Contents

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. Experimental determination of a representative texture and insight into the range of significant neighboring grain interactions via orientation and misorientation statistics
5. Methods of segregation analysis applied to simulated multicomponent multiphase microstructures
6. Nanoindentation responses of Si–Ge multilayers
7. Microstructural and thermodynamic investigations on friction stir welded Mg/Al-joints
8. Ingot metallurgy and microstructural characterization of Ti–Ta alloys
9. Microstructural evolution of aluminium–copper alloys during the downward directional solidification process
10. Indium ion cementation onto aluminum plates in hydrochloric acid solutions: a kinetic perspective
11. Development of Sn–Cu–Sb alloys for making lead- and bismuth-free pewter
12. The effect of Sn addition and sulfide ion concentration on the corrosion behavior of Cu-35Zn in NaCl solution
13. Synthesis and characteristics of precipitation hardened Cu–Cr alloy and multiply hardened Cu–Cr–Al₂O₃ nanocomposite obtained using powder metallurgy techniques
14. Effect of rhenium addition on the strengthening of chromium–alumina composite materials
15. Grain growth and sinterability in Er₂O₃-doped cubic zirconia (c-ZrO₂)
16. Short Communications
17. Properties of aluminium coatings produced using manual and robotized flame spraying processes
18. DGM News
19. DGM News