Home Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber
Article
Licensed
Unlicensed Requires Authentication

Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber

  • Y. Feng and C. F. Xiao
Published/Copyright: May 2, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 19 Issue 3

Abstract

A concept of potential crosslinker was introduced into the synthesizing process of highly oil-absorptive resin which is traditionally prepared by single chemical crosslinking. The resin was dissolved in DMAc and then span into fiber. The fiber was heated after spinning to obtain three-dimensional network structure. The effects of potential crosslinker content, crosslinked time and crosslinked temperature on the absorptive properties of fiber were studied. The structure of oil-absorptive fiber was analyzed by FTIR, DMA and SEM.

∗ Mail address: C. F. Xiao, Dept. of Materials Science, Tianjin Polytechnic University, Chenglin Zhuang Road 63, Tianjin, PRC E-mail:

References

1 U. S. Patent 5 763 083 (1998) Berrigan, M. R..Search in Google Scholar

2 U. S. Patent 5 834 385 (1998) Blaney, C. A..Search in Google Scholar

3 JP Patent 05 209217 (1993) Thucha, H..Search in Google Scholar

4 JP Patent 0517537 (1993) Honda, T..Search in Google Scholar

5 Mei, H. Z., Cho, W.-J.: J. Appl. Polym. Sci.85, p. 2119 (2002).10.1002/app.10778Search in Google Scholar

6 Mei, H. Z., Cho, W.-J.: Polymer International50, p. 1193 (2001).10.1002/pi.762Search in Google Scholar

7 Shimizu, T., Koshiro, S., Yamada, Y.: J. Appl. Polym. Sci.65, p. 179 (1997).10.1002/(SICI)1097-4628(19970705)65:1<179::AID-APP21>3.0.CO;2-YSearch in Google Scholar

8 Kim, S.-H., Chung, I.-D., Ha, C.-S.: J. Appl. Polym. Sci.73, p. 2349 (1999).10.1002/(SICI)1097-4628(19990919)73:12<2349::AID-APP4>3.0.CO;2-LSearch in Google Scholar

9 Jang, J., Kim, B.-S.: J. Appl. Polym. Sci.77, p. 903 (2000).10.1002/(SICI)1097-4628(20000725)77:4<903::AID-APP26>3.0.CO;2-ESearch in Google Scholar

10 Jang, J., Kim, B.-S.: J. Appl. Polym. Sci.77, p. 914 (2000).10.1002/(SICI)1097-4628(20000725)77:4<914::AID-APP27>3.0.CO;2-7Search in Google Scholar

11 Mei, H. Z., Cho, W.-J.: J. Appl. Polym. Sci.89, p. 1818 (2003).10.1002/app.12252Search in Google Scholar

Received: 2003-9-9
Accepted: 2004-3-9
Published Online: 2013-05-02
Published in Print: 2004-09-01

© 2004, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Polymer Processing Society Annual Meeting 21
  5. Screw Extrusion
  6. Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder
  7. Experiments on Characteristic Deformation and Breakup Behaviors of an Immiscible Drop in a Screw Channel Flow
  8. Die Extrusion
  9. Flow Balancing in Extrusion Dies for Thermoplastic Profiles
  10. Fiber
  11. Effects of Sparse Long Chain Branching on the Spinning Stability of LLDPEs
  12. Dry Spinning of Polymer Fibers in Ternary Systems
  13. Dry Spinning of Polymer Fibers in Ternary Systems
  14. Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber
  15. Film
  16. Numerical and Physical Modeling of Polymer Crystallization
  17. Numerical and Physical Modeling of Polymer Crystallization
  18. Modeling
  19. Study on Viscoelastic Behavior and Extrusion Blow Molding Processability of PP/PE Blends
  20. Simulation of Thermal Phenomena on the Interface Molten Polymer/Powder Polymer During Rotational Molding
  21. Effect of Mold Temperature on Structure and Property Variations of PBT Injection Moldings in the Thickness Direction
  22. Tensile and Flexural Properties of β-Nucleated Polypropylenes
  23. Predicting the Long-term Creep Behavior of Plastics Using the Short-term Creep Test
  24. PPS News
  25. PPS News
https://doi.org/10.3139/217.1823

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Polymer Processing Society Annual Meeting 21
  5. Screw Extrusion
  6. Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder
  7. Experiments on Characteristic Deformation and Breakup Behaviors of an Immiscible Drop in a Screw Channel Flow
  8. Die Extrusion
  9. Flow Balancing in Extrusion Dies for Thermoplastic Profiles
  10. Fiber
  11. Effects of Sparse Long Chain Branching on the Spinning Stability of LLDPEs
  12. Dry Spinning of Polymer Fibers in Ternary Systems
  13. Dry Spinning of Polymer Fibers in Ternary Systems
  14. Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber
  15. Film
  16. Numerical and Physical Modeling of Polymer Crystallization
  17. Numerical and Physical Modeling of Polymer Crystallization
  18. Modeling
  19. Study on Viscoelastic Behavior and Extrusion Blow Molding Processability of PP/PE Blends
  20. Simulation of Thermal Phenomena on the Interface Molten Polymer/Powder Polymer During Rotational Molding
  21. Effect of Mold Temperature on Structure and Property Variations of PBT Injection Moldings in the Thickness Direction
  22. Tensile and Flexural Properties of β-Nucleated Polypropylenes
  23. Predicting the Long-term Creep Behavior of Plastics Using the Short-term Creep Test
  24. PPS News
  25. PPS News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 9.9.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.1823/html
Scroll to top button