Startseite Technik Effect of graphene nanoplatelets on mechanical and impact properties of an aramid/glass-reinforced epoxy composite
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of graphene nanoplatelets on mechanical and impact properties of an aramid/glass-reinforced epoxy composite

  • Nurettin Furkan Doğan ORCID logo EMAIL logo , Özkan Özbek ORCID logo und Ahmet Erkliğ ORCID logo
Veröffentlicht/Copyright: 7. April 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Materials Testing
Aus der Zeitschrift Materials Testing Band 64 Heft 4

Abstract

This study aims to characterize and evaluate the effects of graphene nanoplatelets (GnPs) added to the epoxy matrix and the fiber stacking sequence on the mechanical and impact responses of carbon/aramid hybrid composites. For this purpose, Aramid/Glass/Aramid and Glass/Aramid/Glass stacking sequences as well as full Aramid and Glass fiber configurations were used in an epoxy matrix with various contents (0.1, 0.25, 0.5 wt%) of GnPs. Tensile and flexural tests were conducted per mechanical characterization and low-velocity impact (LVI) tests with 30 J impact energy were performed by a drop-weight impact test. According to results, aramid fiber location has a significant effect on the peak load values, absorbed energy, and displacement of the hybrid composites. In addition, the inclusion of 0.25 wt% GnPs into the epoxy matrix increased the LVI properties of pure glass and hybrid fiber-reinforced composites. However, the incorporation of GnPs into the epoxy matrix caused a deterioration in the LVI properties of the aramid fiber-reinforced composite plates. Moreover, the best increase in the mechanical properties of pure and hybrid fiber-reinforced composites was obtained by adding 0.1 and 0.25% wt% GnPs into the epoxy matrix.

Keywords: aramid fiber; glass fiber; graphene nanoplatelets; hybrid fiber; low-velocity impact
Corresponding author: Nurettin Furkan Doğan, Mechanical Engineering Department, Kilis 7 Aralik University, Kilis, Turkey, E-mail:

Funding source: Gaziantep University

Award Identifier / Grant number: Project No: MF.DT.18.08

  1. Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.

  2. Research funding: This work was supported by the Gaziantep University Scientific Research Projects Coordination Unit (Project No: MF.DT.18.08).

  3. Conflict of interest statement: The authors declare no conflicts of interest regarding this article.

References

[1] W. J. Cantwell and J. Morton, “The impact resistance of composite materials – a review,” Composites, vol. 22, no. 5, pp. 347–362, 1991, https://doi.org/10.1016/0010-4361(91)90549-V.Suche in Google Scholar

[2] T. S. Reddy, P. R. S. Reddy, and V. Madhu, “Response of E-glass/epoxy and Dyneema ® composite laminates subjected to low and high velocity impact,” Proc. Eng., vol. 173, pp. 278–285, 2017, https://doi.org/10.1016/j.proeng.2016.12.014.Suche in Google Scholar

[3] M. Aktaş, C. Atas, B. M. İçten, and R. Karakuzu, “An experimental investigation of the impact response of composite laminates,” Compos. Struct., vol. 87, no. 4, pp. 307–313, 2009, https://doi.org/10.1016/j.compstruct.2008.02.003.Suche in Google Scholar

[4] Ö. Y. Bozkurt, A. Erkliğ, and M. Bulut, “Hybridization effects on charpy impact behavior of basalt/aramid fiber reinforced hybrid composite laminates,” Polym. Compos., vol. 39, no. 2, pp. 467–475, 2018, https://doi.org/10.1002/pc.23957.Suche in Google Scholar

[5] M. Bulut, M. Alsaadi, A. Erkliğ, and H. Alrawi, “The effects of S-glass fiber hybridization on vibration-damping behavior of intraply woven carbon/aramid hybrid composites for different lay-up configurations,” Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., vol. 233, no. 9, pp. 3220–3231, 2019, https://doi.org/10.1177/0954406218813188.Suche in Google Scholar

[6] M. R. Sanjay, G. R. Arpitha, P. Senthamaraikannan, M. Kathiresan, M. A. Saibalaji, and B. Yogesha, “The hybrid effect of jute/kenaf/E-glass woven fabric epoxy composites for medium load applications: impact, inter-laminar strength, and failure surface characterization,” J. Nat. Fibers, vol. 16, no. 4, pp. 600–612, 2019, https://doi.org/10.1080/15440478.2018.1431828.Suche in Google Scholar

[7] J. Zhang, K. Chaisombat, S. He, and C. H. Wang, “Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures,” Mater. Des., vol. 36, pp. 75–80, 2012, https://doi.org/10.1016/j.matdes.2011.11.006.Suche in Google Scholar

[8] V. Santhanam, R. Dhanaraj, M. Chandrasekaran, N. Venkateshwaran, and S. Baskar, “Experimental investigation on the mechanical properties of woven hybrid fiber reinforced epoxy composite,” Mater. Today: Proc., vol. 37, pp. 1850–1853, 2021, https://doi.org/10.1016/j.matpr.2020.07.444.Suche in Google Scholar

[9] G. Pincheira, C. Canales, C. Medina, E. Fernández, and P. Flores, “Influence of aramid fibers on the mechanical behavior of a hybrid carbon–aramid–reinforced epoxy composite,” Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., vol. 232, no. 1, pp. 58–66, 2018, https://doi.org/10.1177/1464420715612827.Suche in Google Scholar

[10] M. Aslan and E. G. Kaymaz, “Characterization of thick carbon/basalt hybrid fiber polyester composites with graphene nanoplatelets,” Mater. Test., vol. 62, no. 1, pp. 12–18, 2020, https://doi.org/10.3139/120.111457.Suche in Google Scholar

[11] S. L. Valença, S. Griza, V. G. de Oliveira, E. M. Sussuchi, and F. G. C. de Cunha, “Evaluation of the mechanical behavior of epoxy composite reinforced with Kevlar plain fabric and glass/Kevlar hybrid fabric,” Compos. Part B: Eng., vol. 70, pp. 1–8, 2015, https://doi.org/10.1016/j.compositesb.2014.09.040.Suche in Google Scholar

[12] N. Shaari, A. Jumahat, and M. K. M. Razif, “Impact resistance properties of Kevlar/glass fiber hybrid composite laminates,” J. Teknol., vol. 76, no. 3, pp. 93–99, 2015, https://doi.org/10.11113/jt.v76.5520.Suche in Google Scholar

[13] A. Erkliğ and M. Bulut, “Experimental investigation on tensile and Charpy impact behavior of Kevlar/S-glass/epoxy hybrid composite laminates,” J. Polym. Eng., vol. 37, no. 2, pp. 177–184, 2017, https://doi.org/10.1515/polyeng-2015-0538.Suche in Google Scholar

[14] W. D. Bascom and D. L. Hunston, “Fracture of eastomer-modified epoxy polymers,” Adv. Chem., vol. 222, pp. 135–172, 1989, https://doi.org/10.1021/ba-1989-0222.ch006.Suche in Google Scholar

[15] B. Wetzel, F. Haupert, and M. Qiu Zhang, “Epoxy nanocomposites with high mechanical and tribological performance,” Compos. Sci. Technol., vol. 63, no. 14, pp. 2055–2067, 2003, https://doi.org/10.1016/S0266-3538(03)00115-5.Suche in Google Scholar

[16] L. Botta, R. Scaffaro, F. Sutera, and M. C. Mistretta, “Reprocessing of PLA/Graphene nanoplatelets nanocomposites,” Polymers (Basel), vol. 10, no. 1, 2017, no. 18, https://doi.org/10.3390/polym10010018.Suche in Google Scholar PubMed PubMed Central

[17] P. Rawat and K. K. Singh, “An impact behavior analysis of CNT-based fiber reinforced composites validated by LS-DYNA: a review,” Polym. Compos., vol. 38, no. 1, pp. 175–184, 2017, https://doi.org/10.1002/pc.23573.Suche in Google Scholar

[18] A. Erkliğ, N. F. Doğan, and M. Bulut, “Charpy impact response of glass fiber reinforced composite with nano graphene enhanced epoxy,” Period. Eng. Nat. Sci., vol. 5, no. 3, 2017, https://doi.org/10.21533/pen.v5i3.121.Suche in Google Scholar

[19] N. F. Doğan, M. Bulut, A. Erkliğ, and Ö. Y. Bozkurt, “Mechanical and low velocity impact characterization of carbon/glass hybrid composites with graphene nanoplatelets,” Mater. Res. Express, vol. 6, no. 8, 2019, Art no. 085304, https://doi.org/10.1088/2053-1591/ab1c03.Suche in Google Scholar

[20] M.-Y. Shen, W.-Y. Liao, T.-Q. Wang, and W.-M. Lai, “Characteristics and mechanical properties of graphene nanoplatelets-reinforced epoxy nanocomposites: comparison of different dispersal mechanisms,” Sustainability, vol. 13, no. 4, p. 1788, 2021, https://doi.org/10.3390/su13041788.Suche in Google Scholar

[21] M. A. Rafiee, J. Rafiee, Z. Wang, H. Song, Z.-Z. Yu, and N. Koratkar, “Enhanced mechanical properties of nanocomposites at low graphene content,” ACS Nano, vol. 3, no. 12, pp. 3884–3890, 2009, https://doi.org/10.1021/nn9010472.Suche in Google Scholar PubMed

[22] N. Akçamlı, H. Gökçe, and D. Uzunsoy, “Processing and characterization of graphene nano-platelet (GNP) reinforced aluminum matrix composites,” Mater. Test., vol. 58, nos. 11–12, pp. 946–952, 2016, https://doi.org/10.3139/120.110944.Suche in Google Scholar

[23] X. Ji, Y. Xu, W. Zhang, L. Cui, and J. Liu, “Review of functionalization, structure and properties of graphene/polymer composite fibers,” Compos. Part A: Appl. Sci. Manuf., vol. 87, pp. 29–45, 2016, https://doi.org/10.1016/j.compositesa.2016.04.011.Suche in Google Scholar

[24] A. Shabani, A. Babaei, A. R. Zanjanijam, M. Ramezani, and M. Haji Abdolrasouli, “Investigating the mechanical, morphological, and thermal behavior of PA‐6/SAN/MWCNT blends: application of Taguchi experimental design,” Polym. Compos., vol. 40, no. 12, pp. 4753–4762, 2019, https://doi.org/10.1002/pc.25343.Suche in Google Scholar

[25] A. Lavoratti, A. J. Zattera, and S. C. Amico, “Effect of carbonaceous nanofillers and triblock copolymers on the toughness of epoxy resin,” Polym. Bull., vol. 78, no. 10, pp. 1–14, 2020, https://doi.org/10.1007/s00289-020-03375-1.Suche in Google Scholar

[26] U. R. Hashim, A. Jumahat, and M. Jawaid, “Mechanical properties of hybrid graphene nanoplatelet-nanosilica filled unidirectional basalt fibre composites,” Nanomaterials, vol. 11, no. 6, 2021, no. 1468, https://doi.org/10.3390/nano11061468.Suche in Google Scholar PubMed PubMed Central

[27] Y. E. Erdoğdu, E. E. Korkmaz, and Ş. Temiz, “Effect of graphene nanoplatelet filling on mechanical properties of natural fiber reinforced polymer composites,” Mater. Test., vol. 63, no. 4, pp. 322–328, 2021, https://doi.org/10.1515/mt-2020-0046.Suche in Google Scholar

[28] I. Özsoy, A. Mimaroglu, and H. Unal, “Comparison of the tribological and mechanical performance for nano and micro filler epoxy composites,” Mater. Test., vol. 58, no. 6, pp. 526–530, 2016, https://doi.org/10.3139/120.110893.Suche in Google Scholar

[29] J. A. King, D. R. Klimek, I. Miskioglu, and G. M. Odegard, “Mechanical properties of graphene nanoplatelet/epoxy composites,” J. Appl. Polym. Sci., vol. 128, no. 6, pp. 4217–4223, 2013, https://doi.org/10.1002/app.38645.Suche in Google Scholar

[30] A. S. Rahman, V. Mathur, and R. Asmatulu, “Effect of nanoclay and graphene inclusions on the low-velocity impact resistance of Kevlar-epoxy laminated composites,” Compos. Struct., vol. 187, pp. 481–488, 2018, https://doi.org/10.1016/j.compstruct.2017.12.054.Suche in Google Scholar

[31] M. Ali Charfi, R. Mathieu, J.-F. Chatelain, C. Ouellet-Plamondon, and G. Lebrun, “Effect of graphene additive on flexural and interlaminar shear strength properties of carbon fiber-reinforced polymer composite,” J. Compos. Sci., vol. 4, no. 4, p. 162, 2020, https://doi.org/10.3390/jcs4040162.Suche in Google Scholar

[32] M. Alsaadi, M. Bulut, A. Erkliğ, and A. Jabbar, “Nano-silica inclusion effects on mechanical and dynamic behavior of fiber reinforced carbon/Kevlar with epoxy resin hybrid composites,” Compos. Part B: Eng., vol. 152, pp. 169–179, 2018, https://doi.org/10.1016/j.compositesb.2018.07.015.Suche in Google Scholar

[33] A. Mohanty and V. K. Srivastava, “Effect of alumina nanoparticles on the enhancement of impact and flexural properties of the short glass/carbon fiber reinforced epoxy based composites,” Fibers Polym., vol. 16, no. 1, pp. 188–195, 2015, https://doi.org/10.1007/s12221-015-0188-5.Suche in Google Scholar

[34] L.-C. Tang, Y.-J. Wan, D. Yan, and Y.-B. Pei, “The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites,” Carbon, vol. 60, pp. 16–27, 2013, https://doi.org/10.1016/j.carbon.2013.03.050.Suche in Google Scholar

[35] M. Siegfried, C. Tola, M. Claes, S. V. Lomov, I. Verpoest, and L. Gorbatikh, “Impact and residual after impact properties of carbon fiber/epoxy composites modified with carbon nanotubes,” Compos. Struct., vol. 111, pp. 488–496, 2014, https://doi.org/10.1016/j.compstruct.2014.01.035.Suche in Google Scholar

[36] I. Zaman, H.-S. Kuan, J. Dai, and N. Kawashima, “From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites,” Nanoscale, vol. 4, no. 15, pp. 4578–4586, 2012, https://doi.org/10.1039/c2nr30837a.Suche in Google Scholar PubMed

[37] P. O. Sjoblom, J. T. Hartness, and T. M. Cordell, “On low-velocity impact testing of composite materials,” J. Compos. Mater., vol. 22, no. 1, pp. 30–52, 1988, https://doi.org/10.1177/002199838802200103.Suche in Google Scholar

[38] F. Sarasini, J. Tirillo, L. Ferrante, et al.., “Drop-weight impact behaviour of woven hybrid basalt–carbon/epoxy composites,” Compos. Part B: Eng., vol. 59, pp. 204–220, 2014, https://doi.org/10.1016/j.compositesb.2013.12.006.Suche in Google Scholar

[39] W. Qin, F. Vautard, L. T. Drzal, and J. Yu, “Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase,” Compos. Part B: Eng., vol. 69, pp. 335–341, 2015, https://doi.org/10.1016/j.compositesb.2014.10.014.Suche in Google Scholar

[40] R. Park and J. Jang, “Impact behavior of aramid fiber/glass fiber hybrid composites: the effect of stacking sequence,” Polym. Compos., vol. 22, no. 1, pp. 80–89, 2001, https://doi.org/10.1002/pc.10519.Suche in Google Scholar

[41] A. Mohanty, M. A. Khan, and G. Hinrichsen, “Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites,” Compos. Sci. Technol., vol. 60, no. 7, pp. 1115–1124, 2000, https://doi.org/10.1016/S0266-3538(00)00012-9.Suche in Google Scholar
Published Online: 2022-04-07
Published in Print: 2022-04-26

© 2022 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Effect of deep cryogenic treatment on microstructure and mechanical properties of a CoCrFeNiMo medium-entropy alloy
  3. Bilayer growth kinetics and tribological characterization of boronized AISI M2 steel
  4. Effect of graphene nanoplatelets on mechanical and impact properties of an aramid/glass-reinforced epoxy composite
  5. The effect of SiC content on microstructural and tribological properties of sintered B4C and SiC reinforced Al–Cu–Mg–Si matrix hybrid composites
  6. Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears
  7. Hunger games search algorithm for global optimization of engineering design problems
  8. Alumina catalyst waste utilization for aluminum-based composites using the friction stir process
  9. Comparison of microstructure and wear behaviors of PTA coated AISI 304 with alumina, boron and ekaboron III powder
  10. Influence of testers on the ISE effect
  11. Crashworthiness design of heat treated vehicle parts with tailored properties
  12. Shape coefficient of impact-echo for small-size short cylinder/circular tube structures
  13. Resistance spot welding of Al6061 lap joints with a polyvinyl alcohol-bonded graphene interlayer
  14. Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites
  15. Prediction and optimization of thrust force during the drilling of AISI 2080 steel
https://doi.org/10.1515/mt-2021-2064
Schlagwörter für diesen Artikel
aramid fiber; glass fiber; graphene nanoplatelets; hybrid fiber; low-velocity impact

Artikel in diesem Heft

  1. Frontmatter
  2. Effect of deep cryogenic treatment on microstructure and mechanical properties of a CoCrFeNiMo medium-entropy alloy
  3. Bilayer growth kinetics and tribological characterization of boronized AISI M2 steel
  4. Effect of graphene nanoplatelets on mechanical and impact properties of an aramid/glass-reinforced epoxy composite
  5. The effect of SiC content on microstructural and tribological properties of sintered B4C and SiC reinforced Al–Cu–Mg–Si matrix hybrid composites
  6. Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears
  7. Hunger games search algorithm for global optimization of engineering design problems
  8. Alumina catalyst waste utilization for aluminum-based composites using the friction stir process
  9. Comparison of microstructure and wear behaviors of PTA coated AISI 304 with alumina, boron and ekaboron III powder
  10. Influence of testers on the ISE effect
  11. Crashworthiness design of heat treated vehicle parts with tailored properties
  12. Shape coefficient of impact-echo for small-size short cylinder/circular tube structures
  13. Resistance spot welding of Al6061 lap joints with a polyvinyl alcohol-bonded graphene interlayer
  14. Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites
  15. Prediction and optimization of thrust force during the drilling of AISI 2080 steel
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2026 De Gruyter Brill
Heruntergeladen am 2.1.2026 von https://www.degruyterbrill.com/document/doi/10.1515/mt-2021-2064/html
Button zum nach oben scrollen