PPS News

Artikel in diesem Heft

1. Contents
2. Contents
3. Editorial
4. Polymer Processing Society Annual Meeting 21
5. Screw Extrusion
6. Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder
7. Experiments on Characteristic Deformation and Breakup Behaviors of an Immiscible Drop in a Screw Channel Flow
8. Die Extrusion
9. Flow Balancing in Extrusion Dies for Thermoplastic Profiles
10. Fiber
11. Effects of Sparse Long Chain Branching on the Spinning Stability of LLDPEs
12. Dry Spinning of Polymer Fibers in Ternary Systems
13. Dry Spinning of Polymer Fibers in Ternary Systems
14. Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber
15. Film
16. Numerical and Physical Modeling of Polymer Crystallization
17. Numerical and Physical Modeling of Polymer Crystallization
18. Modeling
19. Study on Viscoelastic Behavior and Extrusion Blow Molding Processability of PP/PE Blends
20. Simulation of Thermal Phenomena on the Interface Molten Polymer/Powder Polymer During Rotational Molding
21. Effect of Mold Temperature on Structure and Property Variations of PBT Injection Moldings in the Thickness Direction
22. Tensile and Flexural Properties of β-Nucleated Polypropylenes
23. Predicting the Long-term Creep Behavior of Plastics Using the Short-term Creep Test
24. PPS News
25. PPS News