9, pp. 2443–2451, 2022, https://doi.org/10.1007/s12666-022-02575-9.Suche in Google Scholar

[47] A. Fakioglu and D. Özyürek, “Effects of re-aging on the fatigue properties of aluminum alloy AA7075,” Mater. Test., vol. 56, nos. 7–8, pp. 575–582, 2014, https://doi.org/10.3139/120.110598.Suche in Google Scholar

[48] A. Kalyon and D. Özyürek, “Investigation of the effect of different heat treatments on wear behavior of AA7075 alloy,” Acta Phys. Pol., A, vol. 131, no. 1, pp. 150–152, 2017, https://doi.org/10.12693/APhysPolA.131.150.Suche in Google Scholar

[49] H. Ay, D. Özyürek, M. Yıldırım, and B. Bostan, “The effects of B₄C amount on hardness and wear behaviours of 7075-B₄C composites produced by powder metallurgy method,” Acta Phys. Pol., A, vol. 129, no. 4, pp. 565–568, 2016, https://doi.org/10.12693/APhysPolA.129.565.Suche in Google Scholar

[50] M. Yıldırım and D. Özyürek, “An Investigation of wear behaviors of AA7075 Al hybrid composites,” High Temp. Mater. Process., vol. 37, no. 7, pp. 619–624, 2018, https://doi.org/10.1515/htmp-2017-0016.Suche in Google Scholar

[51] M. Sambathkumar, R. Gukendran, T. Mohanraj, D. K. Karupannasamy, N. Natarajan, and D. S. Christopher, “A systematic review on the mechanical, tribological, and corrosion properties of Al 7075 metal matrix composites fabricated through stir casting process,” Adv. Mater. Sci. Eng., vol. 2023, no. 1, 2023, Art. no. 5442809, https://doi.org/10.1155/2023/5442809.Suche in Google Scholar

[52] B. S. Sowrabh, B. M. Gurumurthy, Y. M. Shivaprakash, and S. S. Sharma, “Reinforcements, production techniques and property analysis of AA7075 matrix composites-a critical review,” Manuf. Rev., vol. 8, no. 1, p. 37, 2021, https://doi.org/10.1051/mfreview/2021029.Suche in Google Scholar

[53] P. Samal, P. R. Vundavilli, A. Meher, and M. M. Mahapatra, “Recent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties,” J. Manuf. Process., vol. 59, no. 1, pp. 131–152, 2020, https://doi.org/10.1016/j.jmapro.2020.09.010.Suche in Google Scholar

[54] Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, ASTM E-8/8M-22, July 2022 [Online]. Available at: https://www.astm.org/e0008_e0008m-22.html.Suche in Google Scholar

[55] Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM International, ASTM G99-17, January 2017 [Online]. Available at: https://www.astm.org/g0099-17.html.Suche in Google Scholar

[56] M. Warmuzek, “Metallographic techniques for aluminum and its alloys,” in ASM Handbook Metallography and Microstructures, vol. 9, G. F. Vander Voort, Ed., Metals Park, OH, USA, ASM International, 2004, pp. 711–751.10.31399/asm.hb.v09.a0003769Suche in Google Scholar

[57] J. G. Kaufman, Introduction to Aluminum Alloys and Tempers, 1st ed. Metals Park, OH, USA, ASM international, 2000.Suche in Google Scholar

[58] O. Gokhan and A. Karaaslan, “Properties of AA7075 aluminum alloy in aging and retrogression and reaging process,” Trans. Nonferrous Metals Soc. China, vol. 27, no. 11, pp. 2357–2362, 2017, https://doi.org/10.1016/S1003-6326(17)60261-9.Suche in Google Scholar

[59] S. Biswas, “Some mechanisms of tribofilm formation in metal/metal and ceramic/metal sliding interactions,” Wear, vol. 245, nos. 1–2, pp. 178–189, 2000, https://doi.org/10.1016/S0043-1648(00)00477-4.Suche in Google Scholar

[60] S. Lingala, D. Jayne, and F. Ernst, “Effect of lubricant additives on the tribological behavior of aluminum alloy against steel,” Int. J. Mater. Res., vol. 109, no. 9, pp. 789–802, 2018, https://doi.org/10.3139/146.111673.Suche in Google Scholar

[61] Y. Birol and F. Birol, “Wear properties of thixoformed AlSiCuFe alloys,” Int. J. Mater. Form., vol. 1, pp. 981–984, 2008, https://doi.org/10.1007/s12289-008-0222-x.Suche in Google Scholar

[62] S. Lim, “The relevance of wear-mechanism maps to mild-oxidational wear,” Tribol. Int., vol. 35, no. 11, pp. 717–723, 2002, https://doi.org/10.1016/S0301-679X(02)00033-6.Suche in Google Scholar

[63] J. Zhang and A. Alpas, “Transition between mild and severe wear in aluminium alloys,” Acta Mater., vol. 45, no. 2, pp. 513–528, 1997, https://doi.org/10.1016/S1359-6454(96)00191-7.Suche in Google Scholar
Published Online: 2023-11-28
Published in Print: 2024-01-29

© 2023 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Performance of additively manufactured Ti6Al4V ELI finger joints: biomechanical testing and evaluation for arthritis management
  3. Mechanical and microstructural characterization of resistance spot welded dissimilar TWIP1000/TRIP800 joints
  4. Effect of particle size on the properties of avocado pear wood fiber/low-density polyethylene composite enhanced by pretreatment
  5. Design optimization of hybrid material B-pillar under crush loading
  6. Pack-boriding of Sleipner steel: microstructure analysis and kinetics modeling
  7. Structural comparison of conventional and chiral auxetic morphed aircraft rib
  8. Compression behavior of the wood-inspired cellular structure of acrylonitrile butadiene styrene
  9. Adhesive wear behavior and microstructure of FeCr–FeMn–FeB–C coatings
  10. Dry sliding wear behavior of AA7075 alloy produced by thixocasting
  11. Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel
  12. Investigation of the effects of halloysite nanoclay on friction and wear behavior of automotive brake pads
  13. Identifying stir casting process parameters to maximize strength of LM13 with TiB2 and ZrC hybrid metal matrix composite
  14. Effect of gas metal arc and cold metal transfer arc welding processes on microstructure and mechanical properties of AA8011-H18 alloy joints
  15. Anisotropy effects on the tensile properties of AA5052 and AA5052-PVC-AA5052 sandwich sheets
https://doi.org/10.1515/mt-2023-0338
Schlagwörter für diesen Artikel
AA7075 alloy; wear behavior; semi-solid metal processing; thixocasting; T6 heat treatment

Artikel in diesem Heft

  1. Frontmatter
  2. Performance of additively manufactured Ti6Al4V ELI finger joints: biomechanical testing and evaluation for arthritis management
  3. Mechanical and microstructural characterization of resistance spot welded dissimilar TWIP1000/TRIP800 joints
  4. Effect of particle size on the properties of avocado pear wood fiber/low-density polyethylene composite enhanced by pretreatment
  5. Design optimization of hybrid material B-pillar under crush loading
  6. Pack-boriding of Sleipner steel: microstructure analysis and kinetics modeling
  7. Structural comparison of conventional and chiral auxetic morphed aircraft rib
  8. Compression behavior of the wood-inspired cellular structure of acrylonitrile butadiene styrene
  9. Adhesive wear behavior and microstructure of FeCr–FeMn–FeB–C coatings
  10. Dry sliding wear behavior of AA7075 alloy produced by thixocasting
  11. Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel
  12. Investigation of the effects of halloysite nanoclay on friction and wear behavior of automotive brake pads
  13. Identifying stir casting process parameters to maximize strength of LM13 with TiB2 and ZrC hybrid metal matrix composite
  14. Effect of gas metal arc and cold metal transfer arc welding processes on microstructure and mechanical properties of AA8011-H18 alloy joints
  15. Anisotropy effects on the tensile properties of AA5052 and AA5052-PVC-AA5052 sandwich sheets
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 24.10.2025 von https://www.degruyterbrill.com/document/doi/10.1515/mt-2023-0338/html
Button zum nach oben scrollen