Volume 13, Issue 23

Structured beams carrying orbital angular momentum (OAM) provide powerful capabilities for applications in optical tweezers, super-resolution imaging, quantum optics, and ad-vanced microparticle manipulation. However, it is challenging for generate and control the OAM beams at the extreme ultraviolet (EUV) region due to the lack of suitable wave front shaping optics arise from being limited to the strong absorption of most materials. Here, we use a modified Fermat-spiral photon-sieve splitter to simultaneously generate two focused doughnut beams with opposite helical phase. Our technique enables us to produce splitting focused vortex beams with different rotation directions at EUV wavelengths. Additionally, we provide experimental evidence showcasing the capabilities of our method and further detect the helical phase by self-reference interferometry. This work not only opens a route for OAM-driven applications in EUV radiation, but also paves the way to studies of holographic technique by EUV splitter.

Emerging miniaturized atomic sensors such as optically pumped magnetometers (OPMs) have attracted widespread interest due to their application in high-spatial-resolution biomagnetism imaging. While optical probing systems in conventional OPMs require bulk optical devices including linear polarizers and lenses for polarization conversion and wavefront shaping, which are challenging for chip-scale integration. In this study, an integrated optical probing scheme based on localized-interference metasurface for chip-scale OPM is developed. Our monolithic metasurface allows tailorable linear polarization conversion and wavefront manipulation. Two silicon-based metasurfaces namely meta-polarizer and meta-polarizer-lens are fabricated and characterized, with maximum transmission efficiency and extinction ratio (ER) of 86.29 % and 14.2 dB for the meta-polarizer as well as focusing efficiency and ER of 72.79 % and 6.4 dB for the meta-polarizer-lens, respectively. A miniaturized vapor cell with 4 × 4 × 4 mm 3 dimension containing 87 Rb and N 2 is combined with the meta-polarizer to construct a compact zero-field resonance OPM for proof of concept. The sensitivity of this sensor reaches approximately 9 fT/Hz 1/2 with a dynamic range near zero magnetic field of about ±2.3 nT. This study provides a promising solution for chip-scale optical probing, which holds potential for the development of chip-integrated OPMs as well as other advanced atomic devices where the integration of optical probing system is expected.

Optical interconnects, leveraging surface plasmon modes, are revolutionizing high-performance computing and AI, overcoming the limitations of electrical interconnects in speed, energy efficiency, and miniaturization. These nanoscale photonic circuits integrate on-chip light manipulation and signal conversion, marking significant advancements in optoelectronics and data processing efficiency. Here, we present a novel plasmonic interconnect circuit, by introducing refractive index matching layer, the device supports both pure SPP and different hybrid modes, allowing selective excitation and transmission based on light wavelength and polarization, followed by photocurrent conversion. We optimized the coupling gratings to fine-tune transmission modes around specific near-infrared wavelengths for effective electrical detection. Simulation results align with experimental data, confirming the device’s ability to detect complex optical modes. This advancement broadens the applications of plasmonic interconnects in high-speed, compact optoelectronic and sensor technologies, enabling more versatile nanoscale optical signal processing and transmission.

Atomic magnetometers (AMs) that use alkali vapors, such as rubidium, are among the most sensitive sensors for magnetic field measurement. They commonly use polarization differential detection to mitigate common-mode noise. Nevertheless, traditional differential detection optics, including polarization beam splitters (PBS) and half-wave plates, are typically bulky and large, which restricts further reductions in sensor dimensions. In this study, a combination of liquid crystal polarization grating (LCPG) and liquid crystal quarter-wave plate is used for differential detection in AMs, with magnetic field strength determined by measuring the intensity of two diffracted beams from the LCPG. The experimental findings indicate that the fabricated LCPG exhibits a circularly polarized extinction ratio of 3,656 and achieves an average diffraction efficiency of 99 %. In addition, the differential detection method based on LCPG can achieve an angular resolution of 1.48 × 10 −7  rad. Subsequently, the method is employed in an AM to achieve an average magnetic sensitivity of 13.8 fT/Hz 1/2 . Compared to the PBS-based differential detection method, this method enhances the magnetometer response coefficient by 13 % and achieves co-side distribution of the two diffracted beams, thereby avoiding the need for additional vertical optical paths. The effective thickness of the detection optics is reduced to the micrometer scale, allowing for future integration as thin films onto microfabricated vapor cells. This study offers a practical solution for miniaturized AMs with exceptionally high sensitivity.

Owing to its topological properties and band collapse, Floquet helical photonic lattices have gained increasing attention as a purely classical setting to realize the optical analogues of a wide variety of quantum phenomena. We demonstrate both theoretically and numerically that light propagation in an appropriately designed helical superlattice can exhibit spatial photonic Zitterbewegung effect, i.e., a quiver spatial oscillatory motion of the beam center of mass around its mean trajectory, in both one- and two-dimensional cases. The lattice spacing determines the effective coupling strength between adjacent helical waveguides, and further drastically not only affects the oscillation amplitude and frequency, but also invert their direction of drift when the effective coupling strength is tuned from positive to negative. Complete arrest and inversion of the drift direction of Zitterbewegung effect are reported.

Chiral optical forces exhibit opposite signs for the two enantiomeric versions of a chiral molecule or particle. If large enough, these forces might be able to separate enantiomers all optically, which would find numerous applications in different fields, from pharmacology to chemistry. Longitudinal chiral forces are especially promising for tackling the challenging scenario of separating particles of realistically small chiralities. In this work, we study the longitudinal chiral forces arising in dielectric integrated waveguides when the quasi-TE and quasi-TM modes are combined as well as their application to separate absorbing and non-absorbing chiral particles. We show that chiral gradient forces dominate in the scenario of beating of non-denegerate TE and TM modes when considering non-absorbing particles. For absorbing particles, the superposition of degenerate TE and TM modes can lead to chiral forces that are kept along the whole waveguide length. We accompany the calculations of the forces with particle tracking simulations for specific radii and chirality parameters. We show that longitudinal forces can separate non-absorbing chiral nanoparticles in water even for relatively low values of the particle chirality and absorbing particles with arbitrarily low values of chirality can be effectively separated after enough interaction time.

In view of the recent increased interest in light-induced manipulation of magnetism in nanometric length scales this work presents metal clusters as promising elementary units for generating all-optical ultrafast magnetization. We perform a theoretical study of the opto-magnetic properties of metal clusters through ab-initio real-time (RT) simulations in real-space using time-dependent density functional theory (TDDFT). Through ab-initio calculations of plasmon excitation with circularly polarized laser pulse in atomically precise clusters of simple and noble metals, we discuss the generation of orbital magnetic moments due to the transfer of angular momentum from light field through optical absorption at resonance energies. Notably, in the near-field analysis we observe self-sustained circular motion of the induced electron density corroborating the presence of nanometric current loops which give rise to orbital magnetic moments due to the inverse Faraday effect (IFE) in the clusters. The results provide valuable insights into the quantum many-body effects that influence the IFE-mediated light-induced orbital magnetism in metal clusters depending on its geometry and chemical composition. At the same time, they explicitly demonstrate the possibility for harnessing magnetization in metal clusters, offering potential applications in the field of all-optical manipulation of magnetism.

As a noninvasive and label-free optical technique, Raman spectroscopy offers significant advantages in studying the structure and properties of biomacromolecules, as well as real-time changes in cellular molecular structure. However, its practical applications are hindered by weak scattering responses, low signal intensity, and poor spectral uniformity, which affect the subsequent accuracy of spectral analysis. To address these issues, we report a novel surface-enhanced Raman scattering (SERS) substrate based on a pyramidal pitted silicon (PPSi) array structure adhered with Au-shell Ag-core nanospheres (Au@Ag NSs). By preparing a highly uniform PPSi array substrate with controllable size and arrangement, and constructing SERS-active Au@Ag NSs on this substrate, a three-dimensional (3D) composite SERS substrate is realized. The enhancement performance and spectral uniformity of 3D composite SERS substrate were examined using crystal violet (CV) and Rhodamine 6G (R6G) molecules, achieving a minimum detectable concentration of R6G at 10 −9  M and the analytical enhancement factor (AEF) of 4.2 × 10 8 . Moreover, SERS detection of biological samples with varying concentrations of Staphylococcus aureus demonstrated excellent biocompatibility of the SERS substrate and enabled quantitative analysis of bacterial concentration ( R 2 = 99.7 %). Theoretical simulations using finite-difference time-domain (FDTD) analysis were conducted to examine the electromagnetic field distribution of the three-dimensional SERS composite substrate, confirming its local electric field enhancement effect. These experimental and theoretical results indicate that the Au@Ag NSs/PPSi substrate with a regulable pyramidal pitted array is a promising candidate for sensitive, label-free SERS detection in medical and biotechnological applications.

Non-local metasurface supporting geometric phases at bound states in the continuum (BIC) simultaneously enables sharp spectral resonances and spatial wavefront shaping, thus providing a diversified optical platform for multifunctional devices. However, a static nonlocal metasurface cannot manipulate multiple degrees of freedom (DOFs), making it difficult to achieve multifunctional integration and be applied in different scenarios. Here, we presented and demonstrated phase-change non-local metasurfaces that can realize dynamic manipulation of multiple DOFs including resonant frequency, Q values, band, and spatial wavefront. Accordingly, a metasurface integrating multiple distinct functions is designed, as a proof-of-concept demonstration. Utilizing the geometry phase of quasi-BIC and the tunability of vanadium dioxide (VO 2 ), a dynamic meta-lens is achieved by tailoring spatial light response at quasi-BIC in the temperature range from room temperature to 53 °C. Simultaneously, the sharp Fano resonance of quasi-BIC enables the metasurface to serve as an optical sensor in the mid-infrared band, yielding a sensitivity of 7.96 THz/RIU at room temperature. Furthermore, at the metallic state of VO 2 (80 °C), the designed metasurface converts into a mid-infrared broadband absorber, achieving higher than 80 % absorptivity and an average absorption of 90 % from 28.62 THz to 37.56 THz. The proposed metasurface enabling multifunctional performances in different temperatures can effectively improve the availability of devices and find more new and complex scenarios in sensing, imaging, and communications.

The technological requirements of low-power and high-fidelity color displays have been instrumental in driving research into advanced coloration technologies. At the forefront of these developments is the implementation of dye-free approaches, which overcome previous constraints related to color resolution and fading. Resonant dielectric nanostructures have emerged as a promising paradigm, showing great potential for high efficiency, high color saturation, wide gamut palette, and image reproduction. However, they still face limitations related to color accuracy, purity, and simultaneous brightness tunability. Here, we demonstrate an all-dielectric metasurface empowered by photonic bound states in the continuum (BICs), which supports sharp resonances throughout the visible spectral range, ideally suited for producing a wide range of structural colors. The metasurface design consists of TiO 2 ellipses with carefully controlled sizes and geometrical asymmetry, allowing versatile and on-demand variation of the brightness and hue of the output colors, respectively.

Metasurfaces, consisting of arrays of subwavelength structures, are lightweight and compact while being capable of implementing the functions of traditional bulky optical components. Furthermore, they have the potential to significantly improve complex optical systems in terms of space and cost, as they can simultaneously implement multiple functions. The wafer-scale mass production method based on the CMOS (complementary metal oxide semiconductor) process plays a crucial role in the modern semiconductor industry. This approach can also be applied to the production of metasurfaces, thereby accelerating the entry of metasurfaces into industrial applications. In this study, we demonstrated the mass production of large-area meta -axicons with a diameter of 2 mm on an 8-inch wafer using DUV (Deep Ultraviolet) photolithography. The proposed meta -axicon designed here is based on PB (Pancharatnam–Berry) phase and is engineered to simultaneously modulate the phase and polarization of light. In practice, the fabricated meta -axicon generated a circularly polarized Bessel beam with a depth of focus (DoF) of approximately 2.3 mm in the vicinity of 980 nm. We anticipate that the mass production of large-area meta -axicons on this CMOS platform can offer various advantages in optical communication, laser drilling, optical trapping, and tweezing applications.

Beam-steered infrared (IR) light communication has gained tremendous attention as one of the solutions of congested wireless communication traffic. High performance active beam-steering devices play a crucial role in data allocation and exchange. Conventional beam-steering devices such as spatial light modulator (SLM) and micro-electrical mechanical system (MEMS) mirror and the current emerging nonmechanical beam-steering metasurface-based devices are challenging to realize a large tunable steering angle beyond several degrees, which significantly hinders the spatial application of optical wireless communications (OWC). Herein, an angle-magnified liquid crystal (LC) metadevice consisting of LC metasurfaces and a liquid crystal on silicon (LCoS) is proposed to realize active beam steering with a tunable large field of view (FOV). Based on the angle-magnified tunable LC metadevice, an intelligent bidirectional high-speed OWC system is experimentally demonstrated, achieving an actively enlarged FOV of 20° × 20°, with a data rate of 200 Gbps over the S/C/L band for both uplink and downlink transmission over a propagation distance of 1.5 m in free space. The proposed OWC system opens a new avenue for the future high performance wireless data transmission.