Microstructure and mechanical properties of AlCrFeCoNi high-entropy alloy particle reinforced Mg-9Al-1Zn matrix composites
-
Yongsheng Chen
,
Maoliang Hu
Abstract
AlCrFeCoNi particles were added to Mg-9Al-1Zn alloy in a rotary blowing process. The microstructures and mechanical properties of Mg-9Al-1Zn based composites were characterized by means of X-ray diffraction, optical microscopy, scanning electron microscopy, transmission electron microscopy, and tensile and compression tests at room temperature. Results revealed that AlCrFeCoNi particles could effectively refine the grains, and the rotary blowing process enabled the uniform distribution of these particles. The mechanical properties of composites improved with the increase of particle volume fraction. The superior wettability of AlCrFeCoNi particles supported their reliable bonding with the Mg-9Al-1Zn matrix. The Hall–Petch strengthening and stress transfer effect played a dominant role in the improvement of compressive and tensile properties.
Funding statement: The authors gratefully acknowledge the financial support by the National Natural Science Foundation of China (No. 51574100)
References
[1] J.H. Zhang, S.J. Liu, R.Z. Wu, L.G. Hou, M.L. Zhang: J. Magnesium Alloys 277 (2018) 6. DOI:10.1016/j.jma.2018.08.00110.1016/j.jma.2018.08.001Search in Google Scholar
[2] Z. Yang, H.Y Xu, Y. Wang, M.L Hu, Z.S Ji: Results Phys. 888 (2019) 12. DOI:10.1016/j.rinp.2018.12.03910.1016/j.rinp.2018.12.039Search in Google Scholar
[3] MaIdar, L.Y. Wang, G.M. Zhu, X.Q. Zeng: J. Magnesium Alloys 210 (2020) 1. DOI:10.1016/j.jma.2019.07.00910.1016/j.jma.2019.07.009Search in Google Scholar
[4] S.B. Li, X.Y. Yang, J.T. Hou, W.B. Du: J. Magnesium Alloys 78 (2020) 1. DOI:10.1016/j.jma.2019.08.00210.1016/j.jma.2019.08.002Search in Google Scholar
[5] J.H. Wang, L. Xu, R.Z. Wu, J. Feng, J.H. Zhang, L.G. Hou, M.L. Zhan: Acta Metall. Sin. (Engl. Lett.). 3 (2020). DOI:10.1007/s40195-020-01017-z10.1007/s40195-020-01017-zSearch in Google Scholar
[6] C.F. Zhang, T.Y. Fan, W. Cao, J. Ding, D. Zhang: Compos. Sci. Technol. 2688 (2009) 69. DOI:10.1016/j.compscitech.2009.08.01110.1016/j.compscitech.2009.08.011Search in Google Scholar
[7] X.L. Yang, F. Wang, Z.Y. Fan: J. Magnesium Alloys 246 (2017) 2. DOI:10.1016/j.jallcom.2017.02.24610.1016/j.jallcom.2017.02.246Search in Google Scholar
[8] K.K. Deng, C.J. Wang, K.B. Nie, X.J. Wang: Acta Metall. Sin. (Engl. Lett.). 413 (2019) 32. DOI:10.1007/s40195-019-00872-910.1007/s40195-019-00872-9Search in Google Scholar
[9] Z.W. Wang, Y.B. Yuan, R.X. Zheng, K. Ameyama, C.L. Ma: Trans. Nonferrous Met. Soc. China. 2366 (2014) 24. DOI:10.1016/S1003-6326(14)63358-610.1016/S1003-6326(14)63358-6Search in Google Scholar
[10] G.H. Meng, T.M. Yue, X. Lin, H.O. Yang, H. Xie, X. Ding: Optics Laser Technol. 119 (2015) 70. DOI:10.1016/j.optlastec.2015.02.00110.1016/j.optlastec.2015.02.001Search in Google Scholar
[11] Q.L. Li, S. Zhao, B.Q. Li, Y.Q. Zhu, C.Z. Wang, Y.F. Lan, T.D. Xia: Mater. Lett. 156 (2019) 251. DOI:10.1016/j.matlet.2019.05.05010.1016/j.matlet.2019.05.050Search in Google Scholar
[12] Z.W. Wang, R.X. Zheng, C.L. Ma, Y. Han: J. Harbin Ins. Tech-nol. 119 (2013) 5. DOI:10.3969/j.issn.1005-9113.2013.05.02110.3969/j.issn.1005-9113.2013.05.021Search in Google Scholar
[13] T.A. Listyawan, H. Lee, N. Park, U. Lee: J. Mater. Sci. Technol. 2985 (2016) 25. DOI:10.1016/j.jmst.2020.02.08310.1016/j.jmst.2020.02.083Search in Google Scholar
[14] K.P. Kumar, M.G. Krishna, J.B. Rao, N.R.M.R. Bhargava: J Alloys Compd. 421 (2015) 640. DOI:10.1016/j.jallcom.2015.03.09310.1016/j.jallcom.2015.03.093Search in Google Scholar
[15] D.Z. Zhu, X. Ding, L.F. Qi, Q. Chen: Rare Met. Mater. Eng. 3400 (2017) 11. DOI:CNKI:SUN:COSE.0.2017–11–040.Search in Google Scholar
[16] C. Jian, P.Y. Niu, T. Wei, L. Hao, Y.Z. Liu, X.H. Wang, Y.L. Peng: J. Alloys Compd. 630 (2015) 649. DOI:10.1016/j.jallcom.2015.07.12510.1016/j.jallcom.2015.07.125Search in Google Scholar
[17] G.L. Gao, M. Wang, D.Q. Shi, Y.F. Kang: Metall. Mater. Trans. B. 1997 (2019) 4. DOI:10.1007/s11663-019-01607-y10.1007/s11663-019-01607-ySearch in Google Scholar
[18] H.Y. Ma, J.S. Yang: Metal. Mater. Metall. Eng. 34 (2018) 3. DOI: CNKI:SUN:HNYI.0.2018–03–007.Search in Google Scholar
[19] W.B. Yu, X.J. Wang, H.B. Zhao, C. Ding, Z.Y. Huang, H.X. Zhai, Z.p. Guo, S.m. Xiong: J. Alloys Compd. 199 (2017) 702. DOI:10.1016/j.jallcom.2017.01.23110.1016/j.jallcom.2017.01.231Search in Google Scholar
[20] Y.S. Yi, Y. Meng, D.Q. Li, S. Sugiyama, J. Yanagimoto: J. Mater. Sci. Technol. 1149 (2018) 7. DOI:10.1016/j.jmst.2017.11.04410.1016/j.jmst.2017.11.044Search in Google Scholar
[21] X.M. Wang, X.J. Wang, X.S. Hu, K. Wu, M.Y. Zheng: Acta Me-tall. Sin. (Engl. Lett.). 940 (2016) 10. DOI:10.1007/s40195-016-0473-310.1007/s40195-016-0473-3Search in Google Scholar
[22] S.G. Ma, Y. Zhang: Mater. Sci. Eng. A 480 (2012) 532. DOI:10.1016/j.msea.2011.10.11010.1016/j.msea.2011.10.110Search in Google Scholar
[23] P. Xiao, Y.M. Gao, F.X. Xu, S.S. Yang, B. Li, Y.F. Li, Z.F. Huang, Q.L Zheng: J. Alloys Compd. 237 (2019) 780. DOI:10.1016/j.jallcom.2018.11.25310.1016/j.jallcom.2018.11.253Search in Google Scholar
[24] Y.H. Zhang, L.L. Yan, M.H. Miao, Q.W. Wang, G.H. Wu: Mater. Des. 872 (2015) 86. DOI:10.1016/j.matdes.2015.08.01510.1016/j.matdes.2015.08.015Search in Google Scholar
[25] Q. Zhang, B. Liu, Z.Y. Niu, Z.W. Zhang, Z. Leng: Mater. Sci. Eng. A 152 (2014) 619. DOI:10.1016/j.msea.2014.09.07610.1016/j.msea.2014.09.076Search in Google Scholar
[26] G. Li, M. Li, H.X. Wang, Z.Y. Zhang, W.L. Cheng, W. Liang, C.J. Zhang: J. Mater. 20 (2018). DOI:10.1557/jmr.2018.18210.1557/jmr.2018.182Search in Google Scholar
[27] L.Y. Chen, J.Q. Xu, H. Choi, M. Pozuelo, X.L. Ma, S. Bhowmick, J.M. Yang, S. Mathaudhu, X.C. Li: Nature 539 (2015) 528. PMid:26701055; DOI:10.1038/nature1644510.1038/nature16445Search in Google Scholar PubMed
[28] Z. Zhang, D.L. Chen: Scr. Mater. 1321 (2006) 547. DOI:10.1016/j.scriptamat.2005.12.01710.1016/j.scriptamat.2005.12.017Search in Google Scholar
[29] B.L. Bramfitt: Metall. Trans. B 1987 (1970) 1. DOI:10.1007/BF0264279910.1007/BF02642799Search in Google Scholar
© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany
Articles in the same Issue
- Contents
- Hot working behaviour and processing maps of duplex cast steel
- Residual stress and simulation of 304–430 stainless steel dissimilar laser-welded joints incorporating materials heterogeneity
- Microstructure and mechanical properties of AlCrFeCoNi high-entropy alloy particle reinforced Mg-9Al-1Zn matrix composites
- Microstructure and elevated temperature mechanical properties of Mg-6Gd-3Y-0.5Zr alloy cast by PEP–SET sand mold
- Properties of aluminum metal matrix composites manufactured by selective laser melting
- Energy absorption characteristics of circular-celled honeycombs under in-plane quasi-static compressive loadings
- Effect of hydrogen, and vapors of water and organic compounds on the structure of Sr2CuO3
- Self – aligned mesoporous titania nanotubes – reduced graphene oxide hybrid surface: A potential scaffold for osteogenesis
- Effect of EVA and DCP addition on injection moldability and tensile properties of recycled PE from disposable drip tapes
- Notifications
- Deutsche Gesellschaft für Materialkunde / German Materials Science Society
Articles in the same Issue
- Contents
- Hot working behaviour and processing maps of duplex cast steel
- Residual stress and simulation of 304–430 stainless steel dissimilar laser-welded joints incorporating materials heterogeneity
- Microstructure and mechanical properties of AlCrFeCoNi high-entropy alloy particle reinforced Mg-9Al-1Zn matrix composites
- Microstructure and elevated temperature mechanical properties of Mg-6Gd-3Y-0.5Zr alloy cast by PEP–SET sand mold
- Properties of aluminum metal matrix composites manufactured by selective laser melting
- Energy absorption characteristics of circular-celled honeycombs under in-plane quasi-static compressive loadings
- Effect of hydrogen, and vapors of water and organic compounds on the structure of Sr2CuO3
- Self – aligned mesoporous titania nanotubes – reduced graphene oxide hybrid surface: A potential scaffold for osteogenesis
- Effect of EVA and DCP addition on injection moldability and tensile properties of recycled PE from disposable drip tapes
- Notifications
- Deutsche Gesellschaft für Materialkunde / German Materials Science Society
