Startseite Modeling creep in a thick composite cylinder subjected to internal and external pressures
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Modeling creep in a thick composite cylinder subjected to internal and external pressures

  • Tejeet Singh und Vinay K. Gupta
Veröffentlicht/Copyright: 15. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 101 Heft 2

Abstract

A mathematical model to describe secondary creep in a thick composite cylinder made of Al–SiCp and subjected to both internal and external pressures has been developed. The creep behavior of the composite has been described by a threshold stress based creep law with a stress exponent of 5. The model developed has been used to investigate the effect of varying size and content of the SiCp dispersoid on the stresses and strain rates in a composite cylinder. It is observed that the stress distributions in the cylinder do not have significant variation with varying size and content of the SiCp. Unlike stresses, the strain rates in the cylinder are reduced to a significant extent by decreasing the size of SiCp and increasing the content of SiCp.

Keywords: Modeling; Second stage creep; Composite; Cylinder; Pressure
∗ Correspondence address, Dr. Vinay K. Gupta Reader (Mechanical Eng.) University College of Eng., Punjabi University, Patiala-147002 (Punjab), India Tel.: +91 175 2280 166 Fax: +91 175 3046 333 E-mail:

References

[1] V.K.Arya, N.S.Bhatnagar: J. Mech. Eng. Sci.18 (1976) 1.10.1243/JMES_JOUR_1976_018_003_02Suche in Google Scholar

[2] C.BechtIV, Y.Chen: J. Pressure Vessel Technol.122 (2000) 121.10.1115/1.556161Suche in Google Scholar

[3] S.K.Gupta, S.Pathak: Indian J. Pure Appl. Math.32 (2001) 237.Suche in Google Scholar

[4] J.Perry, J.Aboudi: J. Pressure Vessel Technol.125 (2003) 248.10.1115/1.1593078Suche in Google Scholar

[5] J.M.Bergheau, J.Devaux, G.Mottet, P.Gilles: J. Pressure Vessel Technol.126 (2004) 163.10.1115/1.1687799Suche in Google Scholar

[6] Y.Tachibana, T.Iyoku: Nuclear Eng. Des.233 (2004) 261.10.1016/j.nucengdes.2004.08.013Suche in Google Scholar

[7] S.Hagihara, N.Miyazaki: Nuclear Eng. Des.238 (2008) 33.10.1016/j.nucengdes.2007.04.009Suche in Google Scholar

[8] C.D.Weir: J. Appl. Mech.24 (1957) 464.10.1115/1.4011565Suche in Google Scholar

[9] R.H.King, W.W.Mackie: J. Basic Eng.89 (1967) 877.10.1115/1.3609729Suche in Google Scholar

[10] D.H.Pai: Int. J. Mech. Sci.9 (1967) 335.10.1016/0020-7403(67)90039-2Suche in Google Scholar

[11] F.P.J.Rimrott: J. Appl. Mech.26 (1959) 271.10.1115/1.4011994Suche in Google Scholar

[12] N.S.Bhatnagar, S.K.Gupta: J. Physical Soc. Japan27 (1969) 1655.10.1143/JPSJ.27.1655Suche in Google Scholar

[13] R.G.Sim, R.K.Penny: Int. J. Mech. Sci.13 (1971) 987.10.1016/0020-7403(71)90023-3Suche in Google Scholar

[14] N.S.Bhatnagar, V.K.Arya: Int. J. Non Linear Mechanics.9 (1974) 127.10.1016/0020-7462(74)90004-3Suche in Google Scholar

[15] J.J.Chen, S.T.Tu, F.Z.Xuan, Z.D.Wang: J. Strain Analysis42 (2007) 62.10.1243/03093247JSA237Suche in Google Scholar

[16] L.H.You, H.Ou, Z.Y.Zheng: Composite Structures78 (2007) 285.10.1016/j.compstruct.2005.10.002Suche in Google Scholar

[17] T.G.Nieh: Metall. Trans. A15 (1984) 139.10.1007/BF02644396Suche in Google Scholar

[18] A.K.Roy, S.W.Tsai: J. Pressure Vessel Technol.110 (1988) 255.10.1115/1.3265597Suche in Google Scholar

[19] Y.Fukui, N.Yamanaka, K.Wakashima: JSME A36 (1993) 156.Suche in Google Scholar

[20] R.S.Salzar, M.J.Pindera, F.W.Barton: J. Pressure Vessel Technol.118 (1996) 13.10.1115/1.2842155Suche in Google Scholar

[21] V.K.Gupta, S.B.Singh, H.N.Chandrawat, S.Ray: Metall. Mater. Trans. A35 (2004) 1381.10.1007/s11661-004-0313-3Suche in Google Scholar

[22] S.C.Tjong, Z.Y.Ma: Mater. Sci. Eng. R29 (2000) 49.10.1016/S0927-796X(00)00024-3Suche in Google Scholar

[23] Z.Y.Ma, S.C.Tjong: Composites Sci. Technol.61 (2001) 771.10.1016/S0266-3538(01)00018-5Suche in Google Scholar

[24] R.S.Mishra, A.B.Pandey: Metall. Trans.21A (1990) 2089.10.1007/BF02647258Suche in Google Scholar

[25] A.B.Pandey, R.S.Mishra, Y.R.Mahajan: Acta Metall. Mater.40 (1992) 2045.10.1016/0956-7151(92)90190-PSuche in Google Scholar

[26] D.G.Gonzalez, O.D.Sherby: Acta Metall. Mater.41 (1993) 2797.10.1016/0956-7151(93)90094-9Suche in Google Scholar

[27] A.B.Pandey, R.S.Mishra, Y.R.Mahajan: Mater. Sci. Eng. A189 (1994) 95.10.1016/0921-5093(94)90405-7Suche in Google Scholar

[28] K.T.Park, E.J.Lavernia, F.A.Mohamed: Acta Metall. Mater.38 (1990), 2149.10.1016/0956-7151(90)90082-RSuche in Google Scholar

[29] F.A.Mohamed, K.T.Park, E.J.Lavernia: Mater. Sci. Eng. A150 (1992) 21.10.1016/0921-5093(90)90004-MSuche in Google Scholar

[30] K.T.Park, F.A.Mohamed: Metall. Trans. A26 (1995) 3119.10.1007/BF02669441Suche in Google Scholar

[31] J.Cadek, H.Oikawa, V.Sustek: Mater. Sci. Eng. A190 (1995) 9.10.1016/0921-5093(94)09605-VSuche in Google Scholar

[32] H.Y.Suzumura, J.Cadek, S.J.Zhu, K.Milicka: Mater. Sci. Eng. A248 (1998) 65.10.1016/S0921-5093(98)00518-8Suche in Google Scholar

[33] Y.Li, F.A.Mohamed: Acta Mater.45 (1997) 4775.10.1016/S1359-6454(97)00130-4Suche in Google Scholar

[34] Y.Li, T.G.Langdon: Acta Mater.45 (1997) 4797.10.1016/S1359-6454(97)00132-8Suche in Google Scholar

[35] Y.Li, T.G.Langdon: Mater. Sci. Eng. A265 (1999) 276.10.1016/S0921-5093(98)01131-9Suche in Google Scholar

[36] R.Lagneborg, B.Bergman: Metal. Sci.10 (1976) 20.10.1179/030634576790431462Suche in Google Scholar

[37] G.E.Dieter: Mechanical Metallurgy, McGraw-Hill, London (1988).Suche in Google Scholar

[38] E.P.Popov: Engineering Mechanics of Solids, Pearson Education, Singapore (2001).Suche in Google Scholar

[38] A.E.Johnson, J.Henderson, B.Khan, in: Proc. Instn. Mech. Engrs.175 (1961) 1043.10.1243/PIME_PROC_1961_175_066_02Suche in Google Scholar

[40] Y.Li, T.G.Langdon: Metall. Mater. Trans. A29 (1998) 2523.10.1007/s11661-998-0224-9Suche in Google Scholar

[41] L.M.Peng, S.J.Zhu, Z.Y.Ma, J.Bi, H.R.Chen, F.G.Wang: J. Mater. Sci.33 (1998) 5643.10.1023/A:1004428602432Suche in Google Scholar

[42] L.M.Peng, S.J.Zhu, Z.Y.Ma, J.Bi, F.G.Wang, H.R.Chen, D.O.Northwood: Mater. Sci. Eng. A265 (1999) 63.10.1016/S0921-5093(99)00009-XSuche in Google Scholar

[43] B.Q.Han, T.G.Langdon: Mater. Sci. Eng. A322 (2002) 73.10.1016/S0921-5093(01)01119-4Suche in Google Scholar

[44] Y.Li, T.G.Langdon: Metall. Mater. Trans. A30 (1999) 315.10.1007/s11661-999-0320-5Suche in Google Scholar

Received: 2008-9-6
Accepted: 2009-4-16
Published Online: 2013-05-15
Published in Print: 2010-02-01

© 2010, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Materials for Information Technology
  5. Feature
  6. Advanced high-k/metal gate stack progress and challenges – a materials and process integration perspective
  7. Spintronics in metallic superconductor/ferromagnet hybrid structures
  8. Graphene metrology and devices
  9. The role of defects in resistively switching chalcogenides
  10. Materials in optical data storage
  11. Scaling effects on microstructure and reliability for Cu interconnects
  12. Effects of e-beam curing on glass structureand mechanical properties of nanoporous organosilicate thin films
  13. Printing materials for electronic devices
  14. Basic
  15. Characterisation of lead – calcium alloys ageing in anisothermal conditions by calorimetric, resistance and hardness in-situ measurements
  16. Thermodynamic predictions of Mg – Al – Ca alloy compositions amenable to semi-solid forming
  17. Capillary equilibrium in a semi-solid Al – Cu slurry
  18. A comparative study of room-temperature creep in lead-free tin-based solder alloys
  19. Modeling creep in a thick composite cylinder subjected to internal and external pressures
  20. Applied
  21. The oxidation behaviour of the 9 % Cr steel P92in CO2- and H2O-rich gases relevant to oxyfuel environments
  22. Effect of thermal and mechanical treatments on the hot working response of Mg-3Sn-1Ca alloy
  23. Structure and mechanical properties of an AlCr6Fe2Ti1 alloy produced by rapid solidification powder metallurgy method
  24. Ni2O3-modified TiO2 – xNx as efficientvisible-light photocatalysts
  25. Dependence of optical, structural and electrical properties of ZnxCd1–xS thin films prepared by co-evaporation on the composition for x = 0 – 1
  26. DGM News
  27. DGM News
https://doi.org/10.3139/146.110273
Schlagwörter für diesen Artikel
Modeling; Second stage creep; Composite; Cylinder; Pressure

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Materials for Information Technology
  5. Feature
  6. Advanced high-k/metal gate stack progress and challenges – a materials and process integration perspective
  7. Spintronics in metallic superconductor/ferromagnet hybrid structures
  8. Graphene metrology and devices
  9. The role of defects in resistively switching chalcogenides
  10. Materials in optical data storage
  11. Scaling effects on microstructure and reliability for Cu interconnects
  12. Effects of e-beam curing on glass structureand mechanical properties of nanoporous organosilicate thin films
  13. Printing materials for electronic devices
  14. Basic
  15. Characterisation of lead – calcium alloys ageing in anisothermal conditions by calorimetric, resistance and hardness in-situ measurements
  16. Thermodynamic predictions of Mg – Al – Ca alloy compositions amenable to semi-solid forming
  17. Capillary equilibrium in a semi-solid Al – Cu slurry
  18. A comparative study of room-temperature creep in lead-free tin-based solder alloys
  19. Modeling creep in a thick composite cylinder subjected to internal and external pressures
  20. Applied
  21. The oxidation behaviour of the 9 % Cr steel P92in CO2- and H2O-rich gases relevant to oxyfuel environments
  22. Effect of thermal and mechanical treatments on the hot working response of Mg-3Sn-1Ca alloy
  23. Structure and mechanical properties of an AlCr6Fe2Ti1 alloy produced by rapid solidification powder metallurgy method
  24. Ni2O3-modified TiO2 – xNx as efficientvisible-light photocatalysts
  25. Dependence of optical, structural and electrical properties of ZnxCd1–xS thin films prepared by co-evaporation on the composition for x = 0 – 1
  26. DGM News
  27. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 12.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110273/html
Button zum nach oben scrollen