Startseite Synthesis and growth mechanisms of ZrC whiskers fabricated by a VLS process
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Synthesis and growth mechanisms of ZrC whiskers fabricated by a VLS process

  • Dongju Lee und Sung Ho Song
Veröffentlicht/Copyright: 31. Juli 2017
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 108 Heft 8

Abstract

The mechanisms of nano-sized ZrC whisker formation by a vapor–liquid–solid process are investigated, which produces a very high purity, single crystal whisker. Rectangular ZrC whiskers with a cross-sectional diameter of 100–200 nm and lengths up to tens of microns are formed under the catalytic effect of nickel. The ZrC whiskers are characterized using scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. ZrC whiskers can be used as a potential reinforcing and strengthening phase for ceramic composites.

Keywords: Zirconium carbide; Whisker; VLS process; Microstructure
*Correspondence address, Prof. Sung Ho Song, Division of Advanced Materials Engineering, Kongju National University, Chungnam, 330-717, Republic of Korea, Tel.: +82-41-521-9379, Fax: +82-41-521-9371, E-mail:

References

[1] D.W.Lee, J.S.Haggerty: J. Am. Ceram. Soc.52 (1969) 641. 10.1111/j.1151-2916.1969.tb16067.xSuche in Google Scholar

[2] Y.S.Won, V.G.Varanasi, O.Kryliouk, T.J.Anderson, L.McElwee-White, R.J.Perez: J. Cryst. Growth307 (2007) 302. 10.1016/j.jcrysgro.2007.05.039Suche in Google Scholar

[3] L.E.Toth: Transition metal carbides and nitrides, Academic Press, New York, USA (1971) p xiii.Suche in Google Scholar

[4] Y.S.Nam, X.M.Cui, L.Jeong, J.Y.Lee, W.H.Park: Thin Solid Films517 (2009) 6531. 10.1016/j.tsf.2009.04.021Suche in Google Scholar

[5] C.R.Rambo, J.Cao, O.Rusina, H.Sieber: Carbon43 (2005) 1174. 10.1016/j.carbon.2004.12.009Suche in Google Scholar

[6] L.Xu, C.Huang, H.Liu, B.Zou, H.Zhu, G.Zhao, J.Wang: Int. J. Refract. Metals Hard Mater.42 (2014) 116. 10.1016/j.ijrmhm.2013.08.011Suche in Google Scholar

[7] A.Kato, N.Tamari: J. Cryst. Growth49 (1980) 199. 10.1016/0022-0248(80)90083-4Suche in Google Scholar

[8] Y.Kurokawa, H.Ota, T.Sato: J. Mater. Sci. Lett.13 (1994) 516. 10.1007/bf00540185Suche in Google Scholar

[9] N.Tamari, A.Kato: J. Less Common Met.58 (1978) 147. 10.1016/0022-5088(78)90196-0Suche in Google Scholar

[10] A.I.Gusev: Phys. Status Solidi B163 (1991) 17. 10.1002/pssb.2221630102Suche in Google Scholar

[11] M.Hansen, R.P.Elliott: HT Research Institute. [from old catalog], Constitution of binary alloys. 2nd Ed., McGraw-Hill, New York, USA (1958) 1305.Suche in Google Scholar

[12] A.P.Levitt: Whisker technology, Wiley-Interscience, New York, USA (1970) p xii.Suche in Google Scholar

[13] X.Hou, Z.Yu, Z.Chen, B.Zhao, K.-C.Chou: Dalton Trans.41 (2012) 7127. 10.1039/C2DT30114HSuche in Google Scholar PubMed

[14] J.V.Milewski, F.D.Gac, J.J.Petrovic, S.R.Skaggs: J. Mater. Sci.20 (1985) 1160. 10.1007/bf01026309Suche in Google Scholar

Received: 2017-01-10
Accepted: 2017-04-24
Published Online: 2017-07-31
Published in Print: 2017-08-11

© 2017, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Review
  4. Current developments of biomedical porous Ti–Mo alloys
  5. Original Contributions
  6. Investigation of crystallization kinetics and deformation behavior in supercooled liquid region of CuZr-based bulk metallic glass
  7. Modeling of hardening and fracture behavior in Gr.65 steel after intercritical heat treatments
  8. Time evolution of agglomerate size of semisolid magnesium alloy AZ91D during a real isothermal shearing
  9. Effect of stirring speed on microstructure of A356 alloy cast through rheometal process
  10. Phase equilibria of the Mo–Al–Ho ternary system
  11. Experimental investigation of phase equilibria in the Zr–Cu–Ni ternary system
  12. Hot corrosion of the ceramic composite coating Ni3Al–Al2O3–Al2O3/MgO plasma sprayed on 316L stainless steel
  13. Tribological properties of B4C–TiB2–TiC–Ni cermet coating produced by HVOF
  14. Electrochemically fabricated Fe–Ni alloy nanowires and their structural characterization
  15. Short Communications
  16. Synthesis and growth mechanisms of ZrC whiskers fabricated by a VLS process
  17. DGM News
  18. DGM News
https://doi.org/10.3139/146.111520
Schlagwörter für diesen Artikel
Zirconium carbide; Whisker; VLS process; Microstructure

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Review
  4. Current developments of biomedical porous Ti–Mo alloys
  5. Original Contributions
  6. Investigation of crystallization kinetics and deformation behavior in supercooled liquid region of CuZr-based bulk metallic glass
  7. Modeling of hardening and fracture behavior in Gr.65 steel after intercritical heat treatments
  8. Time evolution of agglomerate size of semisolid magnesium alloy AZ91D during a real isothermal shearing
  9. Effect of stirring speed on microstructure of A356 alloy cast through rheometal process
  10. Phase equilibria of the Mo–Al–Ho ternary system
  11. Experimental investigation of phase equilibria in the Zr–Cu–Ni ternary system
  12. Hot corrosion of the ceramic composite coating Ni3Al–Al2O3–Al2O3/MgO plasma sprayed on 316L stainless steel
  13. Tribological properties of B4C–TiB2–TiC–Ni cermet coating produced by HVOF
  14. Electrochemically fabricated Fe–Ni alloy nanowires and their structural characterization
  15. Short Communications
  16. Synthesis and growth mechanisms of ZrC whiskers fabricated by a VLS process
  17. DGM News
  18. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 15.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111520/pdf?lang=de
Button zum nach oben scrollen