Abstract
The field of Prognostics and Health Management (PHM) in industries is gaining greater popularity to achieve high reliability by shifting the preventive maintenance to predictive maintenance. Estimation of Remaining Useful Life (RUL) is an effective prognostic measure that forecasts the health state of machine based on degradation modelling and condition monitoring. This article proposes a novel and robust methodology that uses Reduced Affinity Propagation (RAP) clustering technique that extracts representatives from the temporal signals measured through various heterogeneous sensors to predict the RUL using Echo State Network (ESN) with dynamic lateral inhibiting connections. The main advantage of the proposed model is that it does not overlook the features from the degradation signals and also learns the natural mapping among the representative points from the integrated sensor value. This approach is verified using CMAPPS dataset to show hopeful results in predicting the RUL of aircraft turbo fan engine. Also, this methodology can be a deployed as a tool in real time industrial applications to schedule predictive maintenance activities.
-
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: None declared.
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
1. Li, Z, Goebel, K, Wu, D. Degradation modeling and remaining useful life prediction of aircraft engines using ensemble learning. J Eng Gas Turbines Power 2019;141:041008–10. https://doi.org/10.1115/1.4041674.Search in Google Scholar
2. Xu, JP, Xu, L. Health management based on fusion prognostics for avionics systems. J Syst Eng Electron 2011;22:428–36. https://doi.org/10.3969/j.issn.1004-4132.2011.03.010.Search in Google Scholar
3. Mutunga, JM, Kimotho, JK, Muchiri, P. Health-index based prognostics for a turbofan engine using ensemble of machine learning algorithms. J Sustain Res Eng 2019;5:50–61.Search in Google Scholar
4. Sharanya, S, Karthikeyan, S. Classifying malicious nodes in VANETs using support vector machines with modified fading memory. ARPN J Eng Appl Sci 2017;12.Search in Google Scholar
5. Singh, SK, Kumar, S, Dwivedi, JP. A novel soft computing method for engine RUL prediction. Multimed Tool Appl 2019;78:4065–87. https://doi.org/10.1007/s11042-017-5204-x.Search in Google Scholar
6. GarcÃa Nieto, PJ, GarcÃa-Gonzalo, E, Sánchez Lasheras, F, de Cos Juez, FJ. Hybrid PSO–SVM-based method for forecasting of the remaining useful life for aircraft engines and evaluation of its reliability. Reliab Eng Syst Saf 2015;138:219–31.10.1016/j.ress.2015.02.001Search in Google Scholar
7. Liu, K, Huang, S. Integration of data fusion methodology and degradation modeling process to improve prognostics. IEEE Trans Autom Sci Eng 2016;13:344–54. https://doi.org/10.1109/TASE.2014.2349733.Search in Google Scholar
8. Yuting, W, Mei, Y, Shaopeng, D, Li, L, Yingqi, L. Remaining useful life estimation of engineered systems using vanilla LSTM neural networks. Neurocomputing 2018;275:167–79.10.1016/j.neucom.2017.05.063Search in Google Scholar
9. Peng, Y, Wang, H, Wang, J, Liu, D, Peng, X. A modified echo state network based remaining useful life estimation approach. In: IEEE conference on prognostics and health management. Denver, CO; 2012:1–7 pp.10.1109/ICPHM.2012.6299524Search in Google Scholar
10. Ma, J, Su, H, Zhao, W-L, Liu, B. Predicting the remaining useful life of an aircraft engine using a stacked sparse autoencoder with multilayer self-learning. Complexity 2018;2018:1–13. https://doi.org/10.1155/2018/3813029.Search in Google Scholar
11. Dangut, MD, Skaf, Z, Jennions, IK. An integrated machine learning model for aircraft components rare failure prognostics with log-based dataset. ISA Trans 2020;113:127–39. https://doi.org/10.1016/j.isatra.2020.05.001.Search in Google Scholar PubMed
12. Li, Z, Wu, D, Hu, C, Terpenny, J. An ensemble learning-based prognostic approach with degradation-dependent weights for remaining useful life prediction. Reliab Eng Syst Saf 2019;184:110–22. https://doi.org/10.1016/j.ress.2017.12.016.Search in Google Scholar
13. Saxena, A, Goebel, K, Simon, D, Eklund, N. Damage propagation modeling for aircraft engine run-to-failure simulation. In: International conference on prognostics and health management. Denver, CO; 2008:1–9 pp.10.1109/PHM.2008.4711414Search in Google Scholar
14. Mishra, RK, Johney, T, Srinivasan, K, Vaishakhi, N, Raghavendra, B. Failure analysis of HP turbine blades in a low bypass turbofan engine. J Fail Anal Prev 2013;13:274–81. https://doi.org/10.1007/s11668-013-9674-5.Search in Google Scholar
15. Karthikeyan, S, Subramanian, M, Ghosh, A, Prashanth, M, Karunanithi, R. Micro hardness and corrosion properties of A390 alloy + x vol.% zirconium dioxide (ZrO2) composites processed by P/M method. Int J Microstruct Mater Prop 2019;14:511–23. https://doi.org/10.1504/IJMMP.2019.103174.Search in Google Scholar
16. Skibinksy-Gitlin, ES, Alomar, ML, Frasser, CF, Canals, V. Simple cyclic reservoir computing with FPGA devices for efficient channel equalization. Artif Intell Soft Comput 2018. https://doi.org/10.1007/978-3-319-91253-0_22.Search in Google Scholar
17. Maass, W, Natschläger, T, Markram, H. Real-time computing without stable states: a new framework for neural computation based on perturbations. Neural Comput 2002;14:2531–60. https://doi.org/10.1162/089976602760407955.Search in Google Scholar PubMed
18. Boccato, L, Attux, R, Von Zuben, FJ. Self-organization and lateral interaction in echo state network reservoirs. Neurocomputing 2014;138:297–309. https://doi.org/10.1016/j.neucom.2014.01.036.Search in Google Scholar
19. Babu, GS, Zhao, P, Li, XL. Deep convolutional neural network based regression approach for estimation of remaining useful life. In: 21th International conference on database systems for advanced applications (DASFAA). Spinger, Dallas, USA; 2016: 214–28 pp.10.1007/978-3-319-32025-0_14Search in Google Scholar
20. Peng, K, Pi, Y, Jiao, R, Dong, J, Zhang, K, Zhang, C. Remaining useful life prediction for aircraft engines based on grey model. In: 2019 prognostics and system health management conference (PHM-Qingdao). Qingdao, China; 2019:1–5 pp.10.1109/PHM-Qingdao46334.2019.8943000Search in Google Scholar
21. Malhotra, P, Vishnu, TV, Ramakrishnan, A, Anand, G, Vig, L, Agarwal, P, et al.. Multi-Sensor prognostics using an unsupervised health index based on LSTM encoder-decoder. arXiv 2016;1608:06154.Search in Google Scholar
© 2022 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- The International Journal of Turbo and Jet Engines
- The aerothermodynamic cycle optimal design of a turbofan engine
- Multi-condition design optimization of groove flow control technique in an axial-flow pump
- Analysis on impulse characteristics of pulse detonation engine with nozzles
- Numerical investigation on implication of innovative hydrogen strut injector on performance and combustion characteristics in a scramjet combustor
- Optimization of Kiel geometry for better recovery factor in high temperature measurement in aero gas turbine engine
- Applicability of correlational data-mining to small-scale turbojet performance map generation
- Effect of multi-zone effusion cooling on an adiabatic flat plate for gas turbine application
- Flow quality improvement of the wind tunnel testing for a highly-loaded compressor cascade at high incidence
- Modeling and analysis of 3D radiative heat transfer in combustor
- A creep-fatigue life prediction model considering multi-factor coupling effect
- Optimization-based transient control of turbofan engines: a sequential quadratic programming approach
- Investigations on the interaction between the front and aft purge flow and the downstream vane of 1.5-stage turbine
- A study on design optimization for compressor blisks
- Exploration of an unconventional validation tool to investigate aero engine transonic fan flutter signature
- Evaluation of non-uniform water film behavior on the performance of an axial aeroengine compressor
- Predicting remaining useful life of turbofan engines using degradation signal based echo state network
- Effect of G-type integral squeeze film damper on the dynamic characteristics in rotor system
- Development of a one-dimensional code for the initial design of a micro gas turbine mixed flow compressor stage
- Numerical and experimental investigations of tip clearance effects in a high-flow-coefficient centrifugal compressor
- Experimental and numerical investigation on the effect of turboprop engine exhaust gas impingement on pusher aircraft
- Heat transfer distribution of single oblique jet impingement in crossflow under different inlet conditions
- Performance enhancement and flow separation control in an S-duct by air injection
- Gas dynamic analysis of the modern single shaft gas turbine engine flow path
- Aero engine health monitoring, diagnostics and prognostics for condition-based maintenance: an overview
- Influence of leading edge point on aerodynamic performance of asymmetric leading edge compressor airfoils
- The aerothermal performance of turbine blade squealer tip at various Reynolds numbers and Mach numbers with moving endwall
- Numerical investigation of a variable stator vane with nonuniform partial radial gaps in an annular compressor cascade
- Effect of self-recirculating casing treatment on the unsteady flow and stability of counter-rotating axial-flow compressor
- Research on temperature rise characteristics of end V-groove ring seal
- Research on the influence of honeycomb cell blockage on the seal leakage characteristics
- Vortex structure control based bleed in axial compressor cascade with tip clearance using large eddy simulation
- Development and application of a profile loss model considering the low-Re effect in low-pressure turbine
- Optimization of ACE mode transition control schedule considering geometric adjustment speed
- Numerical investigation of flow control in low-pressure turbine cascade using Gurney Flaps
- The design method of the V-shaped groove piston ring
- Control of subsonic jets using vanes as vortex generators
- Impact investigation of inlet environmental changes on the rated condition performance of a high-pressure compressor
- Research on new integral squeeze film damper vibration control of micro turbojet engine at high speed
- Effect of the distribution of the upstream probe support on performance of compressor cascade
- Effect of bypass ratio on sonic underexpanded co-flow jets with finite lip thickness
- Machine learning augmented multi-sensor data fusion to detect aero engine fan rotor blade flutter
- CFD analysis of flow control in compressor cascade using MVGs
- Quantitative investigation of the evaporation and resistance characteristics of inlet jet precooling
- Study on laser de-weight and dynamic balance technology of rotating machines
- Integrated design and analysis of inlet and missile with two side layout
- Research on turboprop engine control method based on linear parameter varying model
- Modeling and validation of the volume effect on the axial fan transient performance
- Ground effects on the aerodynamics of a wing with slot type distributed propulsion system for VTOL applications
- Multidisciplinary sensitivity analysis for turbine blade considering thickness uncertainties
- Accurate measurement and evaluation method of axial compressor efficiency under the influence of multiple factors
- Control mechanism of secondary flow in a turbine cascade with non-axisymmetric endwall profiling under Co-rotating incoming vortex
- Infrared simulation of aircraft rear fuselage based on a coupled CFD method
- Effect of multi-hole trench cooling on an adiabatic flat plate for gas turbine application
- Numerical study of transition process in different zones of a compressor cascade channel
Articles in the same Issue
- Frontmatter
- The International Journal of Turbo and Jet Engines
- The aerothermodynamic cycle optimal design of a turbofan engine
- Multi-condition design optimization of groove flow control technique in an axial-flow pump
- Analysis on impulse characteristics of pulse detonation engine with nozzles
- Numerical investigation on implication of innovative hydrogen strut injector on performance and combustion characteristics in a scramjet combustor
- Optimization of Kiel geometry for better recovery factor in high temperature measurement in aero gas turbine engine
- Applicability of correlational data-mining to small-scale turbojet performance map generation
- Effect of multi-zone effusion cooling on an adiabatic flat plate for gas turbine application
- Flow quality improvement of the wind tunnel testing for a highly-loaded compressor cascade at high incidence
- Modeling and analysis of 3D radiative heat transfer in combustor
- A creep-fatigue life prediction model considering multi-factor coupling effect
- Optimization-based transient control of turbofan engines: a sequential quadratic programming approach
- Investigations on the interaction between the front and aft purge flow and the downstream vane of 1.5-stage turbine
- A study on design optimization for compressor blisks
- Exploration of an unconventional validation tool to investigate aero engine transonic fan flutter signature
- Evaluation of non-uniform water film behavior on the performance of an axial aeroengine compressor
- Predicting remaining useful life of turbofan engines using degradation signal based echo state network
- Effect of G-type integral squeeze film damper on the dynamic characteristics in rotor system
- Development of a one-dimensional code for the initial design of a micro gas turbine mixed flow compressor stage
- Numerical and experimental investigations of tip clearance effects in a high-flow-coefficient centrifugal compressor
- Experimental and numerical investigation on the effect of turboprop engine exhaust gas impingement on pusher aircraft
- Heat transfer distribution of single oblique jet impingement in crossflow under different inlet conditions
- Performance enhancement and flow separation control in an S-duct by air injection
- Gas dynamic analysis of the modern single shaft gas turbine engine flow path
- Aero engine health monitoring, diagnostics and prognostics for condition-based maintenance: an overview
- Influence of leading edge point on aerodynamic performance of asymmetric leading edge compressor airfoils
- The aerothermal performance of turbine blade squealer tip at various Reynolds numbers and Mach numbers with moving endwall
- Numerical investigation of a variable stator vane with nonuniform partial radial gaps in an annular compressor cascade
- Effect of self-recirculating casing treatment on the unsteady flow and stability of counter-rotating axial-flow compressor
- Research on temperature rise characteristics of end V-groove ring seal
- Research on the influence of honeycomb cell blockage on the seal leakage characteristics
- Vortex structure control based bleed in axial compressor cascade with tip clearance using large eddy simulation
- Development and application of a profile loss model considering the low-Re effect in low-pressure turbine
- Optimization of ACE mode transition control schedule considering geometric adjustment speed
- Numerical investigation of flow control in low-pressure turbine cascade using Gurney Flaps
- The design method of the V-shaped groove piston ring
- Control of subsonic jets using vanes as vortex generators
- Impact investigation of inlet environmental changes on the rated condition performance of a high-pressure compressor
- Research on new integral squeeze film damper vibration control of micro turbojet engine at high speed
- Effect of the distribution of the upstream probe support on performance of compressor cascade
- Effect of bypass ratio on sonic underexpanded co-flow jets with finite lip thickness
- Machine learning augmented multi-sensor data fusion to detect aero engine fan rotor blade flutter
- CFD analysis of flow control in compressor cascade using MVGs
- Quantitative investigation of the evaporation and resistance characteristics of inlet jet precooling
- Study on laser de-weight and dynamic balance technology of rotating machines
- Integrated design and analysis of inlet and missile with two side layout
- Research on turboprop engine control method based on linear parameter varying model
- Modeling and validation of the volume effect on the axial fan transient performance
- Ground effects on the aerodynamics of a wing with slot type distributed propulsion system for VTOL applications
- Multidisciplinary sensitivity analysis for turbine blade considering thickness uncertainties
- Accurate measurement and evaluation method of axial compressor efficiency under the influence of multiple factors
- Control mechanism of secondary flow in a turbine cascade with non-axisymmetric endwall profiling under Co-rotating incoming vortex
- Infrared simulation of aircraft rear fuselage based on a coupled CFD method
- Effect of multi-hole trench cooling on an adiabatic flat plate for gas turbine application
- Numerical study of transition process in different zones of a compressor cascade channel