Simulation of Thermal Phenomena on the Interface Molten Polymer/Powder Polymer During Rotational Molding
-
A. Tcharkhtchi
Abstract
In order to simulate the heat transfer phenomenon during rotational molding an alternative approach for the melt front treatment has been used. It was considered that a polymer particle adheres to the inner mould wall or to the polymer layer when the temperature reaches the melting point of polymer. The result of this alternative adhesion of new particles on molten polymer layer is the progress of melt front until all of particle are added to the inner surface of the polymer in the mold.
The simulation was based on an explicit finite volumes scheme which, allows to proceed with a fixed mesh of the whole domain. A numerical test, then, has been performed to illustrate the capabilities of the proposed model. The results of this numerical test showed the temperature evolution of external mold surface, in the molten polymer layer and on the interface molten polymer layer – air/polymer mixture region. These results have been then interpreted.
References
1 Crawford, R. J.: Progress in Rubber and Plastics Technology1, p. 1 (1990).Suche in Google Scholar
2 Guobin Liu, C. B., Park, C. B., Lefas, J. A.: Polymer Engineering and Science12, p. 1997 (1998).Suche in Google Scholar
3 Wang Xin, E. H., Harkin-Jones, E. H., Crawford, R. J., Fatnes, A. M.: Plastics Rubber and Composites7, p. 340 (2000).10.1179/146580100101541148Suche in Google Scholar
4 Tcharkhtchi, A., Barcelo, P., Mazabraud, Ph., Jousse, F., Kearns, M.: Advanced Engineering Materials7, p. 475 (2002).10.1002/1527-2648(20020717)4:7<475::AID-ADEM475>3.0.CO;2-0Suche in Google Scholar
5 Crawford, R. J., Nugent, P. J.: Plastics, Rubber and Composites Processing and Applications, p. 23 (1992).Suche in Google Scholar
6 Nugent, P. J., Crawford, R. J., in: Rotational Moulding of Plastcis, Crawford, R. J., (Ed.), John Wiley, New York (1997).Suche in Google Scholar
7 Liu, S. J., Yang, C. H.: Cellular Polymers4, p. 257 (2000).10.1023/A:1009890109693Suche in Google Scholar
8 Nugent, P. J.: PhD Thesis, Queen's University, Belfast (1990).Suche in Google Scholar
9 Wang, X. M.: PhD Thesis, Queen's University, Belfast (1994).Suche in Google Scholar
10 Throne, J. L.: Polym. Eng. Sci.4, p. 257 (1976).10.1002/pen.760160407Suche in Google Scholar
11 Sun, D. W., Crawford, R. J.: Plastics, Rubber and Composites Processing and Applications1, p. 47 (1993).Suche in Google Scholar
12 Attaran, M. T., Wright, E. J., Crawford, R. J.: Paper presented at SPE Antec, Toronto (1997).Suche in Google Scholar
13 Gogos, G., Olson, L. G., Liu, X., Pasham, V. R.: Polym. Eng. Sci.9, p. 1387 (1998).10.1002/pen.10309Suche in Google Scholar
© 2004, Carl Hanser Verlag, Munich
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Polymer Processing Society Annual Meeting 21
- Screw Extrusion
- Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder
- Experiments on Characteristic Deformation and Breakup Behaviors of an Immiscible Drop in a Screw Channel Flow
- Die Extrusion
- Flow Balancing in Extrusion Dies for Thermoplastic Profiles
- Fiber
- Effects of Sparse Long Chain Branching on the Spinning Stability of LLDPEs
- Dry Spinning of Polymer Fibers in Ternary Systems
- Dry Spinning of Polymer Fibers in Ternary Systems
- Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber
- Film
- Numerical and Physical Modeling of Polymer Crystallization
- Numerical and Physical Modeling of Polymer Crystallization
- Modeling
- Study on Viscoelastic Behavior and Extrusion Blow Molding Processability of PP/PE Blends
- Simulation of Thermal Phenomena on the Interface Molten Polymer/Powder Polymer During Rotational Molding
- Effect of Mold Temperature on Structure and Property Variations of PBT Injection Moldings in the Thickness Direction
- Tensile and Flexural Properties of β-Nucleated Polypropylenes
- Predicting the Long-term Creep Behavior of Plastics Using the Short-term Creep Test
- PPS News
- PPS News
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Polymer Processing Society Annual Meeting 21
- Screw Extrusion
- Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder
- Experiments on Characteristic Deformation and Breakup Behaviors of an Immiscible Drop in a Screw Channel Flow
- Die Extrusion
- Flow Balancing in Extrusion Dies for Thermoplastic Profiles
- Fiber
- Effects of Sparse Long Chain Branching on the Spinning Stability of LLDPEs
- Dry Spinning of Polymer Fibers in Ternary Systems
- Dry Spinning of Polymer Fibers in Ternary Systems
- Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber
- Film
- Numerical and Physical Modeling of Polymer Crystallization
- Numerical and Physical Modeling of Polymer Crystallization
- Modeling
- Study on Viscoelastic Behavior and Extrusion Blow Molding Processability of PP/PE Blends
- Simulation of Thermal Phenomena on the Interface Molten Polymer/Powder Polymer During Rotational Molding
- Effect of Mold Temperature on Structure and Property Variations of PBT Injection Moldings in the Thickness Direction
- Tensile and Flexural Properties of β-Nucleated Polypropylenes
- Predicting the Long-term Creep Behavior of Plastics Using the Short-term Creep Test
- PPS News
- PPS News
