Startseite Strain rate dependence of the deformation mechanisms in a fully lamellar γ-TiAl-based alloy
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Strain rate dependence of the deformation mechanisms in a fully lamellar γ-TiAl-based alloy

  • Arno Bartels , Helmut Clemens EMAIL logo , Gerhard Dehm , Erhardt Lach und Wolfram Schillinger
Veröffentlicht/Copyright: 27. Dezember 2021
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 93 Heft 3

Abstract

The intention of this study was to investigate the mechanical properties of an engineering γ-TiAl-based alloy with fully lamellar microstructure under quasistatic and dynamic compression at room temperature and strain rates ranging from 5.0 × 10–3 s–1 to 4.0 × 103 s–1 The microstructure of undeformed and deformed specimens was investigated by means of optical and electron microscopy. The results of the compression tests exhibit a slight strain rate sensitivity of the postyield stress. The fracture behavior of the studied γ-TiAl alloy strongly depends on the applied strain rates. Transmission electron microscopy observations conducted on deformed specimens revealed the existence of a high number of tangled ordinary dislocations, curved superdislocations and mechanical twins. The analysis of the deformation texture confirms the high activity of superdislocations and mechanical twinning during dynamic compression testing.

Keywords: γ-TiAl-based alloys; Fully lamellar microstructure; Dynamic compression tests; Deformation behaviour; Texture
Prof. Dr. Helmut Clemens Institut für Werkstoffforschung GKSS Forschungszentrum GmbH Max-Planck-Str., D-21502 Geesthacht, Germany Tel.: +49 4152 87 2502 Fax: +49 4152 87 2666

Dedicated to Professor Dr. mont. Karl Leopold Maurer on the occasion of his 75th birthday

  1. The authors A.B. and W.S. gratefully acknowledge the support of this work in the frame of the Collaborative Research Centre 371 “Micromechanics of Multiphase Materials” of the German Research Society (DFG).

References

1 Hemker, K.; Dimiduk, D.; Clemens, H.; Darolia, R.; Inui, H.; Larsen, J.; Sikka, V.; Thomas, M.; Whittenberger, D. (eds.): Structural Intermetallics 2001, TMS, Warrendale, PA (2001).Suche in Google Scholar

2 Clemens, H.; Kestler, H.: Adv. Eng. Mater. 2 (2000) 551.10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-USuche in Google Scholar

3 Appel, F; Wagner, R.: Mat. Sci. Eng. R 22 (1998) 187.10.1016/S0927-796X(97)00018-1Suche in Google Scholar

4 Hemker, K.J; Lu, M.; Zupan, M., in: Nathal, M.V.; Darolia, R.; Liu, C.T.; Martin, P.L.; Miracle, D.B.;Wagner, R.; Yamaguchi, M. (eds.), Structural Intermetallics 1997, TMS, Warrendale, PA (1997) 147.Suche in Google Scholar

5 Jin, Z.; Gray III, G.T.; Kim, Y.-W., Yamaguchi, M.: As Ref. [4], p. 225.Suche in Google Scholar

6 Maloy, S.M.; Gray III, G.T., in: Kim, Y.-W.,Wagner, R., Yamaguchi, M. (eds), Gamma Titanium Aluminides, TMS, Warrendale, PA (1995) 307.Suche in Google Scholar

7 Maloy, S.M.; Gray III, G.T.: Acta mater. 44 (1996) 1741.10.1016/1359-6454(95)00329-0Suche in Google Scholar

8 Jin, Z.; Cady, C.; Gray III, G.T.; Kim, Y.-W.: Metall. Trans. A 31 (2000) 1007.10.1007/s11661-000-0042-1Suche in Google Scholar

9 Gardinier, P.; Miguelez, H.; Cortez, R.; Lepetitcorps, Y.; Dodd, B.; Navarro, C.: J. Physique 7 (1997) 593.Suche in Google Scholar

10 Zhou, Y.; Xia, Y.: J. Mat. Sci. 34 (2000) 925.10.1023/A:1004754525806Suche in Google Scholar

11 Clemens, H.: Z. Metallkd. 86 (1995) 814.Suche in Google Scholar

12 Clemens, H.; Jeglitsch, F.: Pract. Metallography 37 (2000) 194.10.1515/pm-2000-370404Suche in Google Scholar

13 Chatterjee, A.; Bolay, U.; Sattler, U.; Clemens, H.: Intermetallics and Superalloys, Vol. 10, Wiley-VCH, Weinheim (2000) 233.Suche in Google Scholar

14 Eberhardt, N.: Ph. D. Thesis, University of Leoben, Leoben (1999).Suche in Google Scholar

15 Eberhardt, N.; Lorich, A.; Jörg, R.; Kestler, H.; Knabl, W.; Baur; H.; Joos, R.; Clemens, H.: Z. Metallkd. 89 (1998) 772.Suche in Google Scholar

16 Hebesberger, T.; Semprimoschnig, C.O.A.; Pippan, R.; Kolednik, O.; Clemens, H., in: Kim, Y.-W.; Dimiduk, D.M.; Loretto, M.H. (eds.), Gamma Titanium Aluminides 1999, TMS, Warrendale, PA (1999) 573.Suche in Google Scholar

17 Hopkinson, B.: Proc. R. Soc. A 74 (1905) 498.Suche in Google Scholar

18 Lach, E.: ISL-Report, RT 509/89, Saint-Louis (1989).Suche in Google Scholar

19 Lichtenberger, A.; Gazeaud, G.; Lach, E.: J. Physique 49 (1988) 589.Suche in Google Scholar

20 Dahms, M. Bunge, H.J.: Textures Microstruct. 8–9 (1988) 97.10.1155/TSM.8-9.97Suche in Google Scholar

21 Bartels, A.; Koeppe, C.; Zhang, T.; Mecking, H.: As Ref. [6], p. 655.Suche in Google Scholar

22 Mecking, H.:Work Hardening in Tension and Fatigue, ASM, New York (1977) 67.Suche in Google Scholar

23 Bartels, A.; Hartig, Ch.; Willems, S; Uhlenhut, H.: Mat. Sci. Eng. A 239–240 (1997) 14.10.1016/S0921-5093(97)00556-XSuche in Google Scholar

24 Mecking, H.; Hartig, Ch.; Kocks, U.F.: Acta mater. 44 (1996) 1309.10.1016/1359-6454(95)00308-8Suche in Google Scholar
Received: 2001-12-17
Published Online: 2021-12-27

© 2002 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Articles/Aufsätze
  3. Strain rate dependence of the deformation mechanisms in a fully lamellar γ-TiAl-based alloy
  4. Experimental and thermodynamic assessment of the Fe –Gd–Zr system
  5. Phase diagram of the Fe –Co –Ti system at 1073 K
  6. Copper concentration inside Guinier-Preston I zones formed in an Al –Cu alloy
  7. Identification of precipitates in 6013 aluminum alloy (Al –Mg –Si –Cu)
  8. Redistribution of phosphorus and carbon in steel weldments
  9. Microstructure and compressive properties of in situ synthesized TiC/Ti composites
  10. Effect of Al on the glass forming ability of Zr–Ni –Cu–Al alloys
  11. Fcc-hcp transformation-related internal friction in Fe –Mn alloys
  12. High-temperature stress and strain partitioning in duplex stainless steel
  13. Load sequence effects in the high cycle fatigue of two ferrite-pearlite microalloyed steels
  14. Characterization of intermetallic compounds formed during the interfacial reactions of liquid Sn and Sn– 58Bi solders with Ni substrates
  15. Notifications/Mitteilungen
  16. Personal/Personelles
https://doi.org/10.3139/ijmr-2002-0035
Schlagwörter für diesen Artikel
γ-TiAl-based alloys; Fully lamellar microstructure; Dynamic compression tests; Deformation behaviour; Texture

Artikel in diesem Heft

  1. Frontmatter
  2. Articles/Aufsätze
  3. Strain rate dependence of the deformation mechanisms in a fully lamellar γ-TiAl-based alloy
  4. Experimental and thermodynamic assessment of the Fe –Gd–Zr system
  5. Phase diagram of the Fe –Co –Ti system at 1073 K
  6. Copper concentration inside Guinier-Preston I zones formed in an Al –Cu alloy
  7. Identification of precipitates in 6013 aluminum alloy (Al –Mg –Si –Cu)
  8. Redistribution of phosphorus and carbon in steel weldments
  9. Microstructure and compressive properties of in situ synthesized TiC/Ti composites
  10. Effect of Al on the glass forming ability of Zr–Ni –Cu–Al alloys
  11. Fcc-hcp transformation-related internal friction in Fe –Mn alloys
  12. High-temperature stress and strain partitioning in duplex stainless steel
  13. Load sequence effects in the high cycle fatigue of two ferrite-pearlite microalloyed steels
  14. Characterization of intermetallic compounds formed during the interfacial reactions of liquid Sn and Sn– 58Bi solders with Ni substrates
  15. Notifications/Mitteilungen
  16. Personal/Personelles
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 25.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2002-0035/html
Button zum nach oben scrollen