Effect of Physisporinus vitreus on wood properties of Norway spruce. Part 2: Aspects of microtensile strength and chemical changes
-
Christian Lehringer
,
Bodo Saake
Abstract
The biotechnological application of the white rot fungus Physisporinus vitreus named “bioincising” is currently being investigated for permeability improvement of Norway spruce (Picea abies (L.) Karst.) wood. During short-term (<9 weeks) incubation, fungal activity induces degradation of pit membranes and a simultaneous alteration of the tracheid cell wall structure. In Part 1 of this article series, the occurrence of selective delignification and simultaneous degradation was shown by UV-microspectrophotometry (UMSP). Moreover, significant reduction of Brinell hardness was recorded after 7 and 9 weeks incubation. For a better understanding of the chemical alterations in the wood constituents and the corresponding changes of mechanical properties due to fungal activity, we applied microtensile tests on thin strips that were prepared from the surface of incubated Norway spruce wood. Indications for the occurrence of selective delignification and simultaneous degradation were evident. Determination of lignin content and carbohydrate analysis by borate anion exchange chromatography confirmed the results. The present study verifies the findings from Part 1 of this article series and from previously conducted microscopic investigations. Now, the degradation characteristics of P. vitreus are established and the bioincising process can be further optimized with higher reliability.
©2011 by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Original Papers
- Lignocellulosic biorefinery: process integration of hydrolysis and fermentation (SSF process)
- Study of stilbene and resin acid content of Scots pine heartwood by electrical impedance spectroscopy (EIS)
- Radical scavenging characteristics of condensed tannins from barks of various tree species compared with quebracho wood tannin
- Two-step hydrolysis of nipa (Nypa fruticans) frond as treated by semi-flow hot-compressed water
- Effect of acetic acid addition on chemical conversion of woods as treated by semi-flow hot-compressed water
- Oxidative cleavage of non-phenolic β-O-4 lignin model dimers by an extracellular aromatic peroxygenase
- Surface chemistry of vessel elements by FE-SEM, μ-XPS and ToF-SIMS
- Application of FT-NIR-DR and FT-IR-ATR spectroscopy to estimate the chemical composition of bamboo (Neosinocalamus affinis Keng)
- Chemical modification of lignin assisted by microwave irradiation
- Acidic oxidation of kraft lignin into aromatic monomers catalyzed by transition metal salts
- Effect of Physisporinus vitreus on wood properties of Norway spruce. Part 1: Aspects of delignification and surface hardness
- Effect of Physisporinus vitreus on wood properties of Norway spruce. Part 2: Aspects of microtensile strength and chemical changes
- Mode I critical stress intensity factor of wood and medium-density fiberboard measured by compact tension test
- Effect of oxalic acid pretreatment of wood chips on manufacturing medium-density fiberboard
- Experimental investigation of stress wave propagation in standing trees
- Relationships between mechanical properties of oak timber (Quercus robur L.)
- Estimating mechanical properties and specific gravity for five-year-old Eucalyptus tereticornis having broad moisture content range by NIR spectroscopy
- Effect of morphological variability of incrusted pit membranes on efficiency of transverse compression to improve liquid uptake
- Short Notes
- Performance of biopolymer films with reinforcing cellulose-containing fillers from pine pulp and bark and birch sawdust
- Efficacy of two organic biocides with co-added antioxidants
Articles in the same Issue
- Original Papers
- Lignocellulosic biorefinery: process integration of hydrolysis and fermentation (SSF process)
- Study of stilbene and resin acid content of Scots pine heartwood by electrical impedance spectroscopy (EIS)
- Radical scavenging characteristics of condensed tannins from barks of various tree species compared with quebracho wood tannin
- Two-step hydrolysis of nipa (Nypa fruticans) frond as treated by semi-flow hot-compressed water
- Effect of acetic acid addition on chemical conversion of woods as treated by semi-flow hot-compressed water
- Oxidative cleavage of non-phenolic β-O-4 lignin model dimers by an extracellular aromatic peroxygenase
- Surface chemistry of vessel elements by FE-SEM, μ-XPS and ToF-SIMS
- Application of FT-NIR-DR and FT-IR-ATR spectroscopy to estimate the chemical composition of bamboo (Neosinocalamus affinis Keng)
- Chemical modification of lignin assisted by microwave irradiation
- Acidic oxidation of kraft lignin into aromatic monomers catalyzed by transition metal salts
- Effect of Physisporinus vitreus on wood properties of Norway spruce. Part 1: Aspects of delignification and surface hardness
- Effect of Physisporinus vitreus on wood properties of Norway spruce. Part 2: Aspects of microtensile strength and chemical changes
- Mode I critical stress intensity factor of wood and medium-density fiberboard measured by compact tension test
- Effect of oxalic acid pretreatment of wood chips on manufacturing medium-density fiberboard
- Experimental investigation of stress wave propagation in standing trees
- Relationships between mechanical properties of oak timber (Quercus robur L.)
- Estimating mechanical properties and specific gravity for five-year-old Eucalyptus tereticornis having broad moisture content range by NIR spectroscopy
- Effect of morphological variability of incrusted pit membranes on efficiency of transverse compression to improve liquid uptake
- Short Notes
- Performance of biopolymer films with reinforcing cellulose-containing fillers from pine pulp and bark and birch sawdust
- Efficacy of two organic biocides with co-added antioxidants
