Startseite Numerical Simulation of Extrusion Coating
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Numerical Simulation of Extrusion Coating

Contribution to the Understanding of Adhesion Mechanisms between Grafted Polypropylene and Aluminium
  • S. Devisme , J.-M. Haudin , J.-F. Agassant , D. Rauline und F. Chopinez
Veröffentlicht/Copyright: 26. März 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 22 Heft 1

Abstract

In packaging industry, many structures are produced by extrusion coating. In this process, a polymer film is extruded through a slit die, then stretched in air, coated on a substrate (paper, aluminium or steel foil) between a chill roll and a flexible pressure roll, and finally cooled on successive chill rolls. Due to their non-polar character, polypropylenes are not suitable for extrusion coating on metallic surfaces. Adhesive properties can be improved by grafting on the polymer chain a polar group like maleic anhydride which may react with the aluminium surface.

Our purpose was to develop a general model in order to predict the temperature field in the thickness of the multilayered structure along the stretching, laminating and cooling steps, and especially near the polymer/metal interface. This model includes crystallization kinetics and accounts carefully for the heat transfer coefficient with the successive rolls and surrounding air. Its predictions have been successfully compared to experimental temperature measurements along the coating line for various processing conditions (velocity, roll temperature, etc). Moreover, thermal history has a real impact on structure and morphology in the film. All these aspects are revealed by microscopic observations of thin microtomed sections of the film and X-ray diffraction experiments. Finally, adhesion properties of the laminate have been tested for the same process conditions. A good correlation has been established between adhesion properties and the thermal history experienced by the grafted polypropylene near the interface with aluminium before crystallization.

∗ Mail address: J.-M. Haudin, Centre de Mise en Forme des Matériaux, UMR CNRS n° 7635, Ecole des Mines de Paris, BP 207, 06904 Sophia Antipolis Cedex, France. E-mail:

References

1d'Halewyn, S., Agassant, J.-F., Demay, Y.: Polym. Eng. Sci. 30, p. 335 (1990)10.1002/pen.760300604Suche in Google Scholar

2Debbaut, B., Marchal, J.-M.: Z. Angew. Math. Phys.46, Special Issue, p. S679 (1995)Suche in Google Scholar

3Silagy, D., Demay, Y., Agassant, J.-F.: Polym. Eng. Sci. 36, p. 2614 (1996)10.1002/pen.10661Suche in Google Scholar

4Smith, S., Stolle, D.: Polym. Eng. Sci. 40, p. 1870 (2000)10.1002/pen.11319Suche in Google Scholar

5Smith, S., Stolle, D.: Polym. Eng. Sci. 43, p. 1105 (2003)10.1002/pen.10094Suche in Google Scholar

6Sollogoub, C., Demay, Y., Agassant, J.-F.: Intern. Polym. Process. 18, p. 80 (2003)10.3139/217.1725Suche in Google Scholar

7Sakaki, K., Katsumoto, R., Kajiwara, T.: Polym. Eng. Sci. 36, p. 1821 (1996)10.1002/pen.10577Suche in Google Scholar

8Thery, S., Legros, A., Balladon, P., in: Mechanics and Mechanisms of Damage Composites. Baptiste, D. (Ed.), Mechanical Engineering Publications Limited, London, p. 339 (1991)Suche in Google Scholar

9Stralin, A., Hjertberg, T.: J. Adhes. Sci. Technol. 7, p. 1211 (1993)10.1163/156856193X00060Suche in Google Scholar

10Cotto, D., Duffo, P., Haudin, J.-M.: Intern. Polym. Process. 4, p. 103 (1989)10.3139/217.890103Suche in Google Scholar

11Billon, N., Barq, P., Haudin, J.-M.: Intern. Polym. Process. 6, p. 348 (1991)10.3139/217.910348Suche in Google Scholar

12Duffo, P., Monasse, B., Haudin, J.-M.: J. Polym. Eng. 10, p. 151 (1991)10.1515/POLYENG.1991.10.1-3.151Suche in Google Scholar

13Jay, F., Monasse, B., Haudin, J.-M.: Intern. J. Form. Proc. 1 p. 75 (1998)Suche in Google Scholar

14Lamberti, G., Titomanlio, G.: Macromol. Symp. 185, p. 167 (2002)10.1002/1521-3900(200208)185:1<167::AID-MASY167>3.0.CO;2-8Suche in Google Scholar

15Titomanlio, G., Lamberti, G.: Rheol. Act. 43, p. 146 (2004)10.1007/s00397-003-0329-4Suche in Google Scholar

16Kumpinsky, E.: Ind. Eng. Chem. Res. 32, p. 2866 (1993)10.1021/ie00023a059Suche in Google Scholar

17Trouilhet, Y., Morris, B. A., in: Polymers Laminations and Coatings Conference, Tappi Proceedings, p. 457 (1999)Suche in Google Scholar

18Comien, P.: Thesis, Université de Haute Alsace, France (1987)Suche in Google Scholar

19Thery, S., Jacquet, D., Mantel, M.: J. Adhes. 56, p. 1 (1996)10.1080/00218469608010495Suche in Google Scholar

20Bistac, S., Vallat, M.-F., Schultz., J.: Appl. Spectrosc. 51, p. 1823 (1997)10.1366/0003702971939893Suche in Google Scholar

21Schneider, B., Hennemann, O.-D.: J. Adhes. 78, p. 779 (2002)10.1080/00218460213837Suche in Google Scholar

22Pearson, J. R. A.: Mechanical Principles of Polymer Melt Process. Pergamon Press, London (1966)Suche in Google Scholar

23Sergent, J. Ph.: Thesis, Université Louis Pasteur, Strasbourg, France (1977)Suche in Google Scholar

24Agassant, J.-F., Avenas, P., Sergent, J.-Ph., Carreau, P.: Polymer Processing Principles and Modeling. Hanser Publishers, Munich (1991)Suche in Google Scholar

25Barq, P., Haudin, J.-M., Agassant, J.-F., Bourgin, P.: Intern. Polym. Process. 9, p. 350 (1994)10.3139/217.940350Suche in Google Scholar

26Barq, P., Haudin, J.-M., Agassant, J.-F.: Intern. Polym. Process. 7, p. 334 (1992)10.3139/217.920334Suche in Google Scholar

27Alaie, S. M., Papanastasiou, T. C.: Polym. Eng. Sci. 31, p. 67 (1991)10.1002/pen.760310203Suche in Google Scholar

28Beaulne, M., Mitsoulis, E.: Intern. Polym. Process. 14, p. 261 (1999)10.3139/217.1554Suche in Google Scholar

29Lamberti, G., Titomanlio, G., Brucato, V.: Chem. Eng. Sci. 56, p. 5749 (2001)10.1016/S0009-2509(01)00286-XSuche in Google Scholar

30Acierno, D., Di Maio, L.: Polym. Eng. Sci. 40, p. 108 (2000)10.1002/pen.11143Suche in Google Scholar

31Ozawa, T.: Polymer12, p. 150 (1971)10.1016/0032-3861(71)90041-3Suche in Google Scholar

32Monasse, B.: J. Mater. Sci. 30, p. 5002 (1995)10.1007/BF01154515Suche in Google Scholar

33Tribout, C.: Thesis, Ecole des Mines de Paris, France (1993)Suche in Google Scholar

34Blethen, C. S.: Tappi Papper Syn. Conf., p. 27 (1980)Suche in Google Scholar

35Hieber, C. A.: Polym. Eng. Sci. 42, p. 1387 (2002)10.1002/pen.11039Suche in Google Scholar

36Delaunay, D., Le Bot, P., Fulchiron, R.: Polym. Eng. Sci. 40, p. 1682 (2000)10.1002/pen.11300Suche in Google Scholar

37Sridhar, L., Narh, K. A.: J. Appl. Polym. Sci. 75, p. 1776 (2000)10.1002/(SICI)1097-4628(20000401)75:14<1776::AID-APP12>3.0.CO;2-GSuche in Google Scholar

38Cheng, S. Z. D., Janimak, J. J. J., Rodriguez, J., in: Polypropylene Structure, Blends and Composites. Karger-Kocsis, J. (Ed.), Chapman&Hall, London (1995)Suche in Google Scholar

39Hoffman, J. D., Frolen, L. J., Ross, G. S., Lauritzen, J. I.: J. Res. Nat. Bur. Std., 79 (A6), p. 671 (1975)10.6028/jres.079A.026Suche in Google Scholar

40Monasse, B.: Thesis, Ecole des Mines de Paris (1982)Suche in Google Scholar

Received: 2006-4-7
Accepted: 2006-8-2
Published Online: 2013-03-26
Published in Print: 2007-03-01

© 2007, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. International Polymer Processing Special Issue: European Coating Symposium 2005, University of Bradford, UK
  5. Invited Papers
  6. Coating and Polymer Processing
  7. Practical Limitations to Carrier Layer Formation on Inclined Planes
  8. Simulation of 3D Crystallization of Colloidal Nanoparticles on a Substrate during Drying
  9. Asymmetric Surface Roughness Formationon Moving Non-isothermal Liquid Coatings
  10. Inkjet Printing of Conductive and Resistive Coatings
  11. Moisture Sorption and Transport in Polylactide
  12. 10.3139/217.0992
  13. Review Article
  14. Welding of Plastics: Fundamentals and New Developments
  15. Regular Contributed Articles
  16. Numerical Simulation of Viscous Flow in a Partially filled Co-rotating Twin Screw Extruder
  17. Invited Papers
  18. A New Calculation Model and Optimization Method for Maddock Mixers in Single Screw Plasticising Technology
  19. Regular Contributed Articles
  20. Residual Wall Thickness Distribution at the Transition and Curve Sections of Water-assisted Injection Molded Tubes
  21. Numerical Simulation of Extrusion Coating
  22. Correlation between Injection Molding Parameters, Morphology and Mechanical Properties of PPS/SEBS Blend Using Artificial Neural Networks
  23. PPS News
  24. PPS News
  25. Seikei-Kakou Abstracts
  26. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.0038

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. International Polymer Processing Special Issue: European Coating Symposium 2005, University of Bradford, UK
  5. Invited Papers
  6. Coating and Polymer Processing
  7. Practical Limitations to Carrier Layer Formation on Inclined Planes
  8. Simulation of 3D Crystallization of Colloidal Nanoparticles on a Substrate during Drying
  9. Asymmetric Surface Roughness Formationon Moving Non-isothermal Liquid Coatings
  10. Inkjet Printing of Conductive and Resistive Coatings
  11. Moisture Sorption and Transport in Polylactide
  12. 10.3139/217.0992
  13. Review Article
  14. Welding of Plastics: Fundamentals and New Developments
  15. Regular Contributed Articles
  16. Numerical Simulation of Viscous Flow in a Partially filled Co-rotating Twin Screw Extruder
  17. Invited Papers
  18. A New Calculation Model and Optimization Method for Maddock Mixers in Single Screw Plasticising Technology
  19. Regular Contributed Articles
  20. Residual Wall Thickness Distribution at the Transition and Curve Sections of Water-assisted Injection Molded Tubes
  21. Numerical Simulation of Extrusion Coating
  22. Correlation between Injection Molding Parameters, Morphology and Mechanical Properties of PPS/SEBS Blend Using Artificial Neural Networks
  23. PPS News
  24. PPS News
  25. Seikei-Kakou Abstracts
  26. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 7.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.0038/pdf
Button zum nach oben scrollen