Home Life Sciences Possibilities for removal of chlorinated dye Mordant Blue 9 from model waste water‡
Article
Licensed
Unlicensed Requires Authentication

Possibilities for removal of chlorinated dye Mordant Blue 9 from model waste water

  • Miroslav Šimek , Petr Mikulášek , Petr Kalenda and Tomáš Weidlich EMAIL logo
Published/Copyright: February 2, 2016
Become an author with De Gruyter Brill

Abstract

This comparative study focused on the different methods used for the treatment of model waste water polluted with the chlorinated acid dye Mordant Blue 9. Low-cost and commercially available ionic liquids – benzalkonium chloride and Aliquat 336 – were applied as liquid ion-exchangers to precipitate the Mordant Blue 9 by way of ion pair formation between the bulky ammonium cations of ionic liquids and anions of the above dye. The decolorisation efficiency of the ionic liquid application and the effect on reduction of the absorbance, adsorbable organic halogens, chemical oxygen demand and biological oxygen demand were compared with the conventional coagulation, sorption and Fenton oxidation techniques.


Presented at the 42nd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, Slovakia, 25–29 May 2015.


Acknowledgements.

The authors wish to express their gratitude for the financial support received from the University of Pardubice and Ministry of Education, Youth and Sports (project no. SGSFChT 2015006).


Supplementary data

Supplementary data associated with this article (Possibilities of chlorinated dye Mordant Blue 9 removal from model waste water) can be found in the online version of this paper (DOI: 10.1515/chempap-2015-0225).


References

Aksu, Z., Ertuğrul, S., & Dönmez, G. (2009). Single and binary chromium(VI) and Remazol Black B biosorption properties of Phormidium sp. Journal of Hazardous Materials, 168, 310–318. DOI: 10.1016/j.jhazmat.2009.02.027.10.1016/j.jhazmat.2009.02.027Search in Google Scholar

Álvarez, M. S., Moscoso, F., Rodríguez, A., Sanromán, M. A., & Deive, F. J. (2013). Novel physico-biological treatment for the remediation of textile dyes-containing industrial effluents. Bioresource Technology, 146, 689–695. DOI: 10.1016/j.biortech.2013.07.137.10.1016/j.biortech.2013.07.137Search in Google Scholar

Borodkin, V. F. (1987). Chemistry of organic dyes. Prague, Czech Republic: SNTL.Search in Google Scholar

British Standards Institution (1998). Water quality. Determination of biochemical oxygen demand after n days (BODn). Dilution and seeding method with allylthiourea addition. BS EN 1899-1:1998, BS 6068-2.63:1998. London, UK: British Standards Institution.Search in Google Scholar

Chun, S. K., Dzyuba, S. V., & Bartsch, R. A. (2001). Influence of sturctural variation in room-temperature ionic liquids on the selectivity and eficiency of competitive alkali metal salt extraction by a crown ether. Analytical Chemistry, 73, 3737– 3741. DOI: 10.1021/ac010061v.10.1021/ac010061vSearch in Google Scholar

Czech Standards Institute (1989). Water quality – Determination of the chemical oxygen demand. ČSN ISO 6060. Praha, Czech Republic: Czech Standards Institute.Search in Google Scholar

Freemantle, M. (1998). Designer solvents. Ionic liquids may boost clean technology development. Chemical & Engineering News, 76(13), 32–37. DOI: 10.1021/cen-v076n013.p032.10.1021/cen-v076n013.p032Search in Google Scholar

Gordon, P. F., & Gregory, P. (1983). Azo dyes. In P. F. Gordon, & P. Gregory (Eds.), Organic chemistry in colour (pp. 95– 162). Berlin, Germany: Springer. DOI: 10.1007/978-3-642-82959-8.10.1007/978-3-642-82959-8Search in Google Scholar

Koprivanac, N., Kušić, H., Vujević, D., Peternel, I., & Locke, B. R. (2005). Influence of iron on degradation of organic dyes in corona. Journal of Hazardous Materials, 117, 113–119. DOI: 10.1016/j.jhazmat.2004.03.023.10.1016/j.jhazmat.2004.03.023Search in Google Scholar

Meindersma, G., Maase, M., & De Haan, A. (2007). Ullmann’s encyklopedia of industrial chemistry. Weinheim, Germany: Wiley.Search in Google Scholar

Mikulášek, P., & Cuhorka, J. (2010). Nanofiltration in the manufacture of liquid dyes production. Water Science & Technology, 61, 1865–1873. DOI: 10.2166/wst.2010.871.10.2166/wst.2010.871Search in Google Scholar

Namasivayam, C., & Kavitha, D. (2002). Removal of Congo Red from water by adsorption onto activated carbon prepared from coir pith, an agricultural solid waste. Dyes and Pigments, 54, 47–58. DOI: 10.1016/s0143-7208(02)00025-6.10.1016/s0143-7208(02)00025-6Search in Google Scholar

Natarajan, T. S., Bajaj, H. C., & Tayade, R. J. (2014). Preferential adsorption behavior of methylene blue dye onto surface hydroxyl group enriched TiO2 nanotube and its photo-catalytic regeneration. Journal of Colloid and Interface Science, 433, 104–114. DOI: 10.1016/j.jcis.2014.07.019.10.1016/j.jcis.2014.07.019Search in Google Scholar PubMed

Pakshirajan, K., & Singh, S. (2010). Decolorization of synthetic wastewater containing azo dyes in a batch-operated rotating biological contactor reactor with the immobilized fungus Phanerochaete chrysosporium. Industrial & Engineering Chemistry Research, 49, 7484–7487. DOI: 10.1021/ie1007079.10.1021/ie1007079Search in Google Scholar

Seddon, K. R. (1997). Ionic liquids for clean technology. Journal of Chemical Technology & Biotechnology, 68, 351–356. DOI: 10.1002/(sici)1097-4660(199704)68:4<351::aid-jctb613>3.0. co;2-4.10.1002/(sici)1097-4660(199704)68:4<351::aid-jctb613>3.0. co;2-4Search in Google Scholar

Sun, X. Q., Ji, Y., Guo, L., Chen, J., & Li, D. Q. (2011). A novel ammonium ionic liquid based extraction strategy for separating scandium from yttrium and lanthanides. Separation and Purification Technology, 81, 25–30. DOI: 10.1016/j.seppur.2011.06.034.10.1016/j.seppur.2011.06.034Search in Google Scholar

Tayade, R. J., Natarajan, T. S., Bajaj, H. C. (2009). Photocatalytic degradation of methylene blue using ultraviolet light emitting diodes. Industrial & Engineering Chemistry Research, 48, 10262–10267. DOI: 10.1021/ie9012437.10.1021/ie9012437Search in Google Scholar

Wawrzkiewicz, M. (2012). Anion exchange resins as effective sorbents for acidic dye removal from aqueous solutions and wastewaters. Solvent Extraction and Ion Exchange, 30, 507– 523. DOI: 10.1080/07366299.2011.639253.10.1080/07366299.2011.639253Search in Google Scholar

Weidlich, T., & Martínková, J. (2012). Application of tetraphenyl- and ethylriphenylphosphonium salts for separation of reactive dyes from aqueous solution. Separation Science and Technology, 47, 1310–1315. DOI: 10.1080/01496395.2012. 672527.10.1080/01496395.2012.672527Search in Google Scholar

Weidlich, T., & Martínková, J. (2013). CZ Patent: CZ201203 59A. Praha, Czech Republic: Úřad průmyslového vlastnictví.Search in Google Scholar

Weidlich, T., Prokeš, L., & Pospíšilová, D. (2013). Debromi-nation of 2,4,6-tribromophenol coupled with biodegradation. Central European Journal of Chemistry, 11, 979–987. DOI: 10.2478/s11532-013-0231-6.10.2478/s11532-013-0231-6Search in Google Scholar

Weidlich, T., Opršal, J., Krejčová, A., & Jašúrek, B. (2015). Effect of glucose on lowering Al-Ni alloy consumption in dehalogenation of halogenoanilines. Monatshefte für Chemie – Chemical Monthly, 146, 613–620. DOI: 10.1007/s00706-014-1344-0.10.1007/s00706-014-1344-0Search in Google Scholar

World Dye Variety (2015). Mordant Blue 9. Retrieved April 10, 2015, from http://www.worlddyevariety.com/mordantdyes/mordant-blue-9.htmlSearch in Google Scholar

Zhu, M. G., Zhao, J. M., Li, Y. B., Mehio, N., Qi, Y. R., Liu, H. Z., & Dai, S. (2015). An ionic liquid-based synergistic extraction strategy for rare earths. Green Chemistry, 17, 2981– 2993. DOI: 10.1039/c5gc00360a.10.1039/c5gc00360aSearch in Google Scholar

Received: 2015-6-15
Revised: 2015-9-3
Accepted: 2015-9-19
Published Online: 2016-2-2
Published in Print: 2016-4-1

© 2015 Institute of Chemistry, Slovak Academy of Sciences

Articles in the same Issue

  1. Original Paper
  2. Prevention of degradation of γ-irradiated EPDM using phenolic antioxidants
  3. Original Paper
  4. Differentiation of black, green, herbal and fruit bagged teas based on multi-element analysis using inductively-coupled plasma atomic emission spectrometry
  5. Original Paper
  6. Reaction mechanisms of carbon dioxide methanation
  7. Review
  8. Power consumption and gas–liquid dispersion in turbulently agitated vessels with vertical dual-array tubular coil baffles
  9. Short Communication
  10. Tannins analysis from different medicinal plants extracts using MALDI-TOF and MEKC
  11. Original Paper
  12. Trihexyl(tetradecyl)phosphonium bromide as extractant for Rh(III), Ru(III) and Pt(IV) from chloride solutions
  13. Original Paper
  14. Synthesis of Fe3O4–Ag nanocomposites and their application to enzymeless hydrogen peroxide detection
  15. Original Paper
  16. Possibilities for removal of chlorinated dye Mordant Blue 9 from model waste water
  17. Review
  18. Preparation and properties of gelatin films incorporated with N-hydroxysuccinimide-activated end-bit binary acid
  19. Original Paper
  20. Synthesis and properties of novel reusable nano-ordered KIT-5-N-sulfamic acid as a heterogeneous catalyst for solvent-free synthesis of 2,4,5-triaryl-1 H-imidazoles
  21. Short Communication
  22. Prediction of power consumption in mechanically agitated gassed reactor in viscous batch
  23. Original Paper
  24. Hydrogel supported chiral imidazolidinone for organocatalytic enantioselective reduction of olefins in water
  25. Original Paper
  26. Continuous synthesis of N-ethylethylenediamine over supported Cu–Zn–La catalysts
  27. Preface
  28. Enzyme-assisted extraction of citrus essential oil
  29. Preface
  30. Experimental investigations of liquid flow in pipe with flat internal baffles
Downloaded on 28.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/chempap-2015-0225/html
Scroll to top button