Startseite Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive

  • Qingxin Meng , Baoyan Liang , HaiYun Li , Chunhui Su und Songze Jin
Veröffentlicht/Copyright: 17. August 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 104 Heft 2

Abstract

Neodymium-doped yttrium aluminum garnet (Nd:YAG) ceramics were fabricated via a solid-state reaction method using high-purity Y2O3, Al2O3 and Nd2O3 powders as the raw materials. The mixed powder compacts were sintered at 1 750 °C for 5 h under vacuum. The Nd:YAG bulk without doped CaF2 was opaque. A transparent Nd:YAG ceramic was obtained with tiny amounts of CaF2 addition. The bulk had a uniform microstructure containing grains with an average size of 20 μm. No porosity could be detected in the sintered bulk. The maximum optical transmittance of the sample is 44 % in the visible range.

Keywords: CaF2; Sintering; Nd:YAG
* Correspondence address, Prof. Qingxin Meng, Dept. of Materials Science and Engineering, Changchun University of Technology, Changchun, 130022, P. R. China, Tel.:+86-431-85716600, Fax: +86-431-85914756, E-mail:

References

[1] J.R.Lu, T.Murai, K.Takaichi: Adv. Solid State Lasers, 50 (2001) 610.Suche in Google Scholar

[2] J.R.Lu, J.H.Lu, T.Murai: Adv. Solid State Lasers, 68 (2002) 507.Suche in Google Scholar

[3] A.Ikesue, T.Kinoshita, K.Kamata, K.Yoshida: J. Am. Ceram. Soc.78 (1995) 1033. 10.1111/j.1151-2916.1995.tb08433.xSuche in Google Scholar

[4] LeiWen, Xu-DongSun, Wei-MinMa: J. Inorg. Mater.19 (2004) 295.Suche in Google Scholar

[5] X.Li, Q.Li, J.Wang, S.Yang, H.Liu: 10.1016/j.optmat.2005.08.045Suche in Google Scholar

[6] Sang-HoLee, SujarineeKochawattana, G.L.Messing: J. Am. Ceram. Soc.89 (2006) 1945. 10.1111/j.1551-2916.2006.01051.xSuche in Google Scholar

[7] L.Jiang, Q.Fagui, S.Xingwei: J. Fun. Mat.12 (2004) 367.Suche in Google Scholar

[8] Y.Xiong, Z.Y.Fu, H.Wang, Y.C.Wang, Q.J.Zhang: Mater. Sci. Eng. B123 (2005) 57. 10.1016/j.mseb.2005.06.023Suche in Google Scholar

[9] Y.Xiong, Z.Y.Fu, H.Wang: Mater. Sci. Eng. B128 (2006) 7. 10.1016/j.mseb.2005.10.036Suche in Google Scholar

Received: 2008-8-15
Accepted: 2012-7-23
Published Online: 2013-08-17
Published in Print: 2013-02-15

© 2013, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Structure of composites consolidated from ball milled 7475 aluminum alloy and ZrO2 powders
  5. Isothermal section of the Al-Tb-V ternary system at 773 K
  6. Development of an atomic mobility database for disordered and ordered fcc phases in multicomponent Al alloys: focusing on binary systems
  7. Effect of additive and current density on microstructure and texture characteristics of copper electrodeposits
  8. Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy
  9. Effects of BN content on the structural and mechanical properties of a-SiBN ceramics
  10. Structural and relaxor characteristics of Ca0.18Sr0.226Ba0.594Nb2O6
  11. Study on the dielectric properties of CaCu3Ti4O12 ceramics using the one-dimensional Ising model
  12. Erosion wear performance of a surface diffusion alloyed coating on pure magnesium
  13. Evaluation of the quality of cladding deposited on continuous steel casting rolls
  14. Investigating the machinability of austempered ductile irons with dual matrix structures
  15. Simple preperation of CuO nanoparticles and submicron spheres via ultrasonic spray pyrolysis (USP)
  16. Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive
  17. Synthesis and characterization of new Bi2FeNiO6 material using a citric acid assisted gel combustion technique
  18. Processing and characterization of up-converting Er3+ doped (Lu0.5Y0.5)2O3 nanophosphor
  19. People
  20. People
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.110847
Schlagwörter für diesen Artikel
CaF2; Sintering; Nd:YAG

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Structure of composites consolidated from ball milled 7475 aluminum alloy and ZrO2 powders
  5. Isothermal section of the Al-Tb-V ternary system at 773 K
  6. Development of an atomic mobility database for disordered and ordered fcc phases in multicomponent Al alloys: focusing on binary systems
  7. Effect of additive and current density on microstructure and texture characteristics of copper electrodeposits
  8. Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy
  9. Effects of BN content on the structural and mechanical properties of a-SiBN ceramics
  10. Structural and relaxor characteristics of Ca0.18Sr0.226Ba0.594Nb2O6
  11. Study on the dielectric properties of CaCu3Ti4O12 ceramics using the one-dimensional Ising model
  12. Erosion wear performance of a surface diffusion alloyed coating on pure magnesium
  13. Evaluation of the quality of cladding deposited on continuous steel casting rolls
  14. Investigating the machinability of austempered ductile irons with dual matrix structures
  15. Simple preperation of CuO nanoparticles and submicron spheres via ultrasonic spray pyrolysis (USP)
  16. Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive
  17. Synthesis and characterization of new Bi2FeNiO6 material using a citric acid assisted gel combustion technique
  18. Processing and characterization of up-converting Er3+ doped (Lu0.5Y0.5)2O3 nanophosphor
  19. People
  20. People
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110847/pdf?lang=de
Button zum nach oben scrollen