Contents

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. Free-surface enhanced continuum model predicts size-effect for pillar compression at micro- and nano-scale
5. Modelling of microstructural evolution on complex paths of large plastic deformation
6. Melting temperature of metallic nanoparticles embedded in a rigid matrix
7. On the coupled growth of oxide phases during internal oxidation of Ag–Sn–Bi alloys
8. Phase diagram of the Sb–Te–I system and thermodynamic properties of SbTeI
9. Pressureless co-sintering behaviour of a steel/cemented carbide component: model bimaterial
10. Rafting structure formation during solution treatment in a nickel-based superalloy
11. A model to calculate the viscosity of silicate melts
12. Prediction of glass transition temperatures of aromatic heterocyclic polymers
13. Relationship between the γ and some parameters of Fe-based bulk metallic glasses
14. Growth of rare-earth zirconates-based pyrochlore buffer layers on YSZ for YBCO-coated conductors via chemical solution deposition
15. Preparation and characterization of low temperature sintering nanocrystalline TiO₂ prepared via the sol-gel method using titanium(IV) butoxide applicable to flexible dye sensitized solar cells
16. Effects of preparation methods on color properties of ZnO-based nano-crystalline green pigments
17. Effect of reaction media on the formation of CdS nanorods
18. Effect of titanium addition on structure and properties of the as-cast high Cr–Mo white iron
19. Effect of welding sequence on residual stress distributions in GTA welding of AA5251 plate
20. Electrochemical machining of Al/15% SiCP composites through a response surface methodology-based approach
21. Effects of nanoclay on rutting and fatigue resistance of bitumen binder
22. DGM News
23. DGM News