Books/Bücher

Articles in the same Issue

1. Frontmatter
2. Editorial
3. Challenges and interesting observations associated with feedback-controlled nanoindentation
4. Nanoscratching on surfaces: the relationships between lateral force, normal force and normal displacement
5. Nano-scratch testing on thin diamond-like carbon coatings for microactuators: friction, wear and elastic-plastic deformation
6. Comparison of hardness and Young’s modulus by single indentation and multiple unloading indentation
7. Nanomechanical characterization of Ti-base nanostructure-dendrite composite
8. Surface topography and nanomechanical/tribological behaviour of ultrathin nitride films on silicon
9. Viscosity of glass at high contact pressure during indentation experiments
10. Dynamic indentation measurements on amorphous materials
11. Technique for measuring the residual strain in strained Si/SiGe MOSFET structures using Raman spectroscopy
12. Partial atomic volumes of early transition metals in A¹⁰ metal-based solid solutions
13. Effects of an external electric field applied during the solution heat treatment of the Al-Mg-Si-Cu alloy AA6111
14. Fatigue crack propagation in pseudoelastic TiNi smart microcomponents
15. Microstructure evolution in immiscible alloys during rapid directional solidification
16. The creep performance of a sand-cast Mg–2.8 Nd–0.8 Zn–0.5 Zr–0.3 Gd alloy at 241 to 262^°C
17. Punch-shear tests and size effects for evaluating the shear strength of machinable ceramics
18. Study of Ti–Si in situ composite processing by multi-stage eutectic solidification
19. Twin-roll cast Al–Mg –Si sheet for automotive applications
20. Thermodynamics and surface properties of Fe–V and Fe–Ti liquid alloys
21. Personal/ Personelles
22. Press/ Presse
23. Books/Bücher
24. Conferences / Konferenzen
25. Frontmatter
26. Editorial
27. Editorial
28. Articles Basic
29. Challenges and interesting observations associated with feedback-controlled nanoindentation
30. Nanoscratching on surfaces: the relationships between lateral force, normal force and normal displacement
31. Nano-scratch testing on thin diamond-like carbon coatings for microactuators: friction, wear and elastic-plastic deformation
32. Comparison of hardness and Young’s modulus by single indentation and multiple unloading indentation
33. Nanomechanical characterization of Ti-base nanostructure-dendrite composite
34. Surface topography and nanomechanical/tribological behaviour of ultrathin nitride films on silicon
35. Viscosity of glass at high contact pressure during indentation experiments
36. Dynamic indentation measurements on amorphous materials
37. Technique for measuring the residual strain in strained Si/SiGe MOSFET structures using Raman spectroscopy
38. Partial atomic volumes of early transition metals in A¹⁰ metal-based solid solutions
39. Effects of an external electric field applied during the solution heat treatment of the Al-Mg-Si-Cu alloy AA6111
40. Fatigue crack propagation in pseudoelastic TiNi smart microcomponents
41. Microstructure evolution in immiscible alloys during rapid directional solidification
42. The creep performance of a sand-cast Mg–2.8 Nd–0.8 Zn–0.5 Zr–0.3 Gd alloy at 241 to 262^°C
43. Articles Applied
44. Punch-shear tests and size effects for evaluating the shear strength of machinable ceramics
45. Study of Ti–Si in situ composite processing by multi-stage eutectic solidification
46. Twin-roll cast Al–Mg –Si sheet for automotive applications
47. Thermodynamics and surface properties of Fe–V and Fe–Ti liquid alloys
48. Notifications/Mitteilungen
49. Personal/ Personelles
50. Books/Bücher
51. Press/ Presse
52. Conferences / Konferenzen