Preparation of Chitosan based Nanofibers: Optimization and Modeling
-
K. Thirugnanasambandham
and
V. Sivakumar
Abstract
The main objective of the present study is to prepare a chitosan based nanofiber and model the electrospinning process using response surface methodology (RSM). The electrospinning parameters such as collector distance, polymer solution concentration and applied voltage were optimized by using three-variable-three-level Box–Behnken design (BBD). Based on RSM analysis, second order polynomial equation was formed and it indicated good correspondence between experimental and predicted values. 3D response surface plots were used to study the individual and interactive effects of process variables on chitosan based nanofiber diameter. The optimum process conditions for the minimum chitosan based nanofiber diameter (0.3 µm) were found to be collector distance of 12 cm, polymer solution concentration of 25% and applied voltage of 6 kV.
References
1. Agarwal, S., Wendorff, J.H., Greiner, A., 2008. Use of electrospinning technique for biomedical applications. Polymer 49, 5603–5621.10.1016/j.polymer.2008.09.014Search in Google Scholar
2. Banik, R.M., Santhiagu, A., Upadhyay, S.N., 2007. Optimization of nutrients for gellan gum production by sphingomonas paucimobilis ATCC-31461 in molassebased medium using response surface methodology. Bio-resources Technology 98, 792–797.10.1016/j.biortech.2006.03.012Search in Google Scholar PubMed
3. Deniz, B., Merve, H., Sermin, E., Erdal, K., 2012. Comparison of the results of response surface methodology and artificial neural network for the biosorption of lead using black cumin. Bioresource Technology 112, 111–115.10.1016/j.biortech.2012.02.084Search in Google Scholar PubMed
4. Ferreira, S.L.C., Bruns, R.E., da Silva, E.G.P., dos Santos, W.N.L., Quintella, C.M., David, J.M., de Andrade, J.B., Breitkreitz, M.C., Jardim, I.C.S.F., Neto, B.B., 2007. Statistical designs and response surface techniques for the optimization of chromatographic systems. Journal of Chromatography A 1158, 2–14.10.1016/j.chroma.2007.03.051Search in Google Scholar PubMed
5. Geng, X.Y., Kwon, O.H., Jang, J.H., 2005. Electrospinning of chitosan dissolved in concentrated acetic acid solution. Biomaterials 26, 5427–5432.10.1016/j.biomaterials.2005.01.066Search in Google Scholar PubMed
6. Ji, L., Medford, A.J., Zhang, X., 2009. Electrospun polyacrylonitrile/zinc chloride composite nanofibers and their response to hydrogen sulfide. Polymer 50, 605–612.10.1016/j.polymer.2008.11.016Search in Google Scholar
7. Klossner, R.R., Queen, H.A., Coughlin, A.J., Krause, W.E., 2008. Correlation of chitosan’s reological properties and its ability to electrospun. Biomacromolecules 9, 2947–2953.10.1021/bm800738uSearch in Google Scholar PubMed
8. Min, B.M., Lee, S.W., Lim, J.N., You, Y., Lee, T.S., Kang, P.H., 2004. Chitin and chitosan nanofibers: Electrospinning of chitin and deacetylation of chitin nanofibers. Polymer 45, 7137–7142.10.1016/j.polymer.2004.08.048Search in Google Scholar
9. Muzzarelli, R.A.A., 1996. Chitin: Metal ion chelation and enzyme immobilization, in: J. C. Salamone (Ed.), The Polymeric Materials Encyclopedia. CRC Press, Inc., Boca Raton, FL, USA, pp. 295–300.Search in Google Scholar
10. Tir, M., Moulai-Mostefa, N., 2008. Optimization of oil removal from oily wastewater by electrocoagulation using response surface method. Journal of Hazardous Materials 158, 107–115.10.1016/j.jhazmat.2008.01.051Search in Google Scholar PubMed
11. Torres-Giner, S., Ocio, M.J., Lagaron, J.M., 2008. Development of active antimicrobial fiber based chitosan polysaccharide nanostructures using electrospinning. Engineering in Life Sciences 8, 303–314.10.1002/elsc.200700066Search in Google Scholar
©2016 by De Gruyter
Articles in the same Issue
- Frontmatter
- Review
- Novel Membrane Reactor Concepts for Hydrogen Production from Hydrocarbons: A Review
- Research Articles
- Modeling and Simulation Study of an Industrial Radial Moving Bed Reactor for Propane Dehydrogenation Process
- Oxidative Degradation of Methylene Blue in Aqueous Medium Catalyzed by Lab Prepared Nickel Hydroxide
- CFD Modelling of a Hollow Fibre Membrane for CO2 Removal by Aqueous Amine Solutions of MEA, DEA and MDEA
- Performance Study of a Thermally Double Coupled Multi-Tubular Reactor by Considering the Effect of Flow Type Patterns
- Radiative Three-Dimensional Flow with Chemical Reaction
- Three-Phase Model of a Fluidized-Bed Catalytic Reactor for Polyethylene Synthesis
- Study on the Effect of Nickel Doping on Mo-Bi Based Catalyst for Selective Oxidation of Isobutene to Methacrolein
- DM Water Plant Sedimentation as a Cheap and Waste Source of Catalyst for Biodiesel Production
- Recovery of Biogas from Meat Industry Wastewater Using Continuously Stirred Tank Reactor (CSTR): Modeling and Optimization
- Comparison of CFD Simulation and Simplified Modeling of a Fluidized Bed CO2 Capture Reactor
- Kinetic Study for Platinum Extraction from Spent Catalyst in Cyanide Solution at High Temperatures
- Hydroisomerization of Biomass Derived n-Hexadecane Towards Diesel Pool: Effect of Selective Removal External Surface Sites from Pt/ZSM-22
- Heat Flux and Variable Thermal Conductivity Effects on Casson Flow and Heat Transfer due to an Exponentially Stretching Sheet with Viscous Dissipation and Heat Generation
- Optimization of Nickel Chemical Extraction from Hazardous Residue
- Green Approach for Biodiesel Production from Jojoba Oil Supported by Process Modeling and Simulation
- Differentiating Process Performance of Various Coagulants in Removal of Congo red and Orange G Dyes
- CFD Simulation of Hydrodynamic of a Bubble Column Reactor Operating in Churn-Turbulent Regime and Effect of Gas Inlet Distribution on System Characteristics
- Transformation of Phenolic Compounds by Fe(III) in the Aqueous Solution in Dark and Under Irradiation
- Transient Predictive Model for Dynamic Analysis, Kinetic Study, and Reactor Design of Triglycerides Transesterification to Biodiesel
- Screening of Alternative Carbon Sources for Recombinant Protein Production in Pichia pastoris
- Optimization of a Large Scale Industrial Reactor Towards Tailor Made Polymers Using Genetic Algorithm
- Model of Reactive Transport within a Light Photocatalytic Textile
- Preparation of Chitosan based Nanofibers: Optimization and Modeling
- Adsorption of As (III) on Iron Coated Quartz Sand: Influence of Temperature on the Equilibrium Isotherm, Thermodynamics and Isosteric Heat of Adsorption Analysis
- Resistance Characteristics of Coal Slime in Pipe Flow at High Pressure
- Activity Comparison of Acidic Resins in the Production of Valuable Glycerol Acetates
- Bulk Polymerization of Styrene using Multifunctional Initiators in a Batch Reactor: A Comprehensive Mathematical Model
- An Effective Reaction Rate Model for Gas-Solid Reactions with High Intra-Particle Diffusion Resistance
- Heart-Like Micro-Flow Mixer
- Hydrogen Production by Hydrolysis of NaBH4 with Cr-Ni-W-B Catalyst: Effects of Cold Plasma and Chromium Content
- Prediction of Reactivity Ratios in Free Radical Copolymerization from Monomer Resonance–Polarity (Q–e) Parameters: Genetic Programming-Based Models
- Steady-State Modeling of Pt-Catalyzed H2 Combustion in a Monolithic Reactor: From Micro- to Macro-kinetics
- Premixed Methanol–Air Combustion Characteristics in a Mini-scale Catalytic Combustor
- Kinetic Modeling of VOC Photocatalytic Degradation Using a Process at Different Reactor Configurations and Scales
- Improvement of Activated Sludge Process Using a Nonlinear PI Controller Design via Adaptive Gain
- Modeling and Simulation of a Pilot-Scale Bubbling Fluidized Bed Gasifier for the Gasification of High Ash Indian Coal Using Eulerian Granular Approach
- Performance of a Catalytic Gas–Solid Fluidized Bed Reactor in the Presence of Interparticle Forces
- Mathematical Modeling of Biodiesel Production under Intense Agitation
- Extended Aeration Activated Sludge Reactor (EAASR) for Removal of Nitrobenzene: Air Stripped or Biologically Removed?
- CFD Modeling of Algae Flash Pyrolysis in the Batch Fluidized Bed Reactor Including Heat Carrier Particles
- A Robust Extended State Observer for the Estimation of Concentration and Kinetics in a CSTR
- Dynamic Modeling of CATOFIN® Fixed-Bed Iso-Butane Dehydrogenation Reactor for Operational Optimization
- Effect of Biomass Compositions on Combustion Kinetic Parameters using Response Surface Methodology
- Short Communications
- Discussions on Particle Flux Measurement in Gas-Solids Risers
- Use of New Regeneration Processes for Thermolabile Amines
- Oxidative-Extractive Desulfurization of Liquid Fuel by Dimethyl Sulfoxide and ZnCl2 Based Ionic Liquid
- Corrigendum
- Corrigendum to: Performance Analysis of Immobilized Enzyme Semifluidised Bed Bioreactors
Articles in the same Issue
- Frontmatter
- Review
- Novel Membrane Reactor Concepts for Hydrogen Production from Hydrocarbons: A Review
- Research Articles
- Modeling and Simulation Study of an Industrial Radial Moving Bed Reactor for Propane Dehydrogenation Process
- Oxidative Degradation of Methylene Blue in Aqueous Medium Catalyzed by Lab Prepared Nickel Hydroxide
- CFD Modelling of a Hollow Fibre Membrane for CO2 Removal by Aqueous Amine Solutions of MEA, DEA and MDEA
- Performance Study of a Thermally Double Coupled Multi-Tubular Reactor by Considering the Effect of Flow Type Patterns
- Radiative Three-Dimensional Flow with Chemical Reaction
- Three-Phase Model of a Fluidized-Bed Catalytic Reactor for Polyethylene Synthesis
- Study on the Effect of Nickel Doping on Mo-Bi Based Catalyst for Selective Oxidation of Isobutene to Methacrolein
- DM Water Plant Sedimentation as a Cheap and Waste Source of Catalyst for Biodiesel Production
- Recovery of Biogas from Meat Industry Wastewater Using Continuously Stirred Tank Reactor (CSTR): Modeling and Optimization
- Comparison of CFD Simulation and Simplified Modeling of a Fluidized Bed CO2 Capture Reactor
- Kinetic Study for Platinum Extraction from Spent Catalyst in Cyanide Solution at High Temperatures
- Hydroisomerization of Biomass Derived n-Hexadecane Towards Diesel Pool: Effect of Selective Removal External Surface Sites from Pt/ZSM-22
- Heat Flux and Variable Thermal Conductivity Effects on Casson Flow and Heat Transfer due to an Exponentially Stretching Sheet with Viscous Dissipation and Heat Generation
- Optimization of Nickel Chemical Extraction from Hazardous Residue
- Green Approach for Biodiesel Production from Jojoba Oil Supported by Process Modeling and Simulation
- Differentiating Process Performance of Various Coagulants in Removal of Congo red and Orange G Dyes
- CFD Simulation of Hydrodynamic of a Bubble Column Reactor Operating in Churn-Turbulent Regime and Effect of Gas Inlet Distribution on System Characteristics
- Transformation of Phenolic Compounds by Fe(III) in the Aqueous Solution in Dark and Under Irradiation
- Transient Predictive Model for Dynamic Analysis, Kinetic Study, and Reactor Design of Triglycerides Transesterification to Biodiesel
- Screening of Alternative Carbon Sources for Recombinant Protein Production in Pichia pastoris
- Optimization of a Large Scale Industrial Reactor Towards Tailor Made Polymers Using Genetic Algorithm
- Model of Reactive Transport within a Light Photocatalytic Textile
- Preparation of Chitosan based Nanofibers: Optimization and Modeling
- Adsorption of As (III) on Iron Coated Quartz Sand: Influence of Temperature on the Equilibrium Isotherm, Thermodynamics and Isosteric Heat of Adsorption Analysis
- Resistance Characteristics of Coal Slime in Pipe Flow at High Pressure
- Activity Comparison of Acidic Resins in the Production of Valuable Glycerol Acetates
- Bulk Polymerization of Styrene using Multifunctional Initiators in a Batch Reactor: A Comprehensive Mathematical Model
- An Effective Reaction Rate Model for Gas-Solid Reactions with High Intra-Particle Diffusion Resistance
- Heart-Like Micro-Flow Mixer
- Hydrogen Production by Hydrolysis of NaBH4 with Cr-Ni-W-B Catalyst: Effects of Cold Plasma and Chromium Content
- Prediction of Reactivity Ratios in Free Radical Copolymerization from Monomer Resonance–Polarity (Q–e) Parameters: Genetic Programming-Based Models
- Steady-State Modeling of Pt-Catalyzed H2 Combustion in a Monolithic Reactor: From Micro- to Macro-kinetics
- Premixed Methanol–Air Combustion Characteristics in a Mini-scale Catalytic Combustor
- Kinetic Modeling of VOC Photocatalytic Degradation Using a Process at Different Reactor Configurations and Scales
- Improvement of Activated Sludge Process Using a Nonlinear PI Controller Design via Adaptive Gain
- Modeling and Simulation of a Pilot-Scale Bubbling Fluidized Bed Gasifier for the Gasification of High Ash Indian Coal Using Eulerian Granular Approach
- Performance of a Catalytic Gas–Solid Fluidized Bed Reactor in the Presence of Interparticle Forces
- Mathematical Modeling of Biodiesel Production under Intense Agitation
- Extended Aeration Activated Sludge Reactor (EAASR) for Removal of Nitrobenzene: Air Stripped or Biologically Removed?
- CFD Modeling of Algae Flash Pyrolysis in the Batch Fluidized Bed Reactor Including Heat Carrier Particles
- A Robust Extended State Observer for the Estimation of Concentration and Kinetics in a CSTR
- Dynamic Modeling of CATOFIN® Fixed-Bed Iso-Butane Dehydrogenation Reactor for Operational Optimization
- Effect of Biomass Compositions on Combustion Kinetic Parameters using Response Surface Methodology
- Short Communications
- Discussions on Particle Flux Measurement in Gas-Solids Risers
- Use of New Regeneration Processes for Thermolabile Amines
- Oxidative-Extractive Desulfurization of Liquid Fuel by Dimethyl Sulfoxide and ZnCl2 Based Ionic Liquid
- Corrigendum
- Corrigendum to: Performance Analysis of Immobilized Enzyme Semifluidised Bed Bioreactors
