Methodology considering surface roughness in UV water disinfection reactors

7 References

Ahsan, M. (2014). Numerical analysis of friction factor for a fully developed turbulent flow using k-ε turbulence model with enhanced wall treatment. Beni-Suef University Journal of Basic and Applied Sciences, 3, 269—277. DOI: 10.1016/j.bjbas.2014.12.001.10.1016/j.bjbas.2014.12.001Suche in Google Scholar

ANSYS (2015). ANSYS®Fluent, Academic research, release 15.0. [computer software]. Canonsburg, PA, USA: ANSYS Inc.Suche in Google Scholar

Antonia, R. A., & Krogstad, P. A. (2000). Effect of different surface roughnesses on a turbulent boundary layer. Journal of the Brazilian Society of Mechanical Sciences, 22(1), 1—15. DOI: 10.1590/s0100-73862000000100001.10.1590/S0100-73862000000100001Suche in Google Scholar

Asker, M., Turgut, O. E., & Coban, M. T. (2014). A review of non iterative friction factor correlations for the calculation of pressure drop in pipes. Bitlis Eren University Journal of Science and Technology, 4, 1—8.10.17678/beujst.90203Suche in Google Scholar

Bolton, J. R. (2000). Calculation of ultraviolet fluence rate distributions in an annular reactor: significance of refraction and reflection. Water Research, 34, 3315—3324. DOI: 10.1016/s0043-1354(00)00087-7.10.1016/S0043-1354(00)00087-7Suche in Google Scholar

Brkic, D. (2011). Review of explicit approximations to the Cole- brook relation for flow friction. Journal ofPetroleum Science & Engineering, 77, 34-48. DOI: 10.1016/j.petrol.2011.02.006.10.1016/j.petrol.2011.02.006Suche in Google Scholar

Brkic, D. (2012). Can pipes be actually really that smooth? International Journal of Refrigeration, 35, 209-215. DOI: 10.1016/j.ijrefrig.2011.09.012.10.1016/j.ijrefrig.2011.09.012Suche in Google Scholar

Castro, I. P. (2009). Turbulent flow over rough walls. In B. Eckhardt (Ed.), Advances in turbulence XII (Springer Proceedings in Physics, Vol. 132, pp. 381-388). Berlin, Germany: Springer. DOI: 10.1007/978-3-642-03085-7_92.10.1007/978-3-642-03085-7_92Suche in Google Scholar

Chen, Y. P., Fu, P. P., Zhang, C. B., & Shi, M. H. (2010). Numerical simulation of laminar heat transfer in microchannels with rough surfaces characterized by fractal Cantor structures. International Journal ofHeat and Fluid Flow, 31, 622629. DOI: 10.1016/j.ijheatfluidflow.2010.02.017.10.1016/j.ijheatfluidflow.2010.02.017Suche in Google Scholar

Chen, J. Y., Deng, B. Q., & Kim, C. N. (2011). Computational fluid dynamics (CFD) modeling of UV disinfection in a closed-conduit reactor. Chemical Engineering Science, 66, 4983-4990. DOI: 10.1016/j.ces.2011.06.043.10.1016/j.ces.2011.06.043Suche in Google Scholar

Chiu, K., Lyn, D., Savoye, P., & Blatchley, E., III. (1999). Integrated UV disinfection model based on particle tracking. Journal of Environmental Engineering, 125, 7-16. DOI: 10.1061/(asce)0733-9372(1999)125:1(7).10.1061/(ASCE)0733-9372(1999)125:1(7)Suche in Google Scholar

Clauser, F. H. (1954). Turbulent boundary layers in adverse pressure gradients. Journal of the Aeronautical Sciences, 21, 91-108.10.2514/8.2938Suche in Google Scholar

Colebrook, C. F. (1939). Turbulent flow in pipes, with particular reference to the transition region between the smooth and rough pipe laws. Journal of the Institution of Civil Engineers, 11(4), 133-156. DOI: 10.1680/ijoti.1939.13150.10.1680/ijoti.1939.13150Suche in Google Scholar

Concha, F. (2008). Settling velocities of particulate systems 15: Velocities in turbulent Newtonian flows. International Journal of Mineral Processing, 88, 89-93. DOI: 10.1016/j.minpro.2008.06.008.10.1016/j.minpro.2008.06.008Suche in Google Scholar

Ducoste, J. J., Liu, D., & Linden, K. (2005). Alternative approaches to modeling fluence distribution and microbial inactivation in ultraviolet reactors: Lagrangian versus Eule- rian. Journal of Environmental Engineering, 131, 1393-1403. DOI: 10.1061/(asce)0733-9372(2005)131:10(1393).10.1061/(ASCE)0733-9372(2005)131:10(1393)Suche in Google Scholar

Farshad, F., Rieke, H., & Garber, J. (2001). New developments in surface roughness measurements, characterization, and modeling fluid flow in pipe. Journal of Petroleum Science and Engineering, 29, 139-150. DOI: 10.1016/s0920- 4105(01)00096-1.10.1016/S0920-4105(01)00096-1Suche in Google Scholar

Gamrat, G., Favre-Marinet, M., & Le Person, S. (2009). Modelling of roughness effects on heat transfer in thermally fully-developed laminar flows through microchannels. International Journal of Thermal Sciences, 48, 2203-2214. DOI: 10.1016/j.ijthermalsci.2009.04.006.10.1016/j.ijthermalsci.2009.04.006Suche in Google Scholar

Graham, D. I., & Moyeed, R. A. (2002). How many particles for my Lagrangian simulations? Powder Technology, 125, 179186. DOI: 10.1016/s0032-5910(01)00504-6.10.1016/S0032-5910(01)00504-6Suche in Google Scholar

Hama, F. R. (1954). Boundary-layer characteristics for smooth and rough surfaces. New York, NY, USA: Society for Naval Architects and Marine Engineers.Suche in Google Scholar

Jeng, Y. R. (1990). Experimental study of the effects of surface roughness on friction. Tribology Transactions, 33, 402-410. DOI: 10.1080/10402009008981970.10.1080/10402009008981970Suche in Google Scholar

Ji, Y., Yuan, K., & Chung, J. N. (2006). Numerical simulation of wall roughness on gaseous flow and heat transfer in a microchannel. International Journal of Heat and Mass Transfer, 49, 1329-1339. DOI: 10.1016/j.ijheatmasstransfer.2005. 10.011.10.1016/j.ijheatmasstransfer.2005.10.011Suche in Google Scholar

Kandlikar, S. G., Schmitt, D., Carrano, A. L., & Taylor, J. B. (2005). Characterization of surface roughness effects on pressure drop in single-phase flow in minichannels. Physics of Fluids, 17(10), 100606. DOI: 10.1063/1.1896985.10.1063/1.1896985Suche in Google Scholar

Krogstad, P. A. (1991). Modification of the van Driest damping function to include the effects of surface roughness. AIAA Journal, 29, 888-894. DOI: 10.2514/3.10675.10.2514/3.10675Suche in Google Scholar

Krogstad, P. Ä., & Antonia, R. A. (1999). Surface roughness effects in turbulent boundary layers. Experiments in Fluids, 27, 450-460. DOI: 10.1007/s003480050370.10.1007/s003480050370Suche in Google Scholar

Kumar, S., & Saini, R. P. (2009). CFD based performance analysis of a solar air heater duct provided with artificial roughness. Renewable Energy, 34, 1285-1291. DOI: 10.1016/j.renene.2008.09.015.10.1016/j.renene.2008.09.015Suche in Google Scholar

Li, M. K., Qiang, Z. M., Li, T. G., Bolton, J. R., & Liu, C. L. (2011). In situ measurement of UV fluence rate distribution by use of a micro fluorescent silica detector. Environmental Science & Technology, 45, 3034-3039. DOI: 10.1021/es103796v.10.1021/es103796vSuche in Google Scholar

Liu, D., Ducoste, J., Jin, S. S., & Linden, K. (2004). Evaluation of alternative fluence rate distribution models. Aqua, 53, 391408.10.2166/aqua.2004.0031Suche in Google Scholar

Liu, D., Wu, C., Linden, K., & Ducoste, J. (2007). Numerical simulation of UV disinfection reactors: Evaluation of alternative turbulence models. Applied Mathematical Modelling, 31, 1753-1769. DOI: 10.1016/j.apm.2006.06.004.10.1016/j.apm.2006.06.004Suche in Google Scholar

Moody, L. F. (1944). Friction factors for pipe flow. Transactions of the ASME, 66, 671-684.10.1115/1.4018140Suche in Google Scholar

Munoz, A., Craik, S., & Kresta, S. (2007). Computational fluid dynamics for predicting performance of ultraviolet disinfection — sensitivity to particle tracking inputs. Journal of the Environmental Engineering and Science, 6, 285-301. DOI: 10.1139/s06-045.10.1139/s06-045Suche in Google Scholar

Pailhas, G., Touvet, Y., & Aupoix, B. (2008). Effects of Reynolds number and adverse pressure gradient on a turbulent boundary layer developing on a rough surface. Journal of Turbulence, 9, N43. DOI: 10.1080/14685240802562020.10.1080/14685240802562020Suche in Google Scholar

Qasim, S. R. (1999). Wastewater treatment plants: Planning, design and operation (2nd ed.). Boca Raton, FL, USA: CRC Press.10.1201/9780203734209Suche in Google Scholar

Qualls, R. G., & Johnson, J. D. (1985). Modeling and efficiency of ultraviolet disinfection systems. Water Research, 19, 10391046. DOI: 10.1016/0043-1354(85)90374-4.10.1016/0043-1354(85)90374-4Suche in Google Scholar

Rao, A. R., & Kumar, B. (2009). Transition of turbulent pipe flow. Journal of Hydraulic Research, 47, 529-533. DOI: 10.1080/00221686.2009.9522029.10.1080/00221686.2009.9522029Suche in Google Scholar

Saleh, O. A. B. (2005). Fully developed turbulent smooth and rough channel and pipe flows. PhD thesis, University of Erlangen-Nuremberg, Erlangen, Germany.Suche in Google Scholar

Schlichting, H., & Gersten, K. (2000). Boundary-layer theory. Berlin, Germany: Springer.10.1007/978-3-642-85829-1Suche in Google Scholar

Schultz, M. P., & Flack, K. A. (2009). Turbulent boundary layers on a systematically varied rough wall. Physics of Fluids, 21(1), 015104. DOI: 10.1063/1.3059630.10.1063/1.3059630Suche in Google Scholar

Scibilia, M. F. (2000). Heat transfer in a forced wall jet on a heated rough surface. Journal of Thermal Science, 9, 85—92. DOI: 10.1007/s11630-000-0048-4.10.1007/s11630-000-0048-4Suche in Google Scholar

Sonnad, J. R., & Goudar, C. T. (2004). Constraints for using Lambert W function-based explicit Colebrook—White equation. Journal of Hydraulic Engineering, 130, 929—931. DOI: 10.1061/(asce)0733-9429(2004)130:9(929).10.1061/(ASCE)0733-9429(2004)130:9(929)Suche in Google Scholar

Sonnad, J. R., & Goudar, C. T. (2006). Turbulent flow friction factor calculation using a mathematically exact alternative to the Colebrook—White equation. Journal of Hydraulic Engineering, 132, 863—867. DOI: 10.1061/(asce)0733- 9429(2006)132:8(863).10.1061/(ASCE)0733-9429(2006)132:8(863)Suche in Google Scholar

Sonnad, J. R., & Goudar, C. T. (2007). Explicit reformulation of the Colebrook—White equation for turbulent flow friction factor calculation. Industrial & Engineering Chemistry Research, 46, 2593-2600. DOI: 10.1021/ie0340241.10.1021/ie0340241Suche in Google Scholar

Taylor, J. B., Carrano, A. L., & Kandlikar, S. G. (2006). Characterization of the effect of surface roughness and texture on fluid flow—past, present, and future. International Journal of Thermal Sciences, 45, 962-968. DOI: 10.1016/j.ijthermalsci.2006.01.004.10.1016/j.ijthermalsci.2006.01.004Suche in Google Scholar

Tournier, A., Deglise, X., Andre, J. C., & Niclause, M. (1982). Experimental determination of the light distribution in a photochemical reactor: Influence of the concentration of an absorbing substance on this profile. AIChE Journal, 28, 156166. DOI: 10.1002/aic.690280123.10.1002/aic.690280123Suche in Google Scholar

Townsend, A. A. R. (1980). The structure of turbulent shear flow (2nd ed.) Cambridge, UK: Cambridge University Press.Suche in Google Scholar

USEPA (2006). Ultraviolet disinfection guidance manual for the final long term 2 enhanced surface water treatment rule. Washington, DC, USA: US Environmental Protection Agency.Suche in Google Scholar

Watson, H. E. (1908). A note on the variation of the rate of disinfection with change in the concentration of the disinfectant. The Journal of Hygiene (London), 8, 536-542.10.1017/S0022172400015928Suche in Google Scholar

White, F. M. (1979). Fluid mechanics. New York, NY, USA: McGraw-Hill.Suche in Google Scholar

Xu, C., Zhao, X. S., & Rangaiah, G. (2013). Performance analysis of ultraviolet water disinfection reactors using computational fluid dynamics simulation. Chemical Engineering Journal, 221, 398-406. DOI: 10.1016/j.cej.2013.01.108.10.1016/j.cej.2013.01.108Suche in Google Scholar

Xu, C., Rangaiah, G. P., & Zhao, X. S. (2015). A computational study of the effect of lamp arrangements on the performance of ultraviolet water disinfection reactors. Chemical Engineering Science, 122, 299-306. DOI: 10.1016/j.ces.2014.09.041.10.1016/j.ces.2014.09.041Suche in Google Scholar

Yildirim, G. (2009). Computer-based analysis of explicit approximations to the implicit Colebrook-White equation in turbulent flow friction factor calculation. Advances in Engineering Software, 40, 1183-1190. DOI: 10.1016/j.advengsoft. 2009.04.004.10.1016/j.advengsoft.2009.04.004Suche in Google Scholar

Zhang, C. B., Chen, Y. P., & Shi, M. H. (2010). Effects of roughness elements on laminar flow and heat transfer in microchannels. Chemical Engineering and Processing: Process Intensification, 49, 1188-1192. DOI: 10.1016/j.cep.2010.08.022.10.1016/j.cep.2010.08.022Suche in Google Scholar

Zidan, A. R. A. (2015). A review of friction formulae in open channel flow. In Proceedings of the 18th International Water Technology Conference, IWTC18, March 12-14, 2015 (pp. 322-335). Sharm El-Sheikh, Egypt: International Water Technology Association.Suche in Google Scholar