Volume 13, Issue 19

Single-photon emitters (SPEs) hold the key to many quantum technologies including quantum computing. In particular, developing a scalable array of identical SPEs can play an important role in preparing single photons – crucial resources for computation – at a high rate, allowing to improve the computational capacity. Recently, different types of SPEs have been found in various 2D materials. Towards realizing scalable SPE arrays in 2D materials for quantum computation, it is required to develop tunable SPEs that can produce identical photons by precisely controlling emission properties. Here, we present a brief review of the recent progress on various tuning methods in different 2D materials. Firstly, we discuss the operation principle of different 2D SPEs along with their unique characteristics. Secondly, we introduce various dynamic strain engineering methods for tuning the emission wavelengths in 2D SPEs. We also present several electric field-induced wavelength tuning methods for 2D SPEs. Lastly, we discuss the outlook of dynamically tunable 2D SPEs towards scalable 2D SPE arrays for realizing practical quantum photonics applications.

In this paper, we design a multimodal visible/near-infrared photoacoustic microscopy and optical coherence tomography (VIS/NIR-PAM-OCT) system for imaging both retina and retinal pigment epithelium (RPE)/choroid complex layer. F127 and DSPE-PEG-cRGD encapsulated IR-1048 nanoparticles (FINPs) exhibiting absorption peak up to 1,064 nm were utilized as contrast agents to enhance NIR-PAM for in vivo imaging of fundus tissues. The fundus structure and vessels are clearly visualized by the multimodal imaging, and their parameters were quantitatively analyzed. NIR-PAM and OCT imaging of fundus were time-serially monitored over 60 min following the intravenous injection of FINPs into rats. The results indicated a 134 % increase in image signals in PAM at 1 min, along with an 8.23 % intensity enhancement in OCT. Moreover, laser-induced choroidal neovascularization (CNV) was specifically detected and accurately quantified using VIS/NIR-PAM-OCT. Lastly, FINPs demonstrated excellent biocompatibility in hematology analysis and pathology testing.

Precisely pinpointing the positions of emitters within the diffraction limit is crucial for quantitative analysis or molecular mechanism investigation in biomedical research but has remained challenging unless exploiting single molecule localization microscopy (SMLM). Via integrating experimental spot dataset with deep learning, we develop a new approach, Digital-SMLM, to accurately predict emitter numbers and positions for sub-diffraction-limit spots with an accuracy of up to 98 % and a root mean square error as low as 14 nm. Digital-SMLM can accurately resolve two emitters at a close distance, e.g. 30 nm. Digital-SMLM outperforms Deep-STORM in predicting emitter numbers and positions for sub-diffraction-limited spots and recovering the ground truth distribution of molecules of interest. We have validated the generalization capability of Digital-SMLM using independent experimental data. Furthermore, Digital-SMLM complements SMLM by providing more accurate event number and precise emitter positions, enabling SMLM to closely approximate the natural state of high-density cellular structures.

Different types of devices with modulable resistance are attractive for the significant potential applications such as sensors, information storage, computation, etc. Although extensive research has been reported on resistance effects, there is still a need for exploring new mechanisms that offer advantages of low power consumption, high sensitivity, and long-term stability. Here, we report a graphene–Si based spatial-dependence photo-rheostat (SDPR), which enables bipolar resistance modulation in the range of 5 mm with a resistance sensitivity exceeding 1,000 Ω/mm at operating wavelengths from visible to near infrared band (1,550 nm). Especially, at ultra-low energy consumption, the device can achieve modulation of even 5 orders of magnitude of resistance and response speed up to 10 kHz. A theoretical model based on carrier dynamics is established to reveal the diffusion and drift of carriers as a mechanism explaining such experimental phenomenon. This work provides a new avenue to modulate resistance at low power consumption as novel opto-potentiometers in various photoelectric applications.

Efforts to increase the number of filters are driven by the demand for miniaturized spectrometers and multispectral imaging. However, processes that rely on sequential fabrication of each filter are cost ineffective. Herein, we introduce an approach to produce at least 16 distinct filters based on a single low-resolution lithographic step with minimum feature size of 0.6 μm. Distinct from grayscale lithography, we employ standard binary lithography but achieve height variations in polymeric resist through a post-development reflow process. The resulting transparent polymeric films were incorporated in Fabry–Perot cavity structures with cavity thickness ranging from 90 to 230 nm to produce transmittance across the visible spectrum. This binary lithography and reflow (BLR) process demonstrates control of the dielectric layer thickness down to ∼15 nm. This new process provides a cost-effective alternative to traditional techniques in fabricating microscopic transmission filters, and other applications where precise thickness variation across the substrate is required.

Circularly polarized light emitting active materials are of great interest, and the convenient tuning of the circularly polarized luminescence (CPL) remains a significant challenge. Integrating fluorescent materials into chiral photonic crystals to achieve tunable CPL is a promising approach, allowing efficient manipulation of CPL by adjusting the photonic band gap (PBG). We combined carbon quantum dots (CQDs) with hydroxypropyl cellulose (HPC), which self-assembles into a cholesteric liquid crystal (CLC). The helical structure can selectively reflect right circularly polarized (RCP) light, achieving strong circular dichroism (CD) and high CPL dissymmetry factor g lum . In addition, the chiral template is thermo-responsive. The CPL wavelength can be adjusted by regulating the PBG position through temperature adjustment, while the chirality of CPL keeps high especially in the heating process. This work enables stimuli-responsive manipulation of CPL under one template through temperature regulation, which may open up enormous possibilities for the cellulose-based material in different areas.

This paper introduces a novel class of low-loss and cost-effective optical planar structures tailored for magnetic detection applications. These structures represent unconventional magneto-plasmonic devices specifically optimized for an ‘optical switch’ configuration. The structure consists of a 1D deep sinusoidal gold grating covered by a thin cobalt layer. In this unique arrangement, the excited plasmon induces a high-contrast switching phenomenon between the reflected free space intensity of specular (0th) and −1st diffracted orders, sensitive to any transverse magnetic fields applied to the cobalt layer. The use of these two distinct diffracted orders induces differential measurements, effectively mitigating common drift and perturbations. This innovative approach results in an enhanced detection sensitivity, showcasing the potential of these structures for advanced magnetic field sensing applications.

Surface plasmon polaritons (SPPs) have found their key applications in high-sensitivity biomolecular detection and integrated photonic devices for optical communication via light manipulation at nanostructures. Despite their broad utility, SPPs are known to be accompanied by other complex near-field propagation modes, such as quasi-cylindrical waves (QCWs) and composite diffracted evanescent waves (CDEWs), whose electromagnetic and quantum propagation effects have not been comprehensively understood especially regarding their mutual interaction with SPPs. In this study, we addressed this complexity by employing a nano groove structure and a high-stability broadband femtosecond laser as a light source, the spatial phase distribution around the nano slit edge was measured with relative stability of a 4.6 × 10 −11 at an averaging time of 0.01 s. Through this spatial phase spectrum, we precisely measured the nonlinear distribution of effective refractive index changes with an amplitude of 10 −2 refractive index units at the edge of the nano slit–groove structure. These results reveal that the near-field effects on local electron concentration induced by nanostructure’s discontinuity can be quantitatively measured, which can contribute to a deeper understanding of SPP phenomena in nanostructures for the optimal design and utilization of the SPP effects in diverse nano-plasmonic applications.

Femtosecond laser-induced valence state conversion (VC) in solid materials has attracted significant research attention due to its potential application in ultra-high density optical storage, boasting advantages such as ultra-high recording speed, easy reading, and high signal-to-noise ratio. However, identifying appropriate materials and technological solutions conducive to efficient single-laser-shot recording remains a pivotal challenge for practical applications. In this work, we report single femtosecond laser pulse–induced VC in BaFCl: Sm 3+ nanocrystals utilizing a 4F-configuration optical imaging system comprising two-dimensional scan galvo mirrors. For the first time, we experimentally reveal the luminescence mechanisms and channels of multiphoton absorption-induced Sm 2+ ions under both single and multiple 800 nm fs laser pulses. Leveraging the highly efficient single femtosecond laser pulse induced VC, we demonstrate a prototype optical storage experiment by sweeping the recording laser pulse. Remarkably, a threshold pulse energy as low as ∼100 nJ for effective single-laser-shot recording in BaFCl: Sm 3+ nanocrystals is obtained under the current experimental conditions. Our investigations offer profound insights into the physical mechanisms underlying femtosecond laser induced VC in solid materials, thereby promoting the prospects of VC based optical storage toward practical applications.

The information security plays a significant role in both our daily life and national security. As the traditional algorithm-based secure key distribution (SKD) is challenged by the quantum computers, the optical physical-layer SKD has attracted great attentions such as quantum SKD, chaos SKD, and reciprocity-based SKD. However, the cost of quantum SKD is still unaffordable and the latter two classical SKDs are only reliable with some preshared information or under simple eavesdrop. So far, there still lacks a high-security and low-cost optical SKD scheme. In this paper, we propose and demonstrate a high-security chip-encoded classical optical SKD paradigm based on the reciprocity of incoherent matrix. The security of SKD is facilitated by the incoherence of input light, and it is the first time that the classical optical SKD is achieved with silicon photonic chips and commercial optical fiber link. Experimentally, we set up a chip-to-chip communication link and achieve key generation rate of 100 bit/s over a 40 km single mode fiber, with key error rate of only 1.89 %. Moreover, we demonstrate the key capacity expansion of the proposed scheme with four-channel wavelength division multiplexing. Our proposal paves the way for the low-cost, high-security, and miniaturized optical SKD.

Heterostructures play a pivotal role in the design of valley-locked waveguides, facilitating the manipulation of width as an additional degree of freedom. Through this design, we demonstrate the extension of the topological guided modes from the domain wall of topologically nontrivial valley photonic crystals (VPCs) into the trivial VPCs. We propose a C 4 impurity to control the states of the light wave transmission in topological valley-locked waveguides through the intervalley scattering of defects in Quantum Valley Spin Hall topological insulators. By rotating the C 4 structure, the ON/OFF (0°/45°) state of the valley-locked waveguides can be controlled, effectively serving as a switch component. Furthermore, many unique applications could be devised based on the introduced impurity. Examples include the development of coding channels with arbitrary output ports and energy concentrators with enhanced secondary concentration. The proposed topological valley-locked waveguides with C 4 impurity will be beneficial for on-chip integrated photonic networks.

Retroreflectors can scatter the arbitrarily incident wave back to incoming direction, demonstrating great potential in wireless communication. However, there are limitations in adaptive retroreflection and polarization modulation with the existing retroreflectors. In this paper, a novel metasurface array with a reconfigurable transmission line (TL) network has been proposed to flexibly achieve multiple manipulation functions of electromagnetic wave including upper half-space cross-polarized retroreflection and circularly polarized retroreflection in the diagonal planes and radar cross section (RCS) reduction. To accomplish these capabilities, a novel transmission mode for ferrite circulators has been developed, enabling precise phase control of the TL. By adjusting the operation states of the circulators, multiple phase differences between forward and reverse transmission directions including ±90° and ±180° are generated. With the obtained phase differences, the metasurface array can flexibly achieve the adaptive retroreflection fields with multiple polarization characteristics based on the spatial field superposition and the RCS reduction based on the phase cancellation. To validate the concept and feasibility of the proposed reconfigurable retrodirective metasurface, an X-band prototype has been fabricated and measured. Good agreement between the simulation and the experiment is observed to verify the effectiveness of our retrodirective design in upper half-space wave manipulation.

Structural color, arising from the interaction between nanostructures and light, has experienced rapid development in recent years. However, high-order Mie resonances in dielectric materials often induce unnecessary sub-peaks, particularly at shorter wavelengths, reducing the vibrancy of colors. To address this, we have developed a multilayer dielectric metasurface based on silicon-rich silicon nitride (SRN), achieving expanded color gamut through precise refractive index matching and suppression of high-order resonances. This strategy introduces more design dimensions and can reduce the complexity of material deposition. It enables the generation of vibrant colors in a 3 × 3 array, with a resolution of approximately 25,400 dpi, demonstrating its potential applications in displays.