Home Erosion wear performance of a surface diffusion alloyed coating on pure magnesium
Article
Licensed
Unlicensed Requires Authentication

Erosion wear performance of a surface diffusion alloyed coating on pure magnesium

  • Youping Ma , Xiulan Li and Lei Yang
Published/Copyright: August 17, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 104 Issue 2

Abstract

Diffusion alloying processing is an emerging, environmentally friendly, surface engineering technique. In this study, we have utilized diffusion alloying processing to alloy aluminum and zinc mixed powder on pure magnesium for erosion wear protection. A stirring device was used for erosion testing. The treated and untreated samples were immersed in oil slurry and water slurry with quartz sand in suspension and rotated at a given speed. Scanning electron microscopy and X-ray diffraction were used to study the surface morphology and chemical composition of the coatings before and after erosion testing.

Keywords: Diffusion alloying processing; Pure magnesium; Aluminum; Zinc; Erosion wear
* Correspondence address, Youping Ma, School of Metallurgical Engineering, Xi'an University of Architecture & Technology, Xi'an 710055, China, Tel.: 86-029-82201289, E-mail:

References

[1] M.M.Avedesian, H.Baker: Magnesium and Magnesium Alloys, ASM International, Ohio (1999).Search in Google Scholar

[2] XiaoxiaJiang, ShizhuoLi, ShuLi: Corrosion and wearing of metal material, Beijing Chemical Industry Press, Beijing (2003).Search in Google Scholar

[3] N.Yamauchi, K.Demizu, N.Ueda, N.K.Cuong: Surf. Coat. Tech.193 (2005) 277. 10.1016/j.surfcoat.2004.07.056Search in Google Scholar

[4] G.Song, A.Atrens, M.Dargusch: Corros. Sci.41 (1999) 249. 10.1016/S0010-938X(98)00121-8Search in Google Scholar

[5] S.Durdu, A.Aytac, M.Usta: J. Alloy. Compd.509 (2011) 8601. 10.1016/j.jallcom.2011.06.059Search in Google Scholar

[6] Md.Bhuiyan, Y.Ostuka: Mater. Sci. Eng A527 (2010) 4978.Search in Google Scholar

[7] G.Reiners, M.Griepentrog: Surf. Coat. Tech.26 (1995) 308.Search in Google Scholar

[8] F.Stippich, E.Vera, G.K.Wolf, G.Berg, Chr.Friedrich: Surf. Coat. Tech.20 (1998) 29. 10.1016/S0257-8972(98)00365-XSearch in Google Scholar

[9] A.Yamamoto, A.Watanabe, K.Sugahara, H.Tsubakino: Scripta. Mater.30 (2001) 1039. 10.1016/S1359-6462(01)00662-5Search in Google Scholar

[10] V.T.Truong, P.K.Lai, B.T.Moore, R.F.Muscat: Synthetic. Met.15 (2000) 7. 10.1016/S0379-6779(99)00174-5Search in Google Scholar

[11] A.L.Rudd, C.B.Breslin, F.Mansfeld: Corros. Sci.2 (2000) 27.Search in Google Scholar

[12] C.Y.Wang, P.Yao, D.H.Bradhurst, H.K.Liu, S.X.Dou: J. Alloy. Compd.1 (1999) 267. 10.1016/S0925-8388(98)00954-2Search in Google Scholar

[13] I.Nakatsugawa: International Magnesium Association3 (1996) 24.Search in Google Scholar

[14] RuizhenXu, GuosongWu, XiongboYang: Mater. Lett.65 (2011) 2171. 10.1016/j.matlet.2011.04.043Search in Google Scholar

[15] J.Hu, Q.Li, X.Zhong: Thin Solid Films519 (2010) 1361. 10.1016/j.tsf.2010.09.014Search in Google Scholar

[16] J.E.Gray, B.Luan: J. Alloy. Compd.1 (2002) 88. 10.1016/S0925-8388(01)01899-0Search in Google Scholar

[17] Y.P.Ma, J.Li, J.Zhu, L.Yang, Y.G.Liu, Z.Y.Li: Acta. Metall. Sin.1 (2007) 72. 10.1016/S1006-7191(07)60010-6Search in Google Scholar

[18] ZhenningWu, PeijieLi, ShuxunLiu: Foundry3 (1988) 281.Search in Google Scholar

Received: 2010-8-15
Accepted: 2012-7-16
Published Online: 2013-08-17
Published in Print: 2013-02-15

© 2013, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Structure of composites consolidated from ball milled 7475 aluminum alloy and ZrO2 powders
  5. Isothermal section of the Al-Tb-V ternary system at 773 K
  6. Development of an atomic mobility database for disordered and ordered fcc phases in multicomponent Al alloys: focusing on binary systems
  7. Effect of additive and current density on microstructure and texture characteristics of copper electrodeposits
  8. Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy
  9. Effects of BN content on the structural and mechanical properties of a-SiBN ceramics
  10. Structural and relaxor characteristics of Ca0.18Sr0.226Ba0.594Nb2O6
  11. Study on the dielectric properties of CaCu3Ti4O12 ceramics using the one-dimensional Ising model
  12. Erosion wear performance of a surface diffusion alloyed coating on pure magnesium
  13. Evaluation of the quality of cladding deposited on continuous steel casting rolls
  14. Investigating the machinability of austempered ductile irons with dual matrix structures
  15. Simple preperation of CuO nanoparticles and submicron spheres via ultrasonic spray pyrolysis (USP)
  16. Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive
  17. Synthesis and characterization of new Bi2FeNiO6 material using a citric acid assisted gel combustion technique
  18. Processing and characterization of up-converting Er3+ doped (Lu0.5Y0.5)2O3 nanophosphor
  19. People
  20. People
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.110841
Keywords for this article
Diffusion alloying processing; Pure magnesium; Aluminum; Zinc; Erosion wear

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Structure of composites consolidated from ball milled 7475 aluminum alloy and ZrO2 powders
  5. Isothermal section of the Al-Tb-V ternary system at 773 K
  6. Development of an atomic mobility database for disordered and ordered fcc phases in multicomponent Al alloys: focusing on binary systems
  7. Effect of additive and current density on microstructure and texture characteristics of copper electrodeposits
  8. Magnetic properties and microwave absorption properties of carbon fibers coated with FeCo alloy
  9. Effects of BN content on the structural and mechanical properties of a-SiBN ceramics
  10. Structural and relaxor characteristics of Ca0.18Sr0.226Ba0.594Nb2O6
  11. Study on the dielectric properties of CaCu3Ti4O12 ceramics using the one-dimensional Ising model
  12. Erosion wear performance of a surface diffusion alloyed coating on pure magnesium
  13. Evaluation of the quality of cladding deposited on continuous steel casting rolls
  14. Investigating the machinability of austempered ductile irons with dual matrix structures
  15. Simple preperation of CuO nanoparticles and submicron spheres via ultrasonic spray pyrolysis (USP)
  16. Fabrication of transparent Nd:YAG ceramic by vacuum sintering with CaF2 additive
  17. Synthesis and characterization of new Bi2FeNiO6 material using a citric acid assisted gel combustion technique
  18. Processing and characterization of up-converting Er3+ doped (Lu0.5Y0.5)2O3 nanophosphor
  19. People
  20. People
  21. DGM News
  22. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 16.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.110841/html
Scroll to top button