Contents

Articles in the same Issue

1. Contents
2. Contents
3. Regular Contributed Articles
4. Semi-Rigid Composite Foams of Calcium Sodium Aluminosilicate from Eggshells Embedded in Polyurethane
5. Effect of Spin-Draw Rate and Stretching Ratio on Polypropylene Hollow Fiber Membrane Made by Melt-Spinning and Stretching Method
6. A Novel Non-Planar Transverse Stretching Process for Micro-Porous PTFE Membranes and Resulting Characteristics
7. Photo-Degradation of Polypropylene-Ascorbic Acid TiO₂ Composite Films
8. Melt Flow and Flexural Properties of Polypropylene Composites Reinforced with Graphene Nano-Platelets
9. Effect of the Addition of ENR on Foam Properties of EVA/NR/Clay Nanocomposites
10. Development of High Pressure Injection Technology for Normal Hydraulic Injection Molding Machines
11. Influence of Electron Induced Reactive Processing and Secondary Rubber Phase on Spinnability of Polypropylene and Polypropylene/Rubber Blends
12. Monitoring of Injection Molding Tool Corrosion and Effects of Wood Plastic Compound's Moisture on Material Properties
13. Simulation of Micropelletization Mechanisms in Polymer Melt – Air Systems
14. Cross-Linked Hydrophobic Starch Granules in Blends with PLA
15. Numerical Predictions of Fiber Orientation for Injection Molded Rectangle Plate and Tensile Bar with Experimental Validations
16. Fabrication of Polyethylene Terephthalate Microfluidic Chip Using CO₂ Laser System
17. Minimization of Warpage for Injection Molded Parts by Inverse Thermal Mold Design
18. Influence of Titanium Dioxide Modified Expandable Graphite and Ammonium Polyphosphate on Combustion Behavior and Physicomechanical Properties of Rigid Polyurethane Foam
19. Preparation, Foaming and Characterization of Poly(l-lactic acid))/Poly(d-lactic acid)-Grafted Graphite Oxide Blends
20. A Simple Method of Fabricating Graphene-Polymer Conductive Films
21. PPS News
22. PPS News
23. Seikei Kakou Abstracts
24. Seikei-Kakou Abstracts