Article
Publicly Available
Frontmatter
Published/Copyright:
August 31, 2016
Published Online: 2016-8-31
Published in Print: 2016-9-1
©2016 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Original articles
- Prolonged protein immobilization of biosensor by chemically cross-linked glutaraldehyde on mixed cellulose membrane
- Hybrid biocomposites from agricultural residues: mechanical, water absorption and tribological behaviors
- Effects of nucleation and stereocomplex formation of poly(lactic acid)
- Preparation and characterization of polystyrene-MgAl layered double hydroxide nanocomposites using bulk polymerization
- Fracture behavior and deformation mechanisms of polypropylene/ethylene-propylene-diene blends
- Effect of mechanical properties of metal powder-filled hybrid moulded products
- Ablation and thermo-mechanical tailoring of EPDM rubber using carbon fibers
- Effects of mechanical strength, working temperature and wax lubricant on tribological behavior of polystyrene
- Temperature rise in a verging annular die
- Numerical investigation of the temperature influence on the melt predistribution in a spiral mandrel die with different polyolefins
Articles in the same Issue
- Frontmatter
- Original articles
- Prolonged protein immobilization of biosensor by chemically cross-linked glutaraldehyde on mixed cellulose membrane
- Hybrid biocomposites from agricultural residues: mechanical, water absorption and tribological behaviors
- Effects of nucleation and stereocomplex formation of poly(lactic acid)
- Preparation and characterization of polystyrene-MgAl layered double hydroxide nanocomposites using bulk polymerization
- Fracture behavior and deformation mechanisms of polypropylene/ethylene-propylene-diene blends
- Effect of mechanical properties of metal powder-filled hybrid moulded products
- Ablation and thermo-mechanical tailoring of EPDM rubber using carbon fibers
- Effects of mechanical strength, working temperature and wax lubricant on tribological behavior of polystyrene
- Temperature rise in a verging annular die
- Numerical investigation of the temperature influence on the melt predistribution in a spiral mandrel die with different polyolefins