Startseite The nature of the TRIP-effect in metastable austenitic steels
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

The nature of the TRIP-effect in metastable austenitic steels

Dedicated to Professor Eckard Macherauch on the occasion of the 80th anniversary of his birth
  • Heinrich Oettel und Ulrich Martin
Veröffentlicht/Copyright: 31. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 97 Heft 12

Abstract

The TRIP-effect in metastable austenitic steels is caused by a moderate local martensitic transformation, influencing both the strain hardening and the damage behaviour. The main conditions of a marked TRIP-effect are a low flow stress in the undeformed state, a high strain hardening exponent, a continuous martensitic transformation up to about 20% and a high resistance to damage (e.g. crack formation and propagation). The martensite transformation starts in glide or shear bands and their intersections even at temperatures clearly above the conventional Md-temperatures, reducing the local stress concentrations and so preventing the onset of damage. Furthermore, high martensite content can be detected along the fracture path impeding the crack propagation by the transformation. To demonstrate the influence of damage on the TRIP-effect the deviations from the so-called Considere-criterion for maximum uniform elongation can be used.

Keywords: Plasticity; Martensitic transformation; Austenitic steel; Deformation damage
* Correspondence address, Prof. Dr.-Ing. Heinrich Oettel, Institut für Werkstoffwissenschaft der TU Bergakademie Freiberg, Gustav-Zeunerstr. 5, D-09596 Freiberg, Germany, Tel.: +493731392617, Fax: +493731393657. E-mail:

Refrences

[1] G.Wassermann: Arch. Eisenhüttenw.10 (1937) 321.10.1002/srin.193700538Suche in Google Scholar

[2] V.F.Zackay, E.R.Parker, D.Fahr, R.Bush: Trans. ASM60 (1967) 252.Suche in Google Scholar

[3] I.Tamura: Metal Science16 (1982) 245.10.1179/030634582790427316Suche in Google Scholar

[4] M.Cherakoui, M.Berveiller: Zeitschrift für Angew. Math. Mech.80 (2000) 219.Suche in Google Scholar

[5] R.G.Stringfellow, D.M.Parks, G.B.Olson: Acta Metall. Mater.40 (1992) 1703.Suche in Google Scholar

[6] H.Becker, H.Brandis, W.Küppers: Thyssen Edelstahl Technische Berichte, 12. Band, Heft 1 (1986) 35.Suche in Google Scholar

[7] H.Oettel, U.Martin, M.Onyuna, A.Weiß: Adv. Eng. Mater.6 (2004) 529.Suche in Google Scholar

[8] F.D.Fischer, Q.P.Sun, K.Tanaka: Appl. Mech. Rev.49 (1996) 317.Suche in Google Scholar

[9] F.D.Fischer, G.Reisner, E.Werner, K.Tanaka, G.Cailletaud, T.Antretter: Int. J. Plasticity16 (2000) 723.Suche in Google Scholar

[10] N.Tsuchida, Y.Tomota: Mat. Sci. Eng.A285 (2000) 345.Suche in Google Scholar

[11] S.Papaefthymiou, W.Bleck, U.Prahl, C.Acht, J.Sietsma, S.van der Zwaag: Materials Sci. Forum Metals426–432 (2003) 1355.Suche in Google Scholar

[12] P.Jacques, Q.Furnemont, T.Pardoen, F.Delannay: Acta Mater.49 (2001) 139.Suche in Google Scholar

[13] W.Bleck: Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, Gent, (2002) 13.Suche in Google Scholar

[14] G. B.Olson, M.Cohen, Metallurgical Transactions A6 (1975) 791.10.1007/BF02672301Suche in Google Scholar

[15] A.Weiß, P.R.Scheller, H.Gutte: Steel Grips1 (2003) 4, 284.Suche in Google Scholar

[16] V.Schoß: Dissertation, TU Bergakademie Freiberg, 2000.Suche in Google Scholar

[17] Y.Nakasone, Y.Iwasaki, T.Shimizu, S.Kasumi: Engin. Materials243–244 (2003) 327.Suche in Google Scholar

[18] D.Barenbrock: VDI Fortschrittsberichte, Reihe5, Nr. 659 (2002).Suche in Google Scholar

[19] W.S.Kranz: Dissertation RWTH Aachen (1999).Suche in Google Scholar

[20] T.Nebel, U.Martin, D.Eifler: HTM56 (2001) 314.Suche in Google Scholar

[21] G.W.Greenwood, R.H.Johnson: Proc. Roy. Soc.A283 (1965) 403.Suche in Google Scholar

[22] F.GüntherK.Höhne, H.Oettel, M.Urban: VII. Conf. Appl. Cryst. Kozubnik (1974) 118.Suche in Google Scholar

[23] H.Schumann: Neue Hütte17 (1972) 203.Suche in Google Scholar

[24] O.Bouaziz, N.Guelton: Mater. Sci. Eng.A319–321 (2001) 246.Suche in Google Scholar

[25] D.P.Koistinen, R.E.Marburger: Acta Met.7 (1959) 59.Suche in Google Scholar

[26] G.Besserdich: Dissertation Universität Karlsruhe (TH), 1993Suche in Google Scholar

[27] K.Tanaka: Comp. Plasticity7 (1991) 43.10.1002/scj.4690210705Suche in Google Scholar

[28] D.C.Ludwigson, J.A.Berger: J. Iron Steel Inst.207 (1969) 63.Suche in Google Scholar

[29] M.Glavatskikh, H.Oettel, U.Martin, S.Nikulin: Mat.-wiss.u. Werkstofftech. (2006) in press.Suche in Google Scholar

[30] L.M.Kachanov: Introduction to Continuum Damage Mechanics; Kluewer Aress 1986; in: H.Altenbach (Ed.), Werkstoffmechanik, Dt. Verlag für Grundstoffindustrie, Leipzig (1993).Suche in Google Scholar

[31] W.Schmidt, W.Gebel: Draht41 (1990) 5, 579.Suche in Google Scholar

[32] A.Behrens, H.Just: Steel Res. Int.76 (2005) 210.Suche in Google Scholar

Received: 2006-5-24
Accepted: 2006-9-11
Published Online: 2013-05-31
Published in Print: 2006-12-01

© 2006, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Microcracks in superalloys: From local in-situ measurements to lifetime prediction
  5. Residual stress development due to thermal cycling of the particle-reinforced alloy EN AW-6061– experiment and simulation
  6. Analysis of defect configurations with positron lifetime measurements by pulsed low energy beams
  7. The nature of the TRIP-effect in metastable austenitic steels
  8. Investigation and modelling of theplasticity-induced martensite formation in metastable austenites
  9. Thermal relaxation of residual stresses in TiN films deposited by arc ion plating
  10. On the Hall–Petch relation between flow stress and grain size
  11. Polymer-derived Si–C–N ceramics reinforced by single-wall carbon nanotubes
  12. Applied
  13. Strengthening of silicon nitride ceramics by shot peening
  14. Assessment of creep behaviour of the die-cast cylinder-head alloy AlSi6Cu4-T6
  15. New aspects of bending rotation fatigue in ultra-fine-grained pseudo-elastic NiTi wires
  16. Anwendung des lokalen Dauerfestigkeitskonzepts zur Bewertung der Wirksamkeit von Schweißnahtnachbehandlungsmaßnahmen
  17. Investigation of the thermoelastic response of long-fibre reinforced thermoplasticsby comparison with different non-contactstrain measurement techniques
  18. Effect of surface roughening on increasingthe spectral selectivity of cermet solarselective absorbers
  19. Experimental observations on thecorrelation between microstructure andfracture of multiphase steels
  20. Pressure solidification – a novel moulding technique for plastic parts with superior dimensional stability
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.101395
Schlagwörter für diesen Artikel
Plasticity; Martensitic transformation; Austenitic steel; Deformation damage

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Microcracks in superalloys: From local in-situ measurements to lifetime prediction
  5. Residual stress development due to thermal cycling of the particle-reinforced alloy EN AW-6061– experiment and simulation
  6. Analysis of defect configurations with positron lifetime measurements by pulsed low energy beams
  7. The nature of the TRIP-effect in metastable austenitic steels
  8. Investigation and modelling of theplasticity-induced martensite formation in metastable austenites
  9. Thermal relaxation of residual stresses in TiN films deposited by arc ion plating
  10. On the Hall–Petch relation between flow stress and grain size
  11. Polymer-derived Si–C–N ceramics reinforced by single-wall carbon nanotubes
  12. Applied
  13. Strengthening of silicon nitride ceramics by shot peening
  14. Assessment of creep behaviour of the die-cast cylinder-head alloy AlSi6Cu4-T6
  15. New aspects of bending rotation fatigue in ultra-fine-grained pseudo-elastic NiTi wires
  16. Anwendung des lokalen Dauerfestigkeitskonzepts zur Bewertung der Wirksamkeit von Schweißnahtnachbehandlungsmaßnahmen
  17. Investigation of the thermoelastic response of long-fibre reinforced thermoplasticsby comparison with different non-contactstrain measurement techniques
  18. Effect of surface roughening on increasingthe spectral selectivity of cermet solarselective absorbers
  19. Experimental observations on thecorrelation between microstructure andfracture of multiphase steels
  20. Pressure solidification – a novel moulding technique for plastic parts with superior dimensional stability
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.101395/pdf?lang=de
Button zum nach oben scrollen