Article
Licensed
Unlicensed
Requires Authentication
Looking ahead after 60 successful years
Published/Copyright:
December 28, 2017
Published Online: 2017-12-28
Published in Print: 2018-01-04
© 2018, Carl Hanser Verlag, München
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Inhalt/Contents
- Contents
- Vorwort/Editorial
- Looking ahead after 60 successful years
- Fachbeiträge/Technical Contributions
- Deterioration mechanisms of materials – Influences on performance and reliability
- Corrosion fatigue assessment of extruded magnesium alloys AZ31 and ME20
- Low heat input welding of nickel superalloy GTD-111 with Inconel 625 filler metal
- Effect of Cr content on microstructure and mechanical properties of carbidic austempered ductile iron
- Optimization of welding parameters for DP600/TRIP800 dissimilar joints
- Microstructure and mechanical properties of friction welded AISI 1040/AISI 304L steels before and after electrochemical corrosion
- Fatigue behavior and mechanism of KMN in a very high cycle regime
- Gaussian filtering algorithm describing the topography of temper rolled strip and related edge effect
- Impression creep behavior of magnesium alloy ZK60
- Rauheitsanforderungen für die mobile Härteprüfung metallischer Werkstoffe
- Preparation and characterization of Kevlar/glass fiber laminates with a nanoclay enhanced epoxy matrix
- Effect of seawater on pin-loaded laminated composites
- Thermomechanical and acidic treatments to improve plasticization and properties of chitosan films: A comparative study of acid types and glycerol effects
- Efficient reduction of graphene oxide film by low temperature heat treatment and its effect on electrical conductivity
- Experimental evaluation of optimum process parameters for spinning of metals
Articles in the same Issue
- Inhalt/Contents
- Contents
- Vorwort/Editorial
- Looking ahead after 60 successful years
- Fachbeiträge/Technical Contributions
- Deterioration mechanisms of materials – Influences on performance and reliability
- Corrosion fatigue assessment of extruded magnesium alloys AZ31 and ME20
- Low heat input welding of nickel superalloy GTD-111 with Inconel 625 filler metal
- Effect of Cr content on microstructure and mechanical properties of carbidic austempered ductile iron
- Optimization of welding parameters for DP600/TRIP800 dissimilar joints
- Microstructure and mechanical properties of friction welded AISI 1040/AISI 304L steels before and after electrochemical corrosion
- Fatigue behavior and mechanism of KMN in a very high cycle regime
- Gaussian filtering algorithm describing the topography of temper rolled strip and related edge effect
- Impression creep behavior of magnesium alloy ZK60
- Rauheitsanforderungen für die mobile Härteprüfung metallischer Werkstoffe
- Preparation and characterization of Kevlar/glass fiber laminates with a nanoclay enhanced epoxy matrix
- Effect of seawater on pin-loaded laminated composites
- Thermomechanical and acidic treatments to improve plasticization and properties of chitosan films: A comparative study of acid types and glycerol effects
- Efficient reduction of graphene oxide film by low temperature heat treatment and its effect on electrical conductivity
- Experimental evaluation of optimum process parameters for spinning of metals