Structural and relaxor characteristics of Ca0.18Sr0.226Ba0.594Nb2O6
-
K. R. S. Preethi Meher
Abstract
Polycrystalline Ca0.18Sr0.226Ba0.594Nb2O6 (CSBN18) was synthesized via the solid-state reaction route. X-ray structural studies confirmed it belonged to the tetragonal tungsten bronze family. Rietveld refinement of the X-ray data has been carried out for CSBN18 where the atomic positions and site occupancy factors for A-sites have been determined. The dielectric properties of CSBN18 ceramic were studied as a function of temperature in the 100 Hz–1 MHz frequency range. The dielectric relaxation followed the Vogel–Fulcher relation wherein Ea = 37.4 meV; Tf = 131.5 °C and ω0 = 4.31 × 109 rad s−1. A high pyroelectric coefficient of ∼ 250 μC m−2.K was obtained around the transition temperature (∼150 °C). This is significantly higher than that reported for polycrystalline SrxBa1-xNb2O6 (SBN). However, the piezoelectric coefficient (d33) of the title composition was as low as 6 pC N−1.
References
[1] C.Elissalde, J.Ravez: J. Mater. Chem.10 (2000) 681. 10.1039/a908893hSuche in Google Scholar
[2] V.A.Stephanovich: J. Phys: Condens. Matter22 (2010) 235902. PMid: 21393771; 10.1088/0953-8984/22/23/235902Suche in Google Scholar PubMed
[3] K.Matyjasek, K.Repow, S.M.Kaczmarek, M.Berkowski: J. Phys: Condens. Matter19 (2007) 466207. 10.1088/0953-8984/19/46/466207Suche in Google Scholar
[4] M.P.Trubelja, E.Ryba, D.K.Smith: J. Mater. Sci., 31 (1996) 1435. 10.1007/BF00357850Suche in Google Scholar
[5] Myoung-SupKim, PengWang, Joon-HyungLee, Jeong-JooKim, Hee-YoungLee, Sang-HeeCho: Jpn. J. Appl. Phys.41 (2002) 7042. 10.1143/JJAP.41.7042Suche in Google Scholar
[6] A.A.Bokov, Z.-G.Ye: J. Mater. Sci.41 (2006) 31. 10.1007/s10853-005-5915-7Suche in Google Scholar
[7] P.B.Jamieson, S.C.Abrahams, J.L.Bernstein: J. Chem. Phys.48 (1968) 5048. 10.1063/1.1668176Suche in Google Scholar
[8] L.E.Cross: Ferroelectrics76 (1987) 241. 10.1080/00150198708016945Suche in Google Scholar
[9] R.R.Neurgaonkar, W.F.Hall, J.R.Oliver, W.W.Ho, W.K.Cory: Ferroelectrics87 (1988) 167. 10.1080/00150198808201379Suche in Google Scholar
[10] M.Mühlberg, M.Burianek, B.Joschko, D.Klimm, A.Danilewsky, M.Gelissen, L.Bayarjargal, G.P.Gorler, B.O.Hildmanne: J. Cryst. Growth310 (2008) 2288. 10.1016/j.jcrysgro.2007.12.023Suche in Google Scholar
[11] J.G.Carrio, Y.P.Mascarenhas, W.Yelon, I.A.Santos, D.Garcia, J.A.Eiras: Mater. Res.5 (2002) 57. 10.1590/S1516-14392002000100010Suche in Google Scholar
[12] J.T.Lewandowski, I.J.Pickering, A.J.Jacobson: Mater. Res. Bull.27 (1992) 981. 10.1016/0025-5408(92)90199-ASuche in Google Scholar
[13] S.Podlozhenov, H.A.Graetsch, J.Schneider, M.Ulex, M.Wöhlecke, K.Betzler: Acta Crystallographica B62 (2006) 960. PMid: 17108647; 10.1107/S0108768106038869Suche in Google Scholar
[14] T.S.Chernaya, B.A.Maksimov, T.R.Volk, L.I.Ivleva, V.I.Simonov: Phys. Solid State, 42 (2000) 1668. 10.1134/1.1309457Suche in Google Scholar
[15] S.M.Pilgrim, A.E.Sutherland, S.R.Winzer: J. Am. Ceram. Soc.73 (1990) 3122. 10.1111/j.1151-2916.1990.tb06733.xSuche in Google Scholar
[16] Y.Q.Qu, A.-D.Li, Q.-Y.Shao, Y.F.Tang, DiWu, C.L.Mak, K.H.Wong, N.-B.Ming: Mat. Res. Bull.37 (2002) 503. 10.1016/S0025-5408(02)00676-1Suche in Google Scholar
[17] S.-M.Ke, H.Q.Fan, H.-T.Huang, H.L.W.Chan, S.H.Yu: J. Appl. Phys.104 (2008) 024101. 10.1063/1.2956615Suche in Google Scholar
[18] H.L.Song, H.J.Zhang, Q.Z.Jiang, X.G.Xu, C. J.Lu, X. B.Hu, J.Y.Wang, M. H.Jiang, J. Cryst. Growth, 290 (2006) 431. 10.1016/j.jcrysgro.2006.01.010Suche in Google Scholar
[19] Y.J.Qi, C.J.Lu, J.Zhu and X.B.Chen, Yangz, L.Song, H.J.Zhang, X.G.Xu: App. Phys. Lett.87 (2005) 082904. 10.1063/1.2010614Suche in Google Scholar
[20] M.Eßer, M.Burianek, D.Klimm, M. Mühlberg: J. Cryst. Growth240 (2002) 1.Suche in Google Scholar
[21] D.U.P.Spinola, E.N.Moreira, L.A.Bhsora, I.A.Eiras, D.Garcia: IEEE Ultrasonics symposium (1996) 523.Suche in Google Scholar
© 2013, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Structure of composites consolidated from ball milled 7475 aluminum alloy and ZrO2 powders
- Isothermal section of the Al-Tb-V ternary system at 773 K
- Development of an atomic mobility database for disordered and ordered fcc phases in multicomponent Al alloys: focusing on binary systems
- Effect of additive and current density on microstructure and texture characteristics of copper electrodeposits
- Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy
- Effects of BN content on the structural and mechanical properties of a-SiBN ceramics
- Structural and relaxor characteristics of Ca0.18Sr0.226Ba0.594Nb2O6
- Study on the dielectric properties of CaCu3Ti4O12 ceramics using the one-dimensional Ising model
- Erosion wear performance of a surface diffusion alloyed coating on pure magnesium
- Evaluation of the quality of cladding deposited on continuous steel casting rolls
- Investigating the machinability of austempered ductile irons with dual matrix structures
- Simple preperation of CuO nanoparticles and submicron spheres via ultrasonic spray pyrolysis (USP)
- Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive
- Synthesis and characterization of new Bi2FeNiO6 material using a citric acid assisted gel combustion technique
- Processing and characterization of up-converting Er3+ doped (Lu0.5Y0.5)2O3 nanophosphor
- People
- People
- DGM News
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Structure of composites consolidated from ball milled 7475 aluminum alloy and ZrO2 powders
- Isothermal section of the Al-Tb-V ternary system at 773 K
- Development of an atomic mobility database for disordered and ordered fcc phases in multicomponent Al alloys: focusing on binary systems
- Effect of additive and current density on microstructure and texture characteristics of copper electrodeposits
- Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy
- Effects of BN content on the structural and mechanical properties of a-SiBN ceramics
- Structural and relaxor characteristics of Ca0.18Sr0.226Ba0.594Nb2O6
- Study on the dielectric properties of CaCu3Ti4O12 ceramics using the one-dimensional Ising model
- Erosion wear performance of a surface diffusion alloyed coating on pure magnesium
- Evaluation of the quality of cladding deposited on continuous steel casting rolls
- Investigating the machinability of austempered ductile irons with dual matrix structures
- Simple preperation of CuO nanoparticles and submicron spheres via ultrasonic spray pyrolysis (USP)
- Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive
- Synthesis and characterization of new Bi2FeNiO6 material using a citric acid assisted gel combustion technique
- Processing and characterization of up-converting Er3+ doped (Lu0.5Y0.5)2O3 nanophosphor
- People
- People
- DGM News
- DGM News