Home Processing by severe plastic deformation:an ancient skill adapted for the modern world
Article
Licensed
Unlicensed Requires Authentication

Processing by severe plastic deformation:an ancient skill adapted for the modern world

  • Ruslan Z. Valiev , Kenong Xia and Terence G. Langdon
Published/Copyright: June 11, 2013
Become an author with De Gruyter Brill

Abstract

The processing of bulk solids through the application of severe plastic deformation has now become a well-established procedure for achieving grain refinement to the submicrometer or even the nanometer level. Several basic techniques are currently in place but most attention has been devoted to the procedures of equal-channel angular pressing, high-pressure torsion and accumulative roll-bonding. This paper presents an introductory overview of processing by severe plastic deformation including historical developments and recent new advances in the processing technology. Special emphasis is placed on the move towards the commercialization of the severe plastic deformation approach.


* Correspondence address Professor Kenong Xia, Department of Mechanical Engineering, University of Melbourne Victoria 3010, Australia Tel.: +61 3 8344 6664 Fax: +61 3 9347 8784 E-mail:

References

[1] R.Z.Valiev, Y.Estrin, Z.Horita, T.G.Langdon, M.J.Zehetbauer, Y.T.Zhu: JOM58 (4) (2006) 33.10.1007/s11837-006-0213-7Search in Google Scholar

[2] R.Z.Valiev, R.K.Islamgaliev, I.V.Alexandrov: Prog. Mater. Sci.45 (2000) 103.10.1016/S0079-6425(99)00007-9Search in Google Scholar

[3] J.T.Wang: Mater. Sci. Forum503–504 (2006) 363.10.4028/www.scientific.net/MSF.503-504.363Search in Google Scholar

[4] P.W.Bridgman: J. Appl. Phys.14 (1943) 273.10.1063/1.1714987Search in Google Scholar

[5] N.A.Smirnova, V.I.Levit, V.I.Pilyugin, R.I.Kuznetsov, L.S.Davydova, V.A.Sazonova: Fiz. Metal. Metalloved.61 (1986) 1170.Search in Google Scholar

[6] V.M.Segal, V.I.Reznikov, A.E.Drobyshevskiy, V.I.Kopylov: Russian Metall.1 (1981) 99.Search in Google Scholar

[7] R.Z.Valiev, O.A.Kaibyshev, R.I.Kuznetsov, R.Sh.Musalimov, N.K.Tsenev: Dokl. Akad. Nauk SSSR301 (1988) 864.Search in Google Scholar

[8] R.Z.Valiev, N.A.Krasilnikov, N.K.Tsenev: Mater Sci Eng. A137 (1991) 35.10.1016/0921-5093(91)90316-FSearch in Google Scholar

[9] R.Z.Valiev, T.G.Langdon: Prog. Mater. Sci.51 (2006) 881.10.1016/j.pmatsci.2006.02.003Search in Google Scholar

[10] Z.Horita, T.Fujinami, T.G.Langdon: Mater. Sci. Eng. A318 (2001) 34.10.1016/S0921-5093(01)01339-9Search in Google Scholar

[11] A.P.Zhilyaev, T.G.Langdon: Prog. Mater. Sci.53 (2008) 893.10.1016/j.pmatsci.2008.03.002Search in Google Scholar

[12] G.Sakai, K.Nakamura, Z.Horita, T.G.Langdon: Mater. Sci. Eng. A406 (2005) 268.10.1016/j.msea.2005.06.049Search in Google Scholar

[13] Y.Saito, N.Tsuji, M.Utsunomiya, T.Sakai, R.G.Hong: Scripta Mater.39 (1998) 1221.10.1016/S1359-6462(98)00302-9Search in Google Scholar

[14] J.Huang, Y.T.Zhu, H.Jiang, T.C.Lowe: Acta Mater.49 (2001) 1497.10.1016/S1359-6454(01)00069-6Search in Google Scholar

[15] Y.T.Zhu, H.Jiang, J.Huang, T.C.Lowe: Metall. Mater. Trans. A32 (2001) 1559.10.1007/s11661-001-0245-0Search in Google Scholar

[16] Y.Saito, H.Utsunomiya, H.Suzuki, T.Sakai: Scripta Mater.42 (2000) 1139.10.1016/S1359-6462(00)00349-3Search in Google Scholar

[17] J.C.Lee, H.K.Seok, J.Y.Suh: Acta Mater.50 (2002) 4005.10.1016/S1359-6454(02)00200-8Search in Google Scholar

[18] G.J.Raab, R.Z.Valiev, T.C.Lowe, Y.T.Zhu: Mat. Sci. Eng. A382 (2004) 30.10.1016/j.msea.2004.04.021Search in Google Scholar

[19] R.Z.Valiev, A.V.Korznikov, R.R.Mulyukov: Mater. Sci Eng. A186 (1993) 141.10.1016/0921-5093(93)90717-SSearch in Google Scholar

[20] R.Z.Valiev, R.S.Mishra, J.Grosa, A.K.Mukherjee: Scripta Mater.34 (1996) 1443.10.1016/1359-6462(95)00676-1Search in Google Scholar

[21] A.R.Yavari, W.J.Botta, C.A.D.Rodriguez, C.Cardoso, R.Z.Valiev: Scripta Mater.46 (2002) 711.10.1016/S1359-6462(02)00057-XSearch in Google Scholar

[22] R.Z.Valiev: Adv. Eng. Mater.5 (2003) 296.10.1002/adem.200310089Search in Google Scholar

[23] N.Boucharat, R.Hebert, H.Rösner, R.Valiev, G.Wilde: Scripta Mater.53 (2005) 823.10.1016/j.scriptamat.2005.06.004Search in Google Scholar

[24] R.Z.Valiev, V.G.Pushin, D.V.Gunderov, A.G.Popov: Doklady RAN398 (2004) 1.Search in Google Scholar

[25] A.V.Sergueeva, C.Song, R.Z.Valiev, A.K.Mukherjee: Mater. Sci. Eng. A339 (2003) 159.10.1016/S0921-5093(02)00122-3Search in Google Scholar

[26] D.G.Morris: Mechanical Behaviour of Nanostructured Materials, Trans. Tech., Uetikon-Zurich, Switzerland (1998).Search in Google Scholar

[27] C.C.Koch: Scripta Mater.49 (2003) 657.10.1016/S1359-6462(03)00394-4Search in Google Scholar

[28] R.Z.Valiev: Nature Mater.3 (2004) 511. PMid:15286754;10.1038/nmat1180Search in Google Scholar

[29] R.Z.Valiev, I.V.Alexandrov, T.C.Lowe, Y.T.Zhu: J. Mater. Res.17 (2002) 5.10.1557/JMR.2002.0002Search in Google Scholar

[30] Z.Horita, K.Ohashi, T.Fujita, K.Kaneko, T.G.Langdon: Adv. Mater.17 (2005) 1599.10.1002/adma.200500069Search in Google Scholar

[31] Y.Wang, M.Chen, F.Zhou, E.Ma: Nature419 (2002) 912. PMid:12410306;10.1038/nature01133Search in Google Scholar

[32] R.Z.Valiev, A.V.Sergueeva, A.K.Mukherjee: Scripta Mater.49 (2003) 669.10.1016/S1359-6462(03)00395-6Search in Google Scholar

[33] E.Ma: Scripta Mater.49 (2003) 663.10.1016/S1359-6462(03)00396-8Search in Google Scholar

[34] Y.M.Wang, E.Ma: Acta Mater.52 (2004) 1699.10.1016/j.actamat.2003.12.022Search in Google Scholar

[35] E.Ma: JOM58 (4) (2006) 49.10.1007/s11837-006-0215-5Search in Google Scholar

[36] X.Zhang, H.Wang, R.O.Scattergood, J.Narayan, C.C.Koch, A.V.Sergueeva, A.K.Mukherjee: Acta Mater.50 (2002) 4823.10.1016/S1359-6454(02)00349-XSearch in Google Scholar

[37] H.Mughrabi, H.W.Höppel: Z. Metallkd.94 (2003) 1079.Search in Google Scholar

[38] Y.S.Park, K.H.Chung, N.J.Kim, E.J.Lavernia: Mater. Sci. Eng. A374 (2004) 211.10.1016/j.msea.2004.02.013Search in Google Scholar

[39] L.Lu, Y.Shen, X.Chen, L.Qian, K.Lu: Science304 (2004) 422. PMid:15031435;10.1126/science.1092905Search in Google Scholar

[40] E.Ma, Y.M.Wang, Q.H.Lu, M.L.Sui, L.Lu, K.Lu: Appl. Phys. Lett.85 (2004) 4932.10.1063/1.1814431Search in Google Scholar

[41] R.Z.Valiev, E.V.Kozlov, Yu.F.Ivanov, J.Lian, A.A.Nazarov, B.Baudelet: Acta Metall. Mater.42 (1994) 2467.10.1016/0956-7151(94)90326-3Search in Google Scholar

[42] T.G.Nieh, J.Wadsworth, O.D.Sherby: Superplasticity in Metals and Ceramics, Cambridge Univ. Press, Cambridge (1997).10.1017/CBO9780511525230Search in Google Scholar

[43] H.Van Swygenhoven: Science296 (2002) 66. PMid:11935012;10.1126/science.1071040Search in Google Scholar

[44] V.Yamakov, D.Wolf, S.R.Phillpot, A.K.Mukherjee, H.Gleiter: Nature Mater.1 (2002) 1. PMid:12618848;10.1038/nmat700Search in Google Scholar

[45] J.Schiøtz, K.W.Jacobsen: Science301 (2003) 1357. PMid:12958354;10.1126/science.1086636Search in Google Scholar

[46] M.G.Zelin, N.A.Krasilnikov, R.Z.Valiev, M.W.Grabski, H.S.Yang, A.K.Mukherjee: Acta Metall. Mater.42 (1994) 19.10.1016/0956-7151(94)90054-XSearch in Google Scholar

[47] H.Hahn, K.A.Padmanabhan: Phil. Mag. B76 (1997) 559.10.1080/01418639708241122Search in Google Scholar

[48] M.Chen, E.Ma, K.J.Hemker, H.Sheng, Y.Wang, X.Cheng: Science300 (2003) 1275. PMid:12714676;10.1126/science.1083727Search in Google Scholar

[49] X.Z.Liao, F.Zhou, E.J.Lavernia, D.W.He, Y.T.Zhu: Appl. Phys. Lett.83 (2003) 5062.10.1063/1.1633975Search in Google Scholar

[50] H.W.HöppelZ.M.Zhou, H.Mughrabi, R.Z.Valiev: Phil Mag. A82 (2002) 1781.10.1080/01418610208235689Search in Google Scholar

[51] A.Vinogradov, S.Hashimoto: Adv. Eng. Mater.5 (2003) 351.10.1002/adem.200310078Search in Google Scholar

[52] K.Xia: Mater. Sci. Forum579 (2008) 61.10.4028/www.scientific.net/MSF.579.61Search in Google Scholar

[53] K.Xia, W.Xu, X.Wu, S.Goussous: Mater. Sci. Forum584–586 (2008) 119.10.4028/www.scientific.net/MSF.584-586.119Search in Google Scholar

[54] R.W.Hayes, R.Rodriguez, E.J.Lavernia: Acta Mater.49 (2001) 4055.10.1016/S1359-6454(01)00278-6Search in Google Scholar

[55] W.Xu, T.Honma, X.Wu, S.P.Ringer, K.Xia: Appl. Phys. Lett.91 (2007) 031901.10.1063/1.2755923Search in Google Scholar

[56] W.Xu, X.Wu, D.Sadedin, G.Wellwood, K.Xia: Appl. Phys. Lett.92 (2008) 011924.10.1063/1.2832657Search in Google Scholar

[57] K.Xia, X.Wu: Scripta Mater.53 (2005) 1225.10.1016/j.scriptamat.2005.08.012Search in Google Scholar

[58] M.Haouaoui, I.Karaman, H.J.Maier, K.T.Hartwig: Metall. Mater. Trans. A35 (2004) 2935.10.1007/s11661-004-0241-2Search in Google Scholar

[59] M.Moss, R.Lapovok, C.J.Bettles: JOM59(8) (2007) 84.10.1007/s11837-007-0105-5Search in Google Scholar

[60] R.Lapovok, D.Tomus, C.Bettles: Scripta Mater.58 (2008) 898.10.1016/j.scriptamat.2008.01.010Search in Google Scholar

[61] A.V.Korznikov, I.M.Safarov, D.V.Laptionok, R.Z.Valiev: Acta Metall. Mater.39 (1991) 3193.10.1016/0956-7151(91)90054-5Search in Google Scholar

[62] K.Xia, X.Wu, T.Honma, S.P.Ringer: J. Mater. Sci.42 (2007) 1551.10.1007/s10853-006-0819-8Search in Google Scholar

[63] S.C.Tjong: Adv. Eng. Mater.9 (2007) 639.10.1002/adem.200700106Search in Google Scholar

[64] S.Goussous, W.Xu, X.Wu, K.Xia: Comp. Sci. Technol.69 (2009) 1997.10.1016/j.compscitech.2009.05.004Search in Google Scholar

[65] I.Sabirov, R.Pippan: Scripta Mater.52 (2005) 1293.10.1016/j.scriptamat.2005.02.017Search in Google Scholar

[66] D.B.Witkin, E.J.Lavernia: Prog. Mater. Sci.51 (2006) 1.10.1016/j.pmatsci.2005.04.004Search in Google Scholar

[67] Z.Lee, F.Zhou, R.Z.Valiev, E.J.Lavernia, S.R.Nutt: Scripta Mater.51 (2004) 209.10.1016/j.scriptamat.2004.04.016Search in Google Scholar

[68] B.Q.Han, Z.Lee, S.R.Nutt, E.J.Lavernia, F.A.Mohamed: Metall. Mater. Trans. A34 (2003) 603.10.1007/s11661-003-0095-zSearch in Google Scholar

[69] T.C.Lowe: JOM58(4) (2006) 28.10.1007/s11837-006-0212-8Search in Google Scholar

[70] R.Z.Valiev, M.J.Zehetbauer, Y.Estrin, H.W.Höppel, Y.Ivanisenko, H.Hahn, G.Wilde, H.J.Roven, X.Sauvage, T.G.Langdon: Adv. Eng. Mater.9 (2007) 527.10.1002/adem.200700078Search in Google Scholar

[71] D.M.Brunette, P.Tengvall, M.Textor, P.Thomsen (Eds.): Titanium in Medicine, Springer, Heidelberg, 2001.10.1007/978-3-642-56486-4Search in Google Scholar

[72] V.V.Stolyarov, Y.T.Zhu, I.V.Alexandrov, T.C.Lowe, R.Z.Valiev: Mater. Sci. Eng. A343 (2003) 43.10.1016/S0921-5093(02)00366-0Search in Google Scholar

[73] R.Z.Valiev, I.P.Semenova, V.V.Latysh, H.Rack, T.C.Lowe, J.Petruzelka, L.Dluhos, D.Hrusak, J.Sochova: Adv. Eng. Mater. B15 (2008) 10.Search in Google Scholar

[74] C.N.Elias, J.H.C.Lima, R.Valiev, M.A.Meyers: JOM60(3) (2008) 46.10.1007/s11837-008-0031-1Search in Google Scholar

[75] Z.Horita, M.Furukawa, M.Nemoto, A.J.Barnes, T.G.Langdon: Acta Mater.48 (2000) 3633.10.1016/S1359-6454(00)00182-8Search in Google Scholar

[76] H.Akamatsu, T.Fujinami, Z.Horita, M.Nemoto, T.G.Langdon: Scripta Mater.44 (2001) 759.10.1016/S1359-6462(00)00666-7Search in Google Scholar

[77] K.T.Park, H.J.Lee, C.S.Lee, W.J.Nam, D.H.Shin: Scripta Mater.51 (2004) 479.Search in Google Scholar

[78] I.Nikulin, R.Kaibyshev, T.Sakai: Mater. Sci. Eng. A407 (2005) 62.10.1016/j.msea.2005.06.014Search in Google Scholar

[79] R.Z.Valiev, D.A.Salimonenko, N.K.Tsenev, P.B.Berbon, T.G.Langdon: Scripta Mater.37 (1997) 1945.Search in Google Scholar

[80] A.V.Korznikov, I.M.Safarov, A.A.Nazarov, R.Z.Valiev: Mat. Sci. Eng A206 (1996) 39.10.1016/0921-5093(95)09981-6Search in Google Scholar

[81] M.Z.Borisova, S.P.Yakovleva, A.M.Ivanov: Solid State Phenom.14 (2006) 97.10.4028/www.scientific.net/SSP.114.97Search in Google Scholar

[82] R.Lapovok, R.Cottam, G.Stecher, R.Deam, E.Summerville, in: T.C.Lowe, R.Z.Valiev (Eds.), Investigations and Applications of Severe Plastic Deformation, Kluwer, Dordrecht, The Netherlands (2000) 303.10.1007/978-94-011-4062-1_39Search in Google Scholar

Received: 2009-3-29
Accepted: 2009-9-15
Published Online: 2013-06-11
Published in Print: 2009-12-01

© 2009, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Review of IJMR's centenary year
  5. Proceedings of the SPD Workshop, Melbourne, June 2009
  6. Feature
  7. Processing by severe plastic deformation:an ancient skill adapted for the modern world
  8. Review
  9. Grain refinement and growth induced by severe plastic deformation
  10. Basic
  11. The nature of grain refinement in equal-channel angular pressing: a comparison of representative fcc and hcp metals
  12. Ductility of ultrafine-grained copper processed by equal-channel angular pressing
  13. Technical parameters affecting grain refinement by high pressure torsion
  14. Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion
  15. Softening of high purity aluminum and copper processed by high pressure torsion
  16. An atom probe characterisation of grain boundaries in an aluminium alloy processed by equal-channel angular pressing
  17. Deformation mechanisms in an ultra-fine grained Al alloy
  18. Applied
  19. The effect of back pressure on mechanical properties of an Mg-3 wt.% Al-1 wt.% Zn alloy with single pass equal channel angular pressing
  20. Nanostructuring of Ti-alloys by SPD processing to achieve superior fatigue properties
  21. Improvement in the strength and ductility of Al-Mg-Mn alloys with Zr and Sc additions by equal channel angular pressing
  22. The effect of initial microstructure and processing temperature on microstructure and texture in multilayered Al/Al(Sc) ARB sheets
  23. Plastic deformation analysis of accumulative back extrusion
  24. The possibility of synthesizing bulk nanostructured or ultrafine structured metallic materials by consolidation of powders using high strain powder compact forging
  25. Use of residual hydrogen to produce CP-Ti powder compacts for low temperature rolling
  26. Mg alloy for hydrogen storage processed by SPD
  27. DGM News
  28. Personal/Conferences/Imprint
Downloaded on 16.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.110233/pdf
Scroll to top button