Article
Licensed
Unlicensed
Requires Authentication
Conferences/Konferenzen
Published/Copyright:
February 1, 2022
Published Online: 2022-02-01
© 2005 Carl Hanser Verlag, München
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Frontmatter
- Articles Basic
- Diffusion in molybdenum disilicide
- Martensitic transformation, ductility, and shape-memory effect of polycrystalline Ni56Mn25 – xFexGa19 alloys
- Mechanical and electrical properties of Ti2SnC dispersion-strengthened copper
- Thermodynamic and phase relation study of the Ni–Ge –O system in the solid state
- Thermodynamic assessment of Mg–Al–Mn phase equilibria, focusing on Mg-rich alloys
- DSC study on the phase decomposition of an Al–Cu alloy occurring during annealing at 403 K
- Structure and thermal stability of a melt-quenched single-phase nanocrystalline Hf61Fe39 alloy
- Thermodynamic assessment of the ternary Cu–Pb–O system
- Combined EELS, EDX, and STEM investigations of Cu-induced nanostrucutures and thin surface layer phases
- Articles Applied
- Fatigue failure of titanium implants for mandibular reconstruction
- Solid state reaction mechanism for the synthesis of La1 – xSrxCoO3–δ (0.1 ≤ x ≤ 0.7)
- Dislocation structures in 16MND5 pressure vessel steel strained in uniaxial tension at –196 °C
- Microstructure of AZ91 alloy deformed by equal channel angular pressing
- The effect of copper on secondary phase precipitation in duplex stainless steel – a thermodynamic calculations approach
- Stretch-zone analysis by image processing for the evaluation of initiation fracture toughness of a HSLA steel
- Copper-lithium alloy produced by powder metallurgy procedures and its age-hardening response
- Effects of the local microstructures on the mechanical properties in FSWed joints of a 7075-T6 Al alloy
- Estimating ternary surface tension for systems with limited solubility
- Notifications/Mitteilungen
- Personal/Personelles
- News/Aktuelles
- Conferences/Konferenzen
Articles in the same Issue
- Frontmatter
- Articles Basic
- Diffusion in molybdenum disilicide
- Martensitic transformation, ductility, and shape-memory effect of polycrystalline Ni56Mn25 – xFexGa19 alloys
- Mechanical and electrical properties of Ti2SnC dispersion-strengthened copper
- Thermodynamic and phase relation study of the Ni–Ge –O system in the solid state
- Thermodynamic assessment of Mg–Al–Mn phase equilibria, focusing on Mg-rich alloys
- DSC study on the phase decomposition of an Al–Cu alloy occurring during annealing at 403 K
- Structure and thermal stability of a melt-quenched single-phase nanocrystalline Hf61Fe39 alloy
- Thermodynamic assessment of the ternary Cu–Pb–O system
- Combined EELS, EDX, and STEM investigations of Cu-induced nanostrucutures and thin surface layer phases
- Articles Applied
- Fatigue failure of titanium implants for mandibular reconstruction
- Solid state reaction mechanism for the synthesis of La1 – xSrxCoO3–δ (0.1 ≤ x ≤ 0.7)
- Dislocation structures in 16MND5 pressure vessel steel strained in uniaxial tension at –196 °C
- Microstructure of AZ91 alloy deformed by equal channel angular pressing
- The effect of copper on secondary phase precipitation in duplex stainless steel – a thermodynamic calculations approach
- Stretch-zone analysis by image processing for the evaluation of initiation fracture toughness of a HSLA steel
- Copper-lithium alloy produced by powder metallurgy procedures and its age-hardening response
- Effects of the local microstructures on the mechanical properties in FSWed joints of a 7075-T6 Al alloy
- Estimating ternary surface tension for systems with limited solubility
- Notifications/Mitteilungen
- Personal/Personelles
- News/Aktuelles
- Conferences/Konferenzen