Home Modelling of microstructural evolution on complex paths of large plastic deformation
Article
Licensed
Unlicensed Requires Authentication

Modelling of microstructural evolution on complex paths of large plastic deformation

Dedicated to Prof. Dr. F. D. Fischer on the occasion of his 70th birthday
  • Henryk Petryk and Stanisław Stupkiewicz
Published/Copyright: May 18, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 103 Issue 3

Abstract

A procedure for the modelling of microstructural changes induced by non-uniform large plastic deformation of metals is developed. For a given plastic working process, a set of deformation paths for different initial locations of a material element is generated first for a non-hardening material by using the finite element method. Next, changes of a cellular microstructure and related hardening effects along each path are calculated by using a recently proposed model. The procedure is applied to a non-conventional process of cold extrusion assisted by cyclic rotation of the die. The evolution of microstructural parameters, their effect on strain hardening and a distribution map over the specimen cross-section are calculated.

Keywords: Non-uniform deformation; Dislocation cells; Grain refinement; Hardening; Quantitative prediction
∗ Correspondence address, Prof. H. Petryk, Institute of Fundamental Technological Research (IPPT), Polish Academy of Sciences, Pawinskiego 5B, 02-106 Warsaw, Poland, Tel.: +48 22 8261281, Fax: +48 22 8269815. E-mail:

Refrences

[1] Q.Liu, D.Juul Jensen, N.Hansen: Acta Mater.46 (1998) 5819. DOI:10.1016/S1359-6454(98)00229-810.1016/S1359-6454(98)00229-8Search in Google Scholar

[2] D.A.Hughes, N.Hansen: Acta Mater.48 (2000) 2985. DOI:10.1016/S1359-6454(00)00082-310.1016/S1359-6454(00)00082-3Search in Google Scholar

[3] Q.Liu, X.Huang, D.J.Lloyd, N.Hansen: Acta Mater.50 (2002) 3789. DOI:10.1016/S1359-6454(02)00174-X10.1016/S1359-6454(02)00174-XSearch in Google Scholar

[4] Y.Iwahashi, Z.Horita, M.Nemoto, T.G.Langdon: Acta Mater.45 (1997) 4733. DOI:10.1016/S1359-6454(97)00100-610.1016/S1359-6454(97)00100-6Search in Google Scholar

[5] Y.Iwahashi, Z.Horita, M.Nemoto, T.G.Langdon: Metall. Mater. Trans. A29 (1998) 2503. DOI:10.1007/s11661-998-0222-y10.1007/s11661-998-0222-ySearch in Google Scholar

[6] M.Richert, Q.Liu, N.Hansen: Mater. Sci. Eng. A260 (1999) 275. DOI:10.1016/S0921-5093(98)00988-510.1016/S0921-5093(98)00988-5Search in Google Scholar

[7] A.Yamashita, D.Yamaguchi, Z.Horita, T.G.Langdon: Mater. Sci. Eng. A287 (2000) 100. DOI:10.1016/S0921-5093(00)00836-410.1016/S0921-5093(00)00836-4Search in Google Scholar

[8] M.Richert, J.Richert, S.Hawrykiewicz, A.Wusatowska: In Z_ ynieria Materiaowa5 (2001) 776.Search in Google Scholar

[9] S.D.Terhune, D.L.Swisher, K.Oh-ishi, T.G.Langdon, T.R.McNelley: Metall. Mater. Trans. A33 (2002) 2173. DOI:10.1007/s11661-002-0049-x10.1007/s11661-002-0049-xSearch in Google Scholar

[10] P.B.Prangnell, J.R.Bowen, P.J.Apps: Mater. Sci. Eng. A 375 –377 (2004) 178. DOI:10.1016/j.msea.2003.10.17010.1016/j.msea.2003.10.170Search in Google Scholar

[11] K.Furuno, H.Akamatsu, K.Oh-ishi, M.Furukawa, Z.Horita, T.G.Langdon: Acta Mater.52 (2004) 2497. DOI:10.1016/j.actamat.2004.01.04010.1016/j.actamat.2004.01.040Search in Google Scholar

[12] R.Z.Valiev, T.G.Langdon: Progr. Mater. Sci.51 (2006) 881. DOI:10.1016/j.pmatsci.2006.02.00310.1016/j.pmatsci.2006.02.003Search in Google Scholar

[13] D.Orlov, Y.Beygelzimer, S.Synkov, V.Varyukhin, N.Tsuji, Z.Horita: Mater. Sci. Eng. A519 (2009) 105a. DOI:10.1016/j.msea.2009.06.00510.1016/j.msea.2009.06.005Search in Google Scholar

[14] H.Petryk, S.Stupkiewicz: Mater. Sci. Eng. A444 (2007) 214. DOI:10.1016/j.msea.2006.08.07610.1016/j.msea.2006.08.076Search in Google Scholar

[15] J.L.Chaboche: Int. J. Plasticity2 (1986) 149. DOI:10.1016/0749-6419(86)90010-010.1016/0749-6419(86)90010-0Search in Google Scholar

[16] Y.Estrin, L.S.Toth, A.Molinari, Y.Brechet: Acta Mater.46 (1998) 5509. DOI:10.1016/S1359-6454(98)00196-710.1016/S1359-6454(98)00196-7Search in Google Scholar

[17] N.Hansen, X.Huang, D.A.Hughes: Mater. Sci. Eng. A317 (2001) 3. DOI:10.1016/S0921-5093(01)01191-110.1016/S0921-5093(01)01191-1Search in Google Scholar

[18] B.Peeters, M.Seefeldt, C.Teodosiu, S.R.Kalidindi, P.van Houtte, E.Aernoudt: Acta Mater.49 (2001) 1607. DOI:10.1016/S1359-6454(01)00066-010.1016/S1359-6454(01)00066-0Search in Google Scholar

[19] R.Sedlacek, W.Blum, J.Kratochvil, S.Forest: Metall. Mater. Trans. A33 (2002) 319. DOI:10.1007/s11661-002-0093-610.1007/s11661-002-0093-6Search in Google Scholar

[20] U.F.Kocks, H.Mecking: Progr. Mater. Sci.48 (2003) 171. DOI:10.1016/S0079-6425(02)00003-810.1016/S0079-6425(02)00003-8Search in Google Scholar

[21] D.Orlov, Y.Todaka, M.Umemoto, N.Tsuji: Mater. Sci. Eng. A499 (2009) 427 b. DOI:10.1016/j.msea.2008.09.03610.1016/j.msea.2008.09.036Search in Google Scholar

[22] D.Orlov, Y.Todaka, M.Umemoto, Y.Beygelzimer, Z.Horita, N.Tsuji: Mater. Sci. Forum604–605 (2009) 171c. DOI:10.4028/www.scientific.net/MSF.604-605.17110.4028/www.scientific.net/MSF.604-605.171Search in Google Scholar

[23] H.Petryk, S.Stupkiewicz, R.Kuziak: J. Mat. Proc. Technol.204 (2008) 255. DOI:10.1016/j.jmatprotec.2007.11.06810.1016/j.jmatprotec.2007.11.068Search in Google Scholar

[24] L.S.Toth, Y.Estrin, R.Lapovok, C.Gu: Acta Mater.58 (2010) 1782. DOI:10.1016/j.actamat.2009.11.02010.1016/j.actamat.2009.11.020Search in Google Scholar

[25] A.Korbel, W.Bochniak: J. Mat. Proc. Technol.53 (1995) 229. DOI:10.1016/0924-0136(95)01980-S10.1016/0924-0136(95)01980-SSearch in Google Scholar

[26] W.Bochniak, A.Korbel: Mater. Sci. Techn.16 (2000) 664.Search in Google Scholar

[27] A.Korbel, W.Bochniak: Scripta Mater.51 (2004) 755. DOI:10.1016/j.scriptamat.2004.06.02010.1016/j.scriptamat.2004.06.020Search in Google Scholar

[28] W.Bochniak, K.Marszowski, A.Korbel: J. Mat. Proc. Technol.169 (2005) 44. DOI:10.1016/j.jmatprotec.2005.02.25810.1016/j.jmatprotec.2005.02.258Search in Google Scholar

[29] A.Z_mudzki, W.Wajda, H.Paul, M.Pietrzyk: Rudy Metale51 (2006) 260.Search in Google Scholar

[30] J.Maciejewski, Z.Mróz: J. Mat. Proc. Technol.206 (2008) 333. DOI:10.1016/j.jmatprotec.2007.12.06110.1016/j.jmatprotec.2007.12.061Search in Google Scholar

[31] J.Korelc: Comp. Mech.44 (2009) 631. DOI:10.1007/s00466-009-0395-210.1007/s00466-009-0395-2Search in Google Scholar

Received: 2010-12-10
Accepted: 2011-11-21
Published Online: 2013-05-18
Published in Print: 2012-03-01

© 2012, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Free-surface enhanced continuum model predicts size-effect for pillar compression at micro- and nano-scale
  5. Modelling of microstructural evolution on complex paths of large plastic deformation
  6. Melting temperature of metallic nanoparticles embedded in a rigid matrix
  7. On the coupled growth of oxide phases during internal oxidation of Ag–Sn–Bi alloys
  8. Phase diagram of the Sb–Te–I system and thermodynamic properties of SbTeI
  9. Pressureless co-sintering behaviour of a steel/cemented carbide component: model bimaterial
  10. Rafting structure formation during solution treatment in a nickel-based superalloy
  11. A model to calculate the viscosity of silicate melts
  12. Prediction of glass transition temperatures of aromatic heterocyclic polymers
  13. Relationship between the γ and some parameters of Fe-based bulk metallic glasses
  14. Growth of rare-earth zirconates-based pyrochlore buffer layers on YSZ for YBCO-coated conductors via chemical solution deposition
  15. Preparation and characterization of low temperature sintering nanocrystalline TiO2 prepared via the sol-gel method using titanium(IV) butoxide applicable to flexible dye sensitized solar cells
  16. Effects of preparation methods on color properties of ZnO-based nano-crystalline green pigments
  17. Effect of reaction media on the formation of CdS nanorods
  18. Effect of titanium addition on structure and properties of the as-cast high Cr–Mo white iron
  19. Effect of welding sequence on residual stress distributions in GTA welding of AA5251 plate
  20. Electrochemical machining of Al/15% SiCP composites through a response surface methodology-based approach
  21. Effects of nanoclay on rutting and fatigue resistance of bitumen binder
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.110683
Keywords for this article
Non-uniform deformation; Dislocation cells; Grain refinement; Hardening; Quantitative prediction

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Free-surface enhanced continuum model predicts size-effect for pillar compression at micro- and nano-scale
  5. Modelling of microstructural evolution on complex paths of large plastic deformation
  6. Melting temperature of metallic nanoparticles embedded in a rigid matrix
  7. On the coupled growth of oxide phases during internal oxidation of Ag–Sn–Bi alloys
  8. Phase diagram of the Sb–Te–I system and thermodynamic properties of SbTeI
  9. Pressureless co-sintering behaviour of a steel/cemented carbide component: model bimaterial
  10. Rafting structure formation during solution treatment in a nickel-based superalloy
  11. A model to calculate the viscosity of silicate melts
  12. Prediction of glass transition temperatures of aromatic heterocyclic polymers
  13. Relationship between the γ and some parameters of Fe-based bulk metallic glasses
  14. Growth of rare-earth zirconates-based pyrochlore buffer layers on YSZ for YBCO-coated conductors via chemical solution deposition
  15. Preparation and characterization of low temperature sintering nanocrystalline TiO2 prepared via the sol-gel method using titanium(IV) butoxide applicable to flexible dye sensitized solar cells
  16. Effects of preparation methods on color properties of ZnO-based nano-crystalline green pigments
  17. Effect of reaction media on the formation of CdS nanorods
  18. Effect of titanium addition on structure and properties of the as-cast high Cr–Mo white iron
  19. Effect of welding sequence on residual stress distributions in GTA welding of AA5251 plate
  20. Electrochemical machining of Al/15% SiCP composites through a response surface methodology-based approach
  21. Effects of nanoclay on rutting and fatigue resistance of bitumen binder
  22. DGM News
  23. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 25.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.110683/html
Scroll to top button