Home Technology Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy
Article
Licensed
Unlicensed Requires Authentication

Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy

  • Xiaoyan Deng and Chengwen Qiang
Published/Copyright: August 17, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 104 Issue 2

Abstract

FeCo alloy coatings were successfully prepared on carbon fiber surfaces by means of electroplating at 25 °C for 480 s. The structures and morphologies of the composite were characterized using X-ray diffraction and scanning electron microscopy. The coercivity (Hc) and saturation magnetization (Hs) of the FeCo/CF composites are 141.9 Oe and 100.5 emu · g−1. The reflectivity of FeCo/CF composites is less than–5 dB over the range of 1.1 to 5.4 GHz. The reflectivity of FeCo/CF composites is less than–10 dB over the range of 1.6–2.1 GHz. The lowest reflectivity of the FeCo/CF composites is −14.7 dB at 2.0 GHz and the corresponding thickness is 3.3 mm.

Keywords: FeCo alloy; Carbon fiber; Electrodeposition; Microwave absorbing materials
* Correspondence address, Chengwen Qiang, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000China, Tel.: +86-931-4969183, E-mail:

References

[1] G.Q.Wang, X.D.Chen, Y.P.Duan, S.H.Liu: J. Alloys Compd.454 (2008) 340. 10.1016/j.jallcom.2006.12.077Search in Google Scholar

[2] C.W.Qiang, J.C.Xu, Z.Q.Zhang, L.L.Tian, S.T.Xiao, Y.Liu, P.Xu: J. Alloys Compd.506 (2010) 93. 10.1016/j.jallcom.2010.06.193Search in Google Scholar

[3] Y.J.Chen, M.S.Cao, T.H.Wang, Q.Wan: Appl. Phys. Lett.84 (2004) 3367. 10.1063/1.1702134Search in Google Scholar

[4] K.Hatakeyama, T.Inui: IEEE Trans. Magn.20 (1984) 1261. 10.1109/TMAG.1984.1063424Search in Google Scholar

[5] J.B.Donnet, R.C.Bansal, M.J.Wang, Carbon Fibers, 3rd ed., Marcel Dekker, New York, (1990), p. 57.Search in Google Scholar

[6] J.Zeng, J.C.Xu: J. Alloys Compd.493 (2010) 39. 10.1016/j.jallcom.2009.12.192Search in Google Scholar

[7] J.Zeng, J.C.Xu, P.Tao, W.Hua: J. Alloy Compd.487 (2009) 304. 10.1016/j.jallcom.2009.07.112Search in Google Scholar

[8] J.Zeng, J.C.Xu: Mater. Charact.60 (2009) 1068. 10.1016/j.matchar.2009.03.012Search in Google Scholar

[9] Y.Z.Fan, H.B.Yang, X.Z.Liu, H.Y.Zhou, G.T.Zou: J. Alloys Compd.461 (2008) 490. 10.1016/j.jallcom.2007.07.034Search in Google Scholar

[10] Y.Q.Kang, M.S.Gao, J.Yuan, L.Zhang, B.Wen, X.Y.Fa: J. Alloys Compd.495 (2010) 259. 10.1016/j.jallcom.2010.01.143Search in Google Scholar

[11] Y.Liu, J.Zhang, L.Yu, G.Jia, Y.Zhang, X.Wang, S.Cao: Curr. Appl. Phys.4 (2004) 455. 10.1016/j.cap.2004.02.001Search in Google Scholar

[12] I.Shao, L.T.Romankiw, C.Bonhote: J. Cyrstal Growth312 (2010) 1262. 10.1016/j.jcrysgro.2009.11.061Search in Google Scholar

[13] I.Shao, P.M.Vereecken, C.L.Chien, R.C.Cammarata, P.C.Searso: J. Electrochem. Soc.150 (2007) D572. 10.1149/1.2772201Search in Google Scholar

[14] A.Sahari, A.Azizi, G.Schmerber, M.Abes, J.P.Bucher, A.Dinia: Catal. Today113 (2006) 257. 10.1016/j.cattod.2005.11.075Search in Google Scholar

[15] Y.X.Gong, L.Zhen, J.T.Jiang, C.Y.Xu, W.S.Shao: J. Magn. Magn. Mater.321 (2009) 3702. 10.1016/j.jmmm.2009.07.019Search in Google Scholar

[16] Y.Yang, C.Xu, Y.Xia, T.Wang, F.Li: J. Alloys Compd.493 (2010) 549. 10.1016/j.jallcom.2009.12.153Search in Google Scholar

[17] Z.Han, D.Li, H.Wang, X.G.Liu, J.Li, D.Y.Geng: Appl. Phys. Lett.95 (2009) 023114. 10.1063/1.3177067Search in Google Scholar

[18] C.Wang, R.Lv, Z.H.Huang, F.Y.Kang, J.L.Gu: J. Alloys Compd.509 (2011) 494. 10.1016/j.jallcom.2010.09.078Search in Google Scholar

[19] G.Xie, Z.Wang, Z.Cui, Y.Shi: Carbon43 (2005) 3181. 10.1016/j.carbon.2005.07.024Search in Google Scholar

[20] Y.Tang, L.Liu, Y.Wu, H.Zhao, W.Hu: Mater. Lett.61 (2007) 1307. 10.1016/j.matlet.2006.07.019Search in Google Scholar

[21] S.Aria, M.Endo: Electrochem. Commun.5 (2003) 797. 10.1016/j.elecom.2003.08.002Search in Google Scholar

[22] Y.Yang, B.Zhang, W.Xu, Y.Shi, Z.Jiang, N.Zhou: J. Magn. Magn. Mater.256 (2003) 129. 10.1016/S0304-8853(02)00436-5Search in Google Scholar

[23] C.W.Qiang, J.C.Xu, S.T.Xiao, Y.J.Jiao, Z.Q.Zhang, Y.Liu, L.L.Tian: Z.G. Zhou: Appl. Surf. Sci.257 (2010) 1371. 10.1016/j.apsusc.2010.08.070Search in Google Scholar

[24] Y.Yang, C.L.Xu, Y.X.Xia, T.Wang, F.S.Li: J. Alloys Compd.493 (2010) 549. 10.1016/j.jallcom.2009.12.153Search in Google Scholar

[25] S.B.Ni, X.H.Wang, G.Zhou, F.Yang, J.M.Wang, D.Y.He: J. Alloy Compd.489 (2010) 252. 10.1016/j.jallcom.2009.09.065Search in Google Scholar

[26] T.Homma, A.Tamaki, H.Nakai, T.Osaka: J. Electroanal. Chem.559 (2003) 131. 10.1016/S0022-0728(03)00042-1Search in Google Scholar

[27] Q.L.Liu, D.Zhang, T.X.Fan: Appl. Phys. Lett.93 (2008) 013110. 10.1063/1.2957035Search in Google Scholar

[28] Y.B.Feng, T.Qiu, C.Y.Shen: J. Man. Man. Mater.318 (2007) 8. 10.1016/j.jmmm.2007.04.012Search in Google Scholar

[29] N.Q.Zhao, T.C.Zou, C.S.Shi, J.J.Li, W.K.Guo: Mater. Sci. Eng. B127 (2006) 207. 10.1016/j.mseb.2005.10.026Search in Google Scholar

Received: 2011-8-6
Accepted: 2012-7-16
Published Online: 2013-08-17
Published in Print: 2013-02-15

© 2013, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Structure of composites consolidated from ball milled 7475 aluminum alloy and ZrO2 powders
  5. Isothermal section of the Al-Tb-V ternary system at 773 K
  6. Development of an atomic mobility database for disordered and ordered fcc phases in multicomponent Al alloys: focusing on binary systems
  7. Effect of additive and current density on microstructure and texture characteristics of copper electrodeposits
  8. Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy
  9. Effects of BN content on the structural and mechanical properties of a-SiBN ceramics
  10. Structural and relaxor characteristics of Ca0.18Sr0.226Ba0.594Nb2O6
  11. Study on the dielectric properties of CaCu3Ti4O12 ceramics using the one-dimensional Ising model
  12. Erosion wear performance of a surface diffusion alloyed coating on pure magnesium
  13. Evaluation of the quality of cladding deposited on continuous steel casting rolls
  14. Investigating the machinability of austempered ductile irons with dual matrix structures
  15. Simple preperation of CuO nanoparticles and submicron spheres via ultrasonic spray pyrolysis (USP)
  16. Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive
  17. Synthesis and characterization of new Bi2FeNiO6 material using a citric acid assisted gel combustion technique
  18. Processing and characterization of up-converting Er3+ doped (Lu0.5Y0.5)2O3 nanophosphor
  19. People
  20. People
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.110840
Keywords for this article
FeCo alloy; Carbon fiber; Electrodeposition; Microwave absorbing materials

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Structure of composites consolidated from ball milled 7475 aluminum alloy and ZrO2 powders
  5. Isothermal section of the Al-Tb-V ternary system at 773 K
  6. Development of an atomic mobility database for disordered and ordered fcc phases in multicomponent Al alloys: focusing on binary systems
  7. Effect of additive and current density on microstructure and texture characteristics of copper electrodeposits
  8. Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy
  9. Effects of BN content on the structural and mechanical properties of a-SiBN ceramics
  10. Structural and relaxor characteristics of Ca0.18Sr0.226Ba0.594Nb2O6
  11. Study on the dielectric properties of CaCu3Ti4O12 ceramics using the one-dimensional Ising model
  12. Erosion wear performance of a surface diffusion alloyed coating on pure magnesium
  13. Evaluation of the quality of cladding deposited on continuous steel casting rolls
  14. Investigating the machinability of austempered ductile irons with dual matrix structures
  15. Simple preperation of CuO nanoparticles and submicron spheres via ultrasonic spray pyrolysis (USP)
  16. Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive
  17. Synthesis and characterization of new Bi2FeNiO6 material using a citric acid assisted gel combustion technique
  18. Processing and characterization of up-converting Er3+ doped (Lu0.5Y0.5)2O3 nanophosphor
  19. People
  20. People
  21. DGM News
  22. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 19.2.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.110840/html
Scroll to top button