Contents

Articles in the same Issue

1. Contents
2. Original Contributions
3. Distributions of As, Pb, Sn and Zn as minor elements between iron silicate slag and copper in equilibrium with tridymite in the Cu–Fe–O–Si system
4. Short Communications
5. Free vibration analysis and selection of composite for high strength and stiffness using multi-attribute decision making
6. Metallurgical and wear study of MWCNT-reinforced h-AMMC fabricated through microwave hybrid sintering
7. Effects of microstructure and lattice misfit on creep life of Ni-based single crystal superalloy during long-term thermal exposure
8. Fracture toughness assessment at different regions in an inertial friction welded Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy plate
9. Microstructure and mechanical property improvement of dissimilar metal joints for TC4 Ti alloy to Nitinol NiTi alloy by laser welding
10. The influence of gadolinium on Al–Ti–C master alloy and its refining effect on AZ31 magnesium alloy
11. Effect of adding rare-earth cerium on the microstructure and acid rain corrosion resistance of the ADC12 alloy
12. Effect of TiO₂ crystal form on the denitration performance of Ce–W–Ti catalyst
13. Notifications
14. Deutsche Gesellschaft für Materialkunde / German Materials Science Society