Startseite Technik BN nanosheet modified SnO materials for enhancing photocatalytic properties
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

BN nanosheet modified SnO materials for enhancing photocatalytic properties

  • Baoyan Liang und Wangxi Zhang
Veröffentlicht/Copyright: 31. Januar 2020
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 111 Heft 2

Abstract

Novel SnO/BN photocatalysts were prepared via ultrasonic reaction. Their phase composition, morphology, and photocatalytic performance were investigated using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and diffuse reflection spectra. The morphological results indicated that BN nanosheets were loaded on the surface of SnO flakes. By modifying BN, the visible light response of SnO was improved. The SnO/BN photocatalysts exhibited enhanced photocatalytic activity for the degradation of methyl orange, and a degradation efficiency of at least 95 % under visible light irradiation was observed after 60 min.

Keywords: SnO; BN; Photocatalysis; Visible light
∗ Correspondence address, Dr. Wangxi Zhang, Materials & Chemical Engineering school, Zhongyuan University of Technology, Zhengzhou, 450007, P.R. China. Tel.: +86 371 69975740, Fax: +86 371 69975740, E-mail:

References

[1] J. Yao , Y.J.Yin, C.X.Wang: Int. J. Mater. Res.101 (2010) 1311–1315. 10.3139/146.110411Suche in Google Scholar

[2] N.R. Khalid , A.Majid, M.B.Tahir, N.A.Niaz, S.Khalid: Ceram. Int.43 (2017) 14552–14571. 10.1016/j.ceramint.2017.08.143Suche in Google Scholar

[3] K. Santhi , C.Rani, S.Karuppuchamy: J. Alloys Compd.662 (2016) 102–107. 10.1016/j.jallcom.2015.12.007Suche in Google Scholar

[4] B.Y. Liang , D.H.Han, C.H.Sun, W.X.Zhang, Q.Qin: Ceram. Int.44 (2018) 7315–7318. 10.1016/j.ceramint.2018.01.093Suche in Google Scholar

[5] B.Y. Liang , W.X.Zhang, Y.L.Zhang: J. Inorg. Organomet. P, 29 (2018) 17–21. 10.1007/s10904-018-0959-8Suche in Google Scholar

[6] B.Y. Liang , W.X.Zhang, Y.L.Zhang, R.J.Zhang, Y.Liu: Mater. Res. Express, 6 (2019) 045609. 10.1088/2053-1591/aae463Suche in Google Scholar

[7] B.Y. Liang , D.H.Han, C.H.Sun, W.X.Zhang, Y.L.Zhang, R.J.Zhang, Fuller. Nanotub. Car.N.26 (2018) 751–755. 10.1080/1536383X.2018.1494157Suche in Google Scholar

[8] B.Y. Liang , D.H.Han, C.H.Sun, W.X.Zhang, Q.Qin: Int. J. Mater. Res.109 (2018) 880–884. 10.3139/146.111681Suche in Google Scholar

[9] A. Lipp , K.A.Schwetz, K.Hunold: J. Eur. Ceram. Soc.5 (1989) 3–9. 10.1016/0955-2219(89)90003-4Suche in Google Scholar

[10] D. Pacilé , J.C.Meyer, Ç.Ö.Girit, A.Zettl: Appl. Phys. Lett.92 (2008) 133107. 10.1063/1.2903702Suche in Google Scholar

[11] H. Zeng , C.Zhi, Z.Zhang, X.Wei, X.Wang, W.Guo, Y.Bando, D.Golberg: Nano. Lett.10 (2010) 5049–5055. 10.1021/nl103251mSuche in Google Scholar PubMed

[12] H. Xu , L.Liu, Y.H.Song, L.Y.Huang, Y.P.Li, Z.G.Chen, Q.Zhang, H.M.Li: J. Alloys Compd.660 (2016) 48–5410.1016/j.jallcom.2015.11.042Suche in Google Scholar

[13] X.L. Fu , Y.F.Hu, T.Zhang, S.F.Chen: J. Hazard. Mater.244–245 (2013) 102–110. 10.1016/j.jhazmat.2012.11.033Suche in Google Scholar PubMed

[14] X.L. Fu , Y.F.Hu, T.Zhang, S.F.Chen: App. Surf. Sci.280 (2013) 828–835. 10.1016/j.apsusc.2013.05.069Suche in Google Scholar

[15] M. Fondell , M.Gorgoi, M.Boman, A.Lindblad: J. Electron Spectrosc.195 (2014) 195–199. 10.1016/j.elspec.2014.07.012Suche in Google Scholar

[16] P.S. Shewale , K.U.Sim, Y.B.Kim, J.H.Kim, A.V.Moholkar, M.D.Uplane: J. Lumin.139 (2013) 113–118. 10.1016/j.jlumin.2013.01.021Suche in Google Scholar

[17] J.S. Tawale , G.Gupta, A.Mohan, A.Kumar, A.K.Srivastava: Sens. Actuators B.201 (2014) 369–377. 10.1016/j.snb.2014.04.099Suche in Google Scholar
Received: 2018-11-18
Accepted: 2019-08-14
Published Online: 2020-01-31
Published in Print: 2020-02-12

© 2020, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Solidification processes of as-cast alloys and phase equilibria at 1 300 °C of the Nb–Si–V ternary system
  5. Compressive properties and energy absorption response of cBN added Al composite foams
  6. Deformation characteristics of Cu-30 % Zn alloy subjected to dynamic equal channel angular pressing (DECAP)
  7. Stress-based forming limit diagrams (SFLD) considering strain rate effect and ductile damage phenomenon
  8. Processing and properties of ultrafine-grained Mg-3Al-1Zn magnesium alloy microtubes fabricated via isothermal hot microforming of SPD processed precursors
  9. The effect of in-situ formed TiB2 particles on microstructural and mechanical properties of laser melted copper alloy
  10. Nanoindentation study on Al86Ni8Y6 glassy alloy synthesized via mechanical alloying and spark plasma sintering
  11. Synthesis of nanosized cadmium ferrite and assaying its magnetic and dielectric properties by analytical and physical techniques
  12. BN nanosheet modified SnO materials for enhancing photocatalytic properties
  13. Preparation of salt microparticles via the anti-solvent recrystallization process
  14. Short Communications
  15. CVD grown graphene on commercial and electroplated Cu substrates: Raman spectroscopy analysis
  16. DGM News
  17. DGM News
https://doi.org/10.3139/146.111860
Schlagwörter für diesen Artikel
SnO; BN; Photocatalysis; Visible light

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Solidification processes of as-cast alloys and phase equilibria at 1 300 °C of the Nb–Si–V ternary system
  5. Compressive properties and energy absorption response of cBN added Al composite foams
  6. Deformation characteristics of Cu-30 % Zn alloy subjected to dynamic equal channel angular pressing (DECAP)
  7. Stress-based forming limit diagrams (SFLD) considering strain rate effect and ductile damage phenomenon
  8. Processing and properties of ultrafine-grained Mg-3Al-1Zn magnesium alloy microtubes fabricated via isothermal hot microforming of SPD processed precursors
  9. The effect of in-situ formed TiB2 particles on microstructural and mechanical properties of laser melted copper alloy
  10. Nanoindentation study on Al86Ni8Y6 glassy alloy synthesized via mechanical alloying and spark plasma sintering
  11. Synthesis of nanosized cadmium ferrite and assaying its magnetic and dielectric properties by analytical and physical techniques
  12. BN nanosheet modified SnO materials for enhancing photocatalytic properties
  13. Preparation of salt microparticles via the anti-solvent recrystallization process
  14. Short Communications
  15. CVD grown graphene on commercial and electroplated Cu substrates: Raman spectroscopy analysis
  16. DGM News
  17. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.12.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111860/html?lang=de
Button zum nach oben scrollen