Effect of EVA and DCP addition on injection moldability and tensile properties of recycled PE from disposable drip tapes
-
Shoujun Wu
,
Jinlian Liang
Abstract
The effects of ethylene-vinyl acetate copolymer (EVA) and dicumyl peroxide (DCP) addition on injection moldability and tensile properties of recycled polyethylene (PE) from disposable drip tapes were studied. DCP showed an adverse impact on the injection moldability of recycled PE materials, while EVA had positive effects on it. Tensile properties of the reproduced PE increased with the increasing amount of EVA up to 10 wt.% and decreased beyond it. The DCP addition reduced the elastic properties of the reproduced PE, while it enhanced the tensile strength. Overall, the co-addition of 6 wt.% EVA + 0.4 wt.% DCP could improve the tensile strength of the reproduced PE materials.
Funding statement: The authors gratefully acknowledge the support from National Key Technology Research and Development Program of the Ministry of Science and Technology of China (2015BAD22B01-02) and from the Fundamental Research Funds for the Central Universities (QN2013048).
References
[1] L. Wang, Z.Y. Zhao, K. Zhang, C.Y. Tian: Environ. Sci. Technol. 47 (2013) 5518. DOI:10.1080/10426914.2011.60278710.1080/10426914.2011.602787Suche in Google Scholar
[2] H.M. Darouich, C.M.G. Pedras, J.M. Gonçalves, L.S. Pereira: Biosyst. Eng. 112 (2014) 74. DOI:10.1016/j.biosystemseng.2014.03.01010.1016/j.biosystemseng.2014.03.010Suche in Google Scholar
[3] A.M. Alhamdan, I.M. Al-Helal: J. Mater. Process. Technol. 209 (2009) 63. DOI:10.1016/j.jmatprotec.2008.01.05210.1016/j.jmatprotec.2008.01.052Suche in Google Scholar
[4] S.J. Wu, Z.H. Zhang, D.L. Zhu: Appl. Mech. Mater. 350 –370 (2013) 421. DOI:10.4028/www.scientific.net/AMM.357–360.42110.4028/www.scientific.net/AMM.357–360.421Suche in Google Scholar
[5] D.L. Zhu, S.J. Wu, B. Guo: Plast. Rubbber Compos. 47 (2018) 133. DOI:10.1080/14658011.2018.144387410.1080/14658011.2018.1443874Suche in Google Scholar
[6] G. Ayoub, F. Zaïri, C. Fréderix, J.M. Gloaguen, M. Naït-Abdelaziz, R. Seguela, J.M. Lefebvre: Int. J. Plast. 27 (2011) 492. DOI:10.1016/j.ijplas.2010.07.00510.1016/j.ijplas.2010.07.005Suche in Google Scholar
[7] J.J. Cheng, M.A. Polak, A. Penlidis: J. Macromol. Sci., Pure Appl. Chem. 46 (2009) 572. DOI:10.1080/1060132090285180110.1080/10601320902851801Suche in Google Scholar
[8] A.A. Mendes, A.M. Cunha, C.A. Bernardo: Polym. Degrad. Stab. 96 (2011) 1125. DOI:10.1016/j.polymdegradstab.2011.02.01510.1016/j.polymdegradstab.2011.02.015Suche in Google Scholar
[9] A. Viksne, L. Malers, A.K. Bledzki: Angew. Makromol. Chem. 249 (1997) 47. DOI:10.1002/apmc.1997.05249010410.1002/apmc.1997.052490104Suche in Google Scholar
[10] H.A. Khonakdar, S.H. Jafari, A. Haghighi-Asl, U. Wagenknecht, L. Häussler, U. Reuter: J. Appl. Polym. Sci. 103 (2007) 3261. DOI:10.1002/app.2526810.1002/app.25268Suche in Google Scholar
[11] M. Faker, M.K.R. Aghjeh, M. Ghaffari, S.A. Seyyedi: Eur. Polym. J. 44 (2008) 1834. DOI:10.1016/j.eurpolymj.2008.04.00210.1016/j.eurpolymj.2008.04.002Suche in Google Scholar
[12] A.J. Zattera, O. Bianchi, R.V.B. Oliveira, L.B. Canto, C.A. Ferreira, M. Zeni: Prog. Rubber. Plast. Re. 22 (2006) 69. DOI:10.1177/14777606060220020110.1177/147776060602200201Suche in Google Scholar
[13] L. Mészáros, T. Tábi, J.G. Kovács, T. Bárány: Polym. Eng. Sci. 48 (2008) 868. DOI:10.1002/pen.2102210.1002/pen.21022Suche in Google Scholar
[14] G. Takidis, D.N. Bikiaris, G.Z. Papageorgiou, D.S. Achilias, I. Sideridou: J. Apply. Polym. Sci. 90 (2003) 841. DOI:10.1002/app.1266310.1002/app.12663Suche in Google Scholar
[15] Y. Chen, H.W. Zou, M. Liang, Y. Cao: Thermochim. Acta. 586 (2014) 1. DOI:10.1016/j.tca.2014.04.00710.1016/j.tca.2014.04.007Suche in Google Scholar
[16] K.A. Moly, S.S. Bhagawan, S. Thomas: Mater. Lett. 53 (2004) 346. DOI:10.1016/S0167-577X(01)00505-510.1016/S0167-577X(01)00505-5Suche in Google Scholar
[17] K.A. Moly, H.J. Radusch, R. Androsh, S.S. Bhagawan, S. Thomas: Eur. Polym. J. 41 (2005) 410. DOI:10.1016/j.eurpolymj.2004.10.01610.1016/j.eurpolymj.2004.10.016Suche in Google Scholar
[18] T. Yamazaki, T. Seguchiz: J. Polym. Sci. A Polym. Chem. 35 (1997) 279. DOI:10.1002/(SICI)1099-0518(19970130)35 : 2<279::AID-POLA10>3.0.CO;2-M10.1002/(SICI)1099-0518(19970130)35:2<279::AID-POLA10>3.0.CO;2-MSuche in Google Scholar
[19] V.D. Ramos, H.M. da Costa, A.O. Pereira, M.C.G. Rocha, A.D.S. Gomes: Polym. Test. 23 (2004) 949. DOI:10.1016/j.polymertesting.2004.04.01210.1016/j.polymertesting.2004.04.012Suche in Google Scholar
© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany
Artikel in diesem Heft
- Contents
- Hot working behaviour and processing maps of duplex cast steel
- Residual stress and simulation of 304–430 stainless steel dissimilar laser-welded joints incorporating materials heterogeneity
- Microstructure and mechanical properties of AlCrFeCoNi high-entropy alloy particle reinforced Mg-9Al-1Zn matrix composites
- Microstructure and elevated temperature mechanical properties of Mg-6Gd-3Y-0.5Zr alloy cast by PEP–SET sand mold
- Properties of aluminum metal matrix composites manufactured by selective laser melting
- Energy absorption characteristics of circular-celled honeycombs under in-plane quasi-static compressive loadings
- Effect of hydrogen, and vapors of water and organic compounds on the structure of Sr2CuO3
- Self – aligned mesoporous titania nanotubes – reduced graphene oxide hybrid surface: A potential scaffold for osteogenesis
- Effect of EVA and DCP addition on injection moldability and tensile properties of recycled PE from disposable drip tapes
- Notifications
- Deutsche Gesellschaft für Materialkunde / German Materials Science Society
Artikel in diesem Heft
- Contents
- Hot working behaviour and processing maps of duplex cast steel
- Residual stress and simulation of 304–430 stainless steel dissimilar laser-welded joints incorporating materials heterogeneity
- Microstructure and mechanical properties of AlCrFeCoNi high-entropy alloy particle reinforced Mg-9Al-1Zn matrix composites
- Microstructure and elevated temperature mechanical properties of Mg-6Gd-3Y-0.5Zr alloy cast by PEP–SET sand mold
- Properties of aluminum metal matrix composites manufactured by selective laser melting
- Energy absorption characteristics of circular-celled honeycombs under in-plane quasi-static compressive loadings
- Effect of hydrogen, and vapors of water and organic compounds on the structure of Sr2CuO3
- Self – aligned mesoporous titania nanotubes – reduced graphene oxide hybrid surface: A potential scaffold for osteogenesis
- Effect of EVA and DCP addition on injection moldability and tensile properties of recycled PE from disposable drip tapes
- Notifications
- Deutsche Gesellschaft für Materialkunde / German Materials Science Society
