Simulation of Micropelletization Mechanisms in Polymer Melt – Air Systems

References

Ammon, F., “Optimization of a Novel System for the Production of Polymer Micropellets”, Master Thesis, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen (2015)Search in Google Scholar

Anderson, P. D., Dooley, J. and Meijer, H. E. H., “Viscoelastic Effects in Multilayer Polymer Extrusion”, Applied Rheology, 16, 198–205 (2006)10.1515/arh-2006-0014Search in Google Scholar

Aquite, W. M., “A Novel Polymer Extrusion Micropelletization Process”, Dissertation, University of Wisconsin-Madison, Madison (2015)Search in Google Scholar

Aquite, W. M., Kasperek, D., Rudolph, N. and Osswald, T. A., “Notes on the Micropelletization of Polymer Resins”, SPE ANTEC Tech. Papers, 1136–1140 (2012)Search in Google Scholar

Aquite, W. M., Engerer, M., Launhardt, M., Rudolph, N. and Osswald, T. A., “Simulation of Micropelletizing Mechanisms”, SPE ANTEC Tech. Papers, 1387–1391 (2011)Search in Google Scholar

Bair, S. S.: High Pressure Rheology for Quantitative Elastohydrodynamics, Elsevier, Oxford (2007)Search in Google Scholar

Barbosa-Cánovas, G. V.: Food Engineering – Volume II, EOLSS Publications, Oxford (2009)Search in Google Scholar

Baur, E., Brinkmann, S., Osswald, T. A. and Schmachtenberg, E.: Saechtling Kunststoff Taschenbuch, 30^th Edition, Hanser, Munich (2007) 10.3139/9783446414372Search in Google Scholar

Bentley, B. J., Leal, L. G., “An Experimental Investigation of Drop Deformation and Breakup in Steady, Two-Dimensional Linear Flows”, J. Fluid Mech., 167, 241–283 (1986) 10.1017/S0022112086002811Search in Google Scholar

Bistany, S., Dong, D., “A Study of Surface Haze Formation in Polypropylene/Acrylic Alloys”, SPE ANTEC Tech. Papers, 2555–2561 (2000)Search in Google Scholar

Covas, J. A., Agassant, J. F., Diogo, A. C., Vlachopoulos, J. and Walters, K.: Rheological Fundamentals of Polymer Processing, Springer Netherlands, Dordrecht (1995) 10.1007/978-94-015-8571-2Search in Google Scholar

Debbaut, B., Dooley, J., “Secondary Motions in Straight and Tapered Channels: Experiments and Three-Dimensional Finite Element Simulation with a Multimode Differential Viscoelastic Model”, J. Rheol., 43, 1525 (1999) 10.1122/1.551058Search in Google Scholar

Dooley, J., “Viscoelastic Flow Effects in Multilayer Polymer Coextrusion”, Dissertation, Technische Universiteit Eindhoven, Eindhoven (2002)Search in Google Scholar

Elmendorp, J. J., “A Study on Polymer Blending Microrheology”, Polym. Eng. Sci., 26, 418–426 (1986) 10.1002/pen.760260608Search in Google Scholar

Favero, J. L., Secchi, A. R., Cardozo, N. S. M. and Jasak, H., “Viscoelastic Flow Simulation: Development of a Methodology of Analysis Using the Software Openfoam and Differential Constitutive Equations”, Computer Aided Chemical Engineering, 27, 915–920 (2009) 10.1016/S1570-7946(09)70373-6Search in Google Scholar

Favero, J. L., Secchi, A. R., Cardozo, N. S. M. and Jasak, H., “Viscoelastic Fluid Analysis in Internal and in Free Surface Flows Using the Software Openfoam”, Comput. Chem. Eng., 34, 1984–1993 (2010) 10.1016/j.compchemeng.2010.07.010Search in Google Scholar

Free, D., “Pelletizing your Compound: What Are your Options?”, Plastics, Additives and Compounding, 8, 42–43 (2006) 10.1016/S1464-391X(06)70527-XSearch in Google Scholar

Funada, T., Joseph, D. D., “Viscous Potential Flow Analysis of Capillary Instability”, Int. J. Multiphase Flow, 28, 1459–1478 (2002) 10.1016/S0301-9322(02)00035-6Search in Google Scholar

Gallegos, C., Franco, J. M. and Partal, P., “Rheology of Food Dispersions”, in Rheology Reviews, British Society of Rheology, p. 19–65 (2004)Search in Google Scholar

Giacomin, A. J., Bird, R. B., Johnson, L. M. and Mix, A. W., “Large-Amplitude Oscillatory Shear Flow from the Corotational Maxwell Model”, J. Non-Newtonian Fluid Mech., 166, 1081–1099 (2011) 10.1016/j.jnnfm.2011.04.002Search in Google Scholar

Goldin, M., Yerushalmi, J., Pfeffer, R. and Shinnar, R., “Breakup of a Laminar Capillary Jet of a Viscoelastic Fluid”, J. Fluid Mech., 38, 689–711 (1969) 10.1017/S0022112069002540Search in Google Scholar

Habla, F., Marschall, H., Hinrichsen, O., Dietsche, L., Jasak, H. and Favero, J. L., “Numerical Simulation of Viscoelastic Two-Phase Flows Using Openfoam”, Chem. Eng. Sci., 66, 5487–5496 (2011) 10.1016/j.ces.2011.06.076Search in Google Scholar

Hirt, C., Nichols, B., “Volume of Fluid (VOF) Method for the Dynamics of Free Boundaries”, J. Comput. Phys., 39, 201–225 (1981) 10.1016/0021-9991(81)90145-5Search in Google Scholar

Holmes, L. T., Favero, J. and Osswald, T. A., “Numerical Simulation of Three-Dimensional Viscoelastic Planar Contraction Flow Using the Software Openfoam”, Comput. Chem. Eng., 37, 64–73 (2012a) 10.1016/j.compchemeng.2011.09.015Search in Google Scholar

Holmes, L. T., Fávero, J. L. and Osswald, T. A., “Modeling Viscoelastic Secondary Flows in Three-Dimensional Noncircular Ducts”, Polym. Eng. Sci., 52, 1715–1723 (2012b) 10.1002/pen.23103Search in Google Scholar

Ide, Y., White, J. L., “The Spinnability of Polymer Fluid Filaments”, J. Appl. Polym. Sci., 20, 2511–2531 (1976) 10.1002/app.1976.070200919Search in Google Scholar

Jasak, H., Jemcov, A. and Tuković, Ž., “Openfoam: A C++ Library for Complex Physics Simulations”, International Workshop on Coupled Methods in Numerical Dynamics, IUC 1–20, Dubrovnik (2007)Search in Google Scholar

Köpplmayr, T., Mayrhofer, E., “Numerical Simulation of Viscoelastic Layer Rearrangement in Polymer Melts Using Openfoam”, 30th International Conference of the Polymer Processing Society, Cleveland, 1–5 (2014) 10.1063/1.4918407Search in Google Scholar

Krutka, H. M., Shambaugh, R. L. and Papavassiliou, D. V., “Effects of the Polymer Fiber on the Flow Field from a Slot Melt Blowing Die”, Ind. Eng. Chem. Res., 47, 935–945 (2008) 10.1021/ie070871iSearch in Google Scholar

Launhardt, M., “Manufacturing of Micropellets Using Rayleigh Disturbances”, Master Thesis, University of Wisconsin-Madison, Madison (2011)Search in Google Scholar

Launhardt, M., Aquite, W., Rudolph, N. and Osswald, T. A., “Manufacturing of Micropellets Using Rayleigh Disturbances”, SPE ANTEC Tech. Papers, 1288–1293 (2011)Search in Google Scholar

Lima, N. C., D’Ávila, M. A., “Numerical Simulation of Electrohydrodynamic Flows of Newtonian and Viscoelastic Droplets”, J. Non-Newtonian Fluid Mech., 213, 1–14 (2014) 10.1016/j.jnnfm.2014.08.016Search in Google Scholar

Majumdar, B., Shambaugh, R. L., “Air Drag on Filaments in the Melt Blowing Process”, J. Rheol., 34, 591–601 (1990) 10.1122/1.550097Search in Google Scholar

Meijer, H. E. H., Lemstra, P. J. and Elemans, P. H. M., “Structured Polymer Blends”, Makromol. Chem. Macromol. Symp., 16, 113–135 (1988) 10.1002/masy.19880160109Search in Google Scholar

Morrison, F. A.: Understanding Rheology, Oxford University Press, New York (2001)Search in Google Scholar

Nguyen, M. N., Maxwell, B., “Melt Elasticity of Low Density Polyethylene”, Polym. Eng. Sci., 20, 972–976 (1980) 10.1002/pen.760201409Search in Google Scholar

Osswald, T. A.: Polymer Processing Fundamentals, Hanser Gardner, Cincinnati (1998)Search in Google Scholar

Osswald, T. A., Aquite, W. M., US Patent 9205590 B2 (2013)Search in Google Scholar

Osswald, T. A., Menges, G.: Materials Science of Polymers for Engineers, 2^nd Edition, Hanser, Munich (2003)Search in Google Scholar

Osswald, T. A., Menges, G.: Materials Science of Polymers for Engineers, 3^rd Edition, Hanser, Munich (2012) 10.3139/9781569905241Search in Google Scholar

Osswald, T. A., Rudolph, N.: Polymer Rheology: Fundamentals and Applications, Hanser, Munich (2014) 10.3139/9781569905234Search in Google Scholar

Osswald, T. A., Schäfer, C., “Micropelletization and their Application to Manufacture Porous Plastic Parts”, SPE ANTEC Tech. Papers, 832–836 (2016)Search in Google Scholar

Osswald, T. A., Schäfer, C., Aquite, W. M. and Fávero, J. L., “Internal and Free-Surface Viscoelastic Flow Simulations Using the Corotational Maxwell Constitutive Model”, SPE ANTEC Tech. Papers, 107–113 (2014)Search in Google Scholar

Puentes, J., “Building an Optimized Micropelletizer Die”, Master Thesis, Universidad Nacional De Colombia Sede, Bogota (2011)Search in Google Scholar

Rietzel, D., Aquite, W. M., Drummer, D. and Osswald, T. A., “Polymer Powders for Selective Laser Sintering – Production and Characterization”, 44th CIRP Conference on Manufacturing Systems, 1–6, Madison (2011)Search in Google Scholar

Rietzel, D., Drexler, M., Kühnlein, F., and Drummer, D., “Influence of Temperature Fields on the Processing of Polymer Powders by Means of Laser and Mask Sintering Technology”, 22nd International Solid Freeform Fabrication (SFF) Symposium, 252–262, Austin (2011)Search in Google Scholar

Rietzel, D., Kuehnlein, F. and Drummer, D., “Characterization of New Thermoplastics for Additive Manufacturing by Selective Laser Sintering”, SPE ANTEC Tech. Papers, 592–598 (2010)Search in Google Scholar

Sarghini, F., Masi, P. and Denaro, F. M., “Droplet Deformation and Break-Up Enhancement by Using Riblet-Like Microfluidic Devices”, 5th International Symposium on Food Rheology and Structure, 162–165, Zurich (2009)Search in Google Scholar

Schäfer, C., “Assessing Viscoelastic Flow Models while Simulating the Flow in Non-Circular Tubes”, Master Thesis, University of Wisconsin-Madison, Madison (2013)Search in Google Scholar

Shambaugha, R. L., “Air Drag on Filaments in the Melt Blowing Process”, J. Rheol., 34, 591–601 (1990) 10.1122/1.550097Search in Google Scholar

Shin, Y. M., Hohman, M. M., Brenner, M. P. and Rutledge, G. C., “Electrospinning: A Whipping Fluid Jet Generates Submicron Polymer Fibers”, Appl. Phys. Lett., 78, 1149–1151 (2001) 10.1063/1.1345798Search in Google Scholar

Stone, H. A., Leal, L. G., “Relaxation and Breakup of an Initially Extended Drop in an Otherwise Quiescent Fluid”, J. Fluid Mech., 198, 399–427 (1989) 10.1017/S0022112089000194Search in Google Scholar

Sutherland, W., “LII. The Viscosity of Gases and Molecular Force”, Philosophical Magazine Series 5, 36, 507–531 (1893) 10.1080/14786449308620508Search in Google Scholar

Ubbink, O., Issa, R. I., “A Method for Capturing Sharp Fluid Interfaces on Arbitrary Meshes”, J. Comput. Phys., 153, 26–50 (1999) 10.1006/jcph.1999.6276Search in Google Scholar

Wehmann, M., Mcculloch, W. J. G., “Melt Blowing Technology”, in Polypropylene, an A-Z Reference, Springer, Dordrecht, The Netherlands, p. 415–420 (1999)10.1007/978-94-011-4421-6_58Search in Google Scholar

Weller, H. G., Tabor, G., Jasak, H. and Fureby, C., “A Tensorial Approach to Computational Continuum Mechanics Using Object-Oriented Techniques”, Computers in Physics, 12, 620–631 (1998)10.1063/1.168744Search in Google Scholar

White, J. L., “Dynamics of Viscoelastic Fluids, Melt Fracture, and the Rheology of Fiber Spinning”, J. Appl. Polym. Sci., 8, 2339–2357 (1964) 10.1002/app.1964.070080527Search in Google Scholar

Xue, S.-C., Phan-Thien, N. and Tanner, R. I., “Numerical Study of Secondary Flows of Viscoelastic Fluid in Straight Pipes by an Implicit Finite Volume Method”, J. Non-Newtonian Fluid Mech., 59, 191–213 (1995) 10.1016/0377-0257(95)01365-3Search in Google Scholar

Yu, J. H., Fridrikh, S. V. and Rutledge, G. C., “The Role of Elasticity in the Formation of Electrospun Fibers”, Polymer, 47, 4789–4797 (2006) 10.1016/j.polymer.2006.04.050Search in Google Scholar

Yue, P., Dooley, J. and Feng, J. J., “A General Criterion for Viscoelastic Secondary Flow in Pipes of Noncircular Cross Section”, J. Rheol., 52, 315–332 (2008) 10.1122/1.2817674Search in Google Scholar

Ziabicki, A.: Fundamentals of Fibre Formation: The Science of Fibre Spinning and Drawing, John Wiley & Sons, New York (1976)Search in Google Scholar