Influence of Long-term Aging on Microstructure and Creep Behaviors of FGH95 Nickel-based Superalloy
-
S. G. Tian
,
G. L. Xie
Abstract
By means of long-term aging treatment, creep properties measurement and microstructure observation, the influences of long-term aging on the microstructure and creep behaviors of FGH95 Superalloy are investigated. Results show that the fine γ′ particles dispersedly precipitate in the alloy after fully heat treated, and coarser γ′ phase discontinuously distribute along the grain boundaries. After the alloy is long-term aged at 723 K for 500 h, the fine γ′ phase with better cube degree and carbide particles distribute dispersedly in the alloy to enhance the creep resistance of the alloy for possessing a longer creep lifetime at the condition of 923 K and 1034 MPa. The deformed feature of the alloy is that configurations of slipping dislocations and the stacking fault appear in the alloy. As the creep goes on, the cracks initiate and propagate along the boundaries due to dislocations tangling in the grain boundaries for bringing out the stress concentration.
©[2012] by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Masthead
- High Temperature Tensile Properties of Equal Channel Angular Pressed Al-Zn-Mg-Cu Alloy
- Hard Finish Turning Parameters Optimization for Machining of High Temperature Stainless Steel
- High Cycle Fatigue and Cyclic Plastic Deformation Behaviour of High Temperature Oxidation Resistant Titanium Aluminide Coated IMI 834 Alloy at 873 K
- Microstructural and Mechanical Properties of Er2O3-ZrO2 Ceramics with Different Er2O3 Contents
- Synthesis of Different Morphologies of PbS Nanostructures via Hydrothermal Process
- Facile Hydrothermal Synthesis of CoSO4ċH2O Nanoparticles and Barite Microcubes from Novel Precursors
- Hot Corrosion of Fe-Cr Alloys with 75 Na2SO4 + 25 NaCl Coating at 1173 K
- A Simple Method for Synthesis of PbS Nanoparticles Using 2-Mercaptoethanol as the Capping Agent
- Influence of Alloy Grain Size on High Temperature Corrosion Behavior of 2.25 Cr-1 Mo Steel in SO2 + O2 Atmosphere
- Encapsulation of Erbium(III) and Thulium(III) Nanocomplexes Containing 18- and 20-Membered Dioxa Tetraaza Macryclic Ligands Within the Framework of Zeolite
- Calculation of the Raman Linewidths of Lattice Modes Close to the α-β Transition in Quartz
- Production and Characterization of Hydroxyapatite-Zirconia Composites
- Influence of Long-term Aging on Microstructure and Creep Behaviors of FGH95 Nickel-based Superalloy
- Remnant Life Assessment and Microstructural Studies on Service Exposed Primary Reformer Tubes of a Catalytic Converter of an Ammonia Plant
- Preparation and Characterization of Poly Methyl Methacrylate-cadmium Sulfide Nanocomposite
- Oxidation Kinetics of Steels Utilized in the Production of Valves in Automobile Industry
Artikel in diesem Heft
- Masthead
- High Temperature Tensile Properties of Equal Channel Angular Pressed Al-Zn-Mg-Cu Alloy
- Hard Finish Turning Parameters Optimization for Machining of High Temperature Stainless Steel
- High Cycle Fatigue and Cyclic Plastic Deformation Behaviour of High Temperature Oxidation Resistant Titanium Aluminide Coated IMI 834 Alloy at 873 K
- Microstructural and Mechanical Properties of Er2O3-ZrO2 Ceramics with Different Er2O3 Contents
- Synthesis of Different Morphologies of PbS Nanostructures via Hydrothermal Process
- Facile Hydrothermal Synthesis of CoSO4ċH2O Nanoparticles and Barite Microcubes from Novel Precursors
- Hot Corrosion of Fe-Cr Alloys with 75 Na2SO4 + 25 NaCl Coating at 1173 K
- A Simple Method for Synthesis of PbS Nanoparticles Using 2-Mercaptoethanol as the Capping Agent
- Influence of Alloy Grain Size on High Temperature Corrosion Behavior of 2.25 Cr-1 Mo Steel in SO2 + O2 Atmosphere
- Encapsulation of Erbium(III) and Thulium(III) Nanocomplexes Containing 18- and 20-Membered Dioxa Tetraaza Macryclic Ligands Within the Framework of Zeolite
- Calculation of the Raman Linewidths of Lattice Modes Close to the α-β Transition in Quartz
- Production and Characterization of Hydroxyapatite-Zirconia Composites
- Influence of Long-term Aging on Microstructure and Creep Behaviors of FGH95 Nickel-based Superalloy
- Remnant Life Assessment and Microstructural Studies on Service Exposed Primary Reformer Tubes of a Catalytic Converter of an Ammonia Plant
- Preparation and Characterization of Poly Methyl Methacrylate-cadmium Sulfide Nanocomposite
- Oxidation Kinetics of Steels Utilized in the Production of Valves in Automobile Industry
