Abstract
Zeolite framework stabilized erbium(III) and thulium(III) complex nanoparticles was prepared for the first time by using a two step procedure: the ion exchange of Ln3+ (Ln: Er and Tm) with the extra framework Na+ ions in zeolite-Y, the template synthesis of 2,6-diformyl-4-methylphenol with different diamines. Analysis of the data indicated that the Ln(III) complexes has been encapsulated within the nanocavity of zeolite Y and exhibit different property from those of the free complexes, which can arise from distortions caused by steric effects due to the presence of sodium cations, or from interactions with the zeolite matrix.
©[2012] by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Masthead
- High Temperature Tensile Properties of Equal Channel Angular Pressed Al-Zn-Mg-Cu Alloy
- Hard Finish Turning Parameters Optimization for Machining of High Temperature Stainless Steel
- High Cycle Fatigue and Cyclic Plastic Deformation Behaviour of High Temperature Oxidation Resistant Titanium Aluminide Coated IMI 834 Alloy at 873 K
- Microstructural and Mechanical Properties of Er2O3-ZrO2 Ceramics with Different Er2O3 Contents
- Synthesis of Different Morphologies of PbS Nanostructures via Hydrothermal Process
- Facile Hydrothermal Synthesis of CoSO4ċH2O Nanoparticles and Barite Microcubes from Novel Precursors
- Hot Corrosion of Fe-Cr Alloys with 75 Na2SO4 + 25 NaCl Coating at 1173 K
- A Simple Method for Synthesis of PbS Nanoparticles Using 2-Mercaptoethanol as the Capping Agent
- Influence of Alloy Grain Size on High Temperature Corrosion Behavior of 2.25 Cr-1 Mo Steel in SO2 + O2 Atmosphere
- Encapsulation of Erbium(III) and Thulium(III) Nanocomplexes Containing 18- and 20-Membered Dioxa Tetraaza Macryclic Ligands Within the Framework of Zeolite
- Calculation of the Raman Linewidths of Lattice Modes Close to the α-β Transition in Quartz
- Production and Characterization of Hydroxyapatite-Zirconia Composites
- Influence of Long-term Aging on Microstructure and Creep Behaviors of FGH95 Nickel-based Superalloy
- Remnant Life Assessment and Microstructural Studies on Service Exposed Primary Reformer Tubes of a Catalytic Converter of an Ammonia Plant
- Preparation and Characterization of Poly Methyl Methacrylate-cadmium Sulfide Nanocomposite
- Oxidation Kinetics of Steels Utilized in the Production of Valves in Automobile Industry
Articles in the same Issue
- Masthead
- High Temperature Tensile Properties of Equal Channel Angular Pressed Al-Zn-Mg-Cu Alloy
- Hard Finish Turning Parameters Optimization for Machining of High Temperature Stainless Steel
- High Cycle Fatigue and Cyclic Plastic Deformation Behaviour of High Temperature Oxidation Resistant Titanium Aluminide Coated IMI 834 Alloy at 873 K
- Microstructural and Mechanical Properties of Er2O3-ZrO2 Ceramics with Different Er2O3 Contents
- Synthesis of Different Morphologies of PbS Nanostructures via Hydrothermal Process
- Facile Hydrothermal Synthesis of CoSO4ċH2O Nanoparticles and Barite Microcubes from Novel Precursors
- Hot Corrosion of Fe-Cr Alloys with 75 Na2SO4 + 25 NaCl Coating at 1173 K
- A Simple Method for Synthesis of PbS Nanoparticles Using 2-Mercaptoethanol as the Capping Agent
- Influence of Alloy Grain Size on High Temperature Corrosion Behavior of 2.25 Cr-1 Mo Steel in SO2 + O2 Atmosphere
- Encapsulation of Erbium(III) and Thulium(III) Nanocomplexes Containing 18- and 20-Membered Dioxa Tetraaza Macryclic Ligands Within the Framework of Zeolite
- Calculation of the Raman Linewidths of Lattice Modes Close to the α-β Transition in Quartz
- Production and Characterization of Hydroxyapatite-Zirconia Composites
- Influence of Long-term Aging on Microstructure and Creep Behaviors of FGH95 Nickel-based Superalloy
- Remnant Life Assessment and Microstructural Studies on Service Exposed Primary Reformer Tubes of a Catalytic Converter of an Ammonia Plant
- Preparation and Characterization of Poly Methyl Methacrylate-cadmium Sulfide Nanocomposite
- Oxidation Kinetics of Steels Utilized in the Production of Valves in Automobile Industry