Startseite Effect of molybdenum on the microstructure, mechanical properties and corrosion behavior of Ti alloys
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of molybdenum on the microstructure, mechanical properties and corrosion behavior of Ti alloys

  • Eung-Beom Lee , Mi-Kyung Han , Bong-Jun Kim , Ho-Jun Song und Yeong-Joon Park
Veröffentlicht/Copyright: 15. September 2014
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 105 Heft 9

Abstract

In order to study the effect of Mo on the microstructure, mechanical properties and corrosion behavior of commercially pure titanium (cp-Ti), Ti-xMo (x = 5, 10, 15, and 20 wt.%) alloys were investigated. The phase and microstructures were characterized using X-ray diffraction, optical microscopy, scanning electron microscopy and transmission electron microscopy. The results indicated that the Ti-5Mo alloy was mainly composed of α′ phase with a small fraction of α″ phase. The Ti-10Mo was dominated by orthorhombic α″. The Ti-15Mo alloy was mainly composed of α″ phase with a small fraction of β phase. The volume percentage of the β phase increased with increasing Mo content. The Ti-20Mo alloy was mainly composed of β phase. We also investigated the effect of alloying with Mo on the Vickers hardness and corrosion behavior of Ti-xMo alloys. The addition of Mo not only caused hardening of cp-Ti but also improved its oxidation protective ability. Electrochemical results showed that the Ti-xMo alloys exhibited improved corrosion resistance over cp-Ti.

Keywords: Titanium alloys; Ti–Mo alloys; Corrosion; Microstructure; Mechanical properties
* Correspondence address, Professor Yeong-Joon Park, Department of Dental Materials, School of Dentistry, Chonnam National University, Gwangju 500-757, Korea, Tel: +82-62-530-4871, Fax: +82-62-530-4875, E-mail:

References

[1] C.Leyens, M.Peters: Titanium and titanium alloys, Wiley-VCH, Weinheim (2003). 10.1002/3527602119Suche in Google Scholar

[2] C.Lloyd, S.Scrimgeour, D.Brown, R.Clarke, R.Curtis, P.Hatton, A.Ireland, J.McCabe, J.Nicholson, J.Setcos: J. Dent. 25 (1997) 173. 10.1016/S0300-5712(96)00077-2Suche in Google Scholar

[3] E.Ezugwu, Z.Wang: J. Mater. Process. Technol. 68 (1997) 262. 10.1016/S0924-0136(96)00030-1Suche in Google Scholar

[4] M.Niinomi: Mater. Sci. Eng. A243 (1998) 231. 10.1016/S0921-5093(97)00806-XSuche in Google Scholar

[5] P.Rocher, L.El Medawar, J.Hornez, M.Traisnel, J.Breme, H.Hildebrand: Eur. Cells Mater. 9 (2005) 23.10.22203/eCM.v009a04Suche in Google Scholar PubMed

[6] E.Eisenbarth, D.Velten, M.Müller, R.Thull, J.Breme: Biomaterials25 (2004) 5705. 10.1016/j.biomaterials.2004.01.021Suche in Google Scholar PubMed

[7] A.Cremasco, A.D.Messias, A.R.Esposito, E.A.R.Duek, R.Caram: Mater. Sci. Eng. C31 (2011) 833. 10.1016/j.msec.2010.12.013Suche in Google Scholar

[8] J.A.Davidson, A.K.Mishra, P.Kovacs, R.A.Poggie: Bio-Med. Mater. Eng. 4 (1994) 231. 10.3233/BME-1994-4310Suche in Google Scholar

[9] M.A.Khan, R.L.Williams, D.F.Williams: Biomaterials20 (1999) 631. 10.1016/S0142-9612(98)00217-8Suche in Google Scholar

[10] M.F.Semlitsch, H.Weber, R.M.Streicher, R.Schön: Biomaterials13 (1992) 781. 10.1016/0142-9612(92)90018-JSuche in Google Scholar

[11] H.Tsuchiya, J.M.Macak, A.Ghicov, Y.C.Tang, S.Fujimoto, M.Niinomi, T.Noda, P.Schmuki: Electrochim. Acta52 (2006) 94. 10.1016/j.electacta.2006.03.087Suche in Google Scholar

[12] M.Geetha, A.K.Singh, R.Asokamani, A.K.Gogia: Prog. Mater Sci. 54 (2009) 397. 10.1016/j.pmatsci.2008.06.004Suche in Google Scholar

[13] K.Rajagopalan: Annu. Rev. Nutr. 8 (1988) 401. 10.1146/annurev.nu.08.070188.002153Suche in Google Scholar PubMed

[14] B.K.Burgess: Chem. Rev. 90 (1990) 1377. 10.1021/cr00106a002Suche in Google Scholar

[15] N.Oliveira, A.Guastaldi: Corros. Sci. 50 (2008) 938. 10.1016/j.corsci.2007.09.009Suche in Google Scholar

[16] D.Gordin, T.Gloriant, G.Texier, I.Thibon, D.Ansel, J.Duval, M.Nagel: J. Mater. Sci. Mater. Med. 15 (2004) 885. 10.1023/B:JMSM.0000036276.32211.31Suche in Google Scholar PubMed

[17] C.Li, Y.Zhan, W.Jiang: Mater. Des. 34 (2012) 479. 10.1016/j.matdes.2011.05.031Suche in Google Scholar

[18] S.Nag, R.Banerjee, H.Fraser: Mater. Sci. Eng. C25 (2005) 357. 10.1016/j.msec.2004.12.013Suche in Google Scholar

[19] W. F.Ho: J. Alloys Compd. 464 (2008) 580. 10.1016/j.jallcom.2007.10.054Suche in Google Scholar

[20] M.Sugano, Y.Tsuchida, T.Satake, M.Ikeda: Mater. Sci. Eng. A243 (1998) 163. 10.1016/S0921-5093(97)00795-8Suche in Google Scholar

[21] S.Kumar, T. SankaraNarayanan: J. Alloys Compd. 479 (2009) 699. 10.1016/j.jallcom.2009.01.036Suche in Google Scholar

[22] D.-J.Lin, C.-C.Chuang, J.-H. ChernLin, J.-W.Lee, C.-P.Ju, H.-S.Yin: Biomaterials28 (2007) 2582. 10.1016/j.biomaterials.2007.02.005Suche in Google Scholar PubMed

[23] Y.-Y.Chen, L.-J.Xu, Z.-G.Liu, F.-T.Kong, Z.-Y.Chen: Trans. Nonferrous Met. Soc. 16 (2006) 824. 10.1016/S1003-6326(06)60308-7Suche in Google Scholar

[24] Y.-L.Zhou, D.-M.Luo: Mater. Charact. 62 (2011) 931. 10.1016/j.matchar.2011.07.010Suche in Google Scholar

[25] D.Mareci, R.Chelariu, I.Dan, D.-M.Gordin, T.Gloriant: J. Mater. Sci. Mater. Med. 21 (2010) 2907. 10.1007/s10856-010-4147-9Suche in Google Scholar PubMed

[26] J.L.Murray: Phase diagrams of binary titanium alloys, ASM International, OH (1987). 10.1007/BF02868887Suche in Google Scholar

[27] W.Ho, C.Ju, J. ChernLin: Biomaterials20 (1999) 2115. 10.1016/S0142-9612(99)00114-3Suche in Google Scholar PubMed

[28] N.T.Oliveira, G.Aleixo, R.Caram, A.C.Guastaldi: Mater. Sci. Eng. A452 (2007) 727. 10.1016/j.msea.2006.11.061Suche in Google Scholar

[29] A.Aladjem: J. Mater. Sci. 8 (1973) 688. 10.1007/BF00561225Suche in Google Scholar

[30] X.-B.Chen, Y.-C.Li, J.D.Plessis, P.D.Hodgson, C.Wen: Acta Biomater. 5 (2009) 1808. 10.1016/j.actbio.2009.01.015Suche in Google Scholar PubMed

[31] Z.Gao, Q.Li, F.He, Y.Huang, Y.Wan: Mater. Des. 42 (2012) 13. 10.1016/j.matdes.2012.05.034Suche in Google Scholar

[32] E.McCafferty: Corros. Sci. 47 (2005) 3202. 10.1016/j.corsci.2004.08.016Suche in Google Scholar

[33] C.Shan, X.Hou, K.-L.Choy, P.Choquet: Surf. Coat. Technol. 202 (2008) 2147. 10.1016/j.surfcoat.2007.08.066Suche in Google Scholar

[34] M.Lorenzetti, E.Pellicer, J.Sort, M.D.Baró, J.Kovač, S.Novak, S.Kobe: Materials7 (2014) 180. 10.3390/ma7010180Suche in Google Scholar PubMed PubMed Central

[35] M.Morishita, M.Chikuda, Y.Ashida, M.Morinaga, N.Yukawa, H.Adachi: Mater. Trans. Jim32 (1991) 264. 10.2320/matertrans1989.32.264Suche in Google Scholar

Received: 2014-01-21
Accepted: 2014-04-03
Published Online: 2014-09-15
Published in Print: 2014-09-15

© 2014, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Diffusivities and atomic mobilities of an Sn–Ag–Bi–Cu–Pb melt
  5. Experimental study of the phase relations in the Fe–Cr–Si ternary system at 700°C
  6. Effect of molybdenum on the microstructure, mechanical properties and corrosion behavior of Ti alloys
  7. Mechanism of grain refinement and coarsening in undercooled Ni–Fe alloy
  8. Effects of copper content and liquid separation on the microstructure formation of Co–Cu immiscible alloys
  9. Influence of the solidification temperature range on Gasar structures made from Cu–Mn alloys
  10. Effect of ageing time on mechanical properties and tribological behaviour of aluminium hybrid composite
  11. Microstructure and tensile properties of a friction stir welded Al–Mg–Si alloy
  12. Lüders effect in Al 99.7% extruded via the KoBo method
  13. Reduced graphene oxide nanocomposites with different diameters and crystallinity of TiO2 nanoparticles – synthesis, characterization and photocatalytic activity
  14. Constitutive modelling of mill loads during hot rolling of AISI 321 austenitic stainless steel
  15. X-ray stress measurement with two-dimensional detector based on Fourier analysis
  16. People
  17. People
  18. People
  19. DGM News
  20. Personal
https://doi.org/10.3139/146.111092
Schlagwörter für diesen Artikel
Titanium alloys; Ti–Mo alloys; Corrosion; Microstructure; Mechanical properties

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Diffusivities and atomic mobilities of an Sn–Ag–Bi–Cu–Pb melt
  5. Experimental study of the phase relations in the Fe–Cr–Si ternary system at 700°C
  6. Effect of molybdenum on the microstructure, mechanical properties and corrosion behavior of Ti alloys
  7. Mechanism of grain refinement and coarsening in undercooled Ni–Fe alloy
  8. Effects of copper content and liquid separation on the microstructure formation of Co–Cu immiscible alloys
  9. Influence of the solidification temperature range on Gasar structures made from Cu–Mn alloys
  10. Effect of ageing time on mechanical properties and tribological behaviour of aluminium hybrid composite
  11. Microstructure and tensile properties of a friction stir welded Al–Mg–Si alloy
  12. Lüders effect in Al 99.7% extruded via the KoBo method
  13. Reduced graphene oxide nanocomposites with different diameters and crystallinity of TiO2 nanoparticles – synthesis, characterization and photocatalytic activity
  14. Constitutive modelling of mill loads during hot rolling of AISI 321 austenitic stainless steel
  15. X-ray stress measurement with two-dimensional detector based on Fourier analysis
  16. People
  17. People
  18. People
  19. DGM News
  20. Personal
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 9.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111092/pdf
Button zum nach oben scrollen